Plate core: fire pore model building board from extruded polystyrene foam, Surface: rough (not sheared), Characteristics: extremely pressure-resistant (high density), certified per EN 13501-1: Euroclass E, conforms to DIN 4102-1: building material c ...
27 Variants
Polystyrene white, matte
from 1,45 €
Characteristics: impact-resistant, Dimensions: usable dimensions=guaranteed minimum, Surface: One side: matte. Other side: shiny.
20 Variants
Styrofoam light blue, trimmed
from 1,50 €
Plate core: fine pore insulation panel made from extruded polystyrene foam, Surface: smooth (sheared), Characteristics: extremely pressure-resistant (high density), certified per EN 13501-1, conforms to DIN 4102: building material class B1 (flame ...
11 Variants
Polystyrene sphere, transparent, hollow
from 0,70 €
material: polystyrene
10 Variants
Plastic boxes, transparent, rectangular
from 0,50 €
material: polystyrene, equipment: with lid, without European standard holes for hanging, Dimensions: given dimensions: outer l x w x h (inner dimensions are 2 - 3 mm smaller depending on box size)
9 Variants
Polystyrene mirror, coloured, smooth
from 5,90 €
Front side: mirrored with protective film
8 Variants
ASA round rod, white
from 1,85 €
matte
7 Variants
Plastic boxes, transparent, square
from 0,80 €
material: polystyrene, equipment: with lid, without European standard holes for hanging, Dimensions: given dimensions: outer l x w x h (inner dimensions are 2 - 3 mm smaller depending on box size)
3 Variants
Styrofoam, light blue, untrimmed
from 5,10 €
Plate core: medium pore insulating block made out of extruded polystyrene foam, Surface: smooth, semi-gloss surface, Characteristics: compression resistant, certified per EN 13501-1, conforms to DIN 4102: construction material class B1 (flame resistant)
3 Variants
Polystyrene rigid foam, silver-grey, untrimmed
from 8,50 €
Plate core: fire pore model building board from extruded polystyrene foam, Surface: glossy (untrimmed), Characteristics: extremely pressure-resistant (high density), certified per EN 13501-1: Euroclass E, conforms to DIN 4102-1: building material c ...
77 Variants
ABS round tube, opaque, coloured
from 1,90 €
opaque, glossy, given dimensions: outer diameter x inner diameter
13 Variants
Polystyrene foam ball
from 1,80 €
material: polystyrene, medium-pored
9 Variants
Plastic containers, transparent, round
from 0,90 €
material: polystyrene, design: letters in ( ) see information text
Preiser detailed-figures, unpainted, white, 1:100
from 44,90 €
material: polystyrene
31 Variants
Polystyrene right-angled strips, short, white
from 6,80 €
matte, sawn
10 Variants
Polystyrene round strips, white
from 6,80 €
matte
47 Variants
Polystyrene rectangular strips, long, white
from 1,30 €
matte, sawn
New Range
4 Variants
Hermoli detail model figures, unpainted, white, 1:50
from 9,50 €
polystyrene, semi-matte
New Range
4 Variants
Hermoli detailed figures, unpainted, white 1:200
from 6,90 €
polystyrene, semi-matte
3 Variants
Polystyrene black, matte
from 3,20 €
impact-resistant, black
11 Variants
ASA H-beam strips, white
from 2,50 €
white, matte, given dimensions: height x width x wall thickness
3 Variants
Silhouette figures, white
from 2,20 €
material: polystyrene
5 Variants
Palaset P-09 document tray
from 12,50 €
closed on three sides, one side open and has a cut-out for gripping purposes, can be stacked vertically and offset, for DIN A4 documents, high quality injection moulded polystyrene, glossy, striation-free; given...
8 Variants
ASA square tube, white
from 2,30 €
white, matte, given dimensions: height x width x wall thickness
12 Variants
Textured sheet, through-stamped, large
from 12,80 €
material: polystyrene, Strength: 0.5 mm
4 Variants
Chairs, white, 1:50
from 0,90 €
polystyrene, injection moulding
8 Variants
Polystyrene round tube, white
from 2,10 €
white, matte, given dimensions: outer diameter x inner diameter
New Range
4 Variants
Hermoli detailed figures, unpainted, white, 1:100
from 6,90 €
polystyrene, semi-matte
Polystyrene vehicles, white, 1:100, car
from 8,60 €
injection moulding
11 Variants
ASA L-angle strips, equilateral, white
from 2,30 €
white, matte, given dimensions: height x width x wall thickness
5 Variants
Palaset plactic boxes, coloured, pen holder
from 5,30 €
high quality polystyrol injection mould, glossy, striation-free, without top, given dimensions: outer measurements l x w x h (inner measurements are generally about 10 mm smaller), wall thickness = 5.0 mm, designed...
3 Variants
Bicycles, polystyrene, white
from 0,80 €
injection moulding
4 Variants
Step boards 34°, polystyrene, white
from 1,30 €
injection moulding, rise is approx. 34°
Lomography Konstruktor DIY Kit for SLR camera
from 39,00 €
assembly kit for a 35 mm single-lens reflex camera (SLR); (changeable 50mm f/10 lens; shutter speed: 1/80s with multiple exposure function; focus: 0.5 m to infinity), flash adapter, black plastic (ABS), colourless POM...
Polystyrene vehicles, white, 1:200, car
from 0,60 €
injection moulding
view more articles
✖
Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies. More information
Welcome to Modulor
WITH or WITHOUT VAT?
As a business customer, see net prices - or as an individual customer, see all prices including sales tax.
