reverse side is mirrored, front side with protective film, all edges trimmed
Beech plywood F1
from 4,50 €
Thickness tolerance: ± 0.5 mm, Useable size: guaranteed minimum dimension
Graphic and cover board, coloured
from 1,70 €
solid colour, matte, smooth/smooth
Finnboard (wood pulp), beige
from 12,50 €
material: pure ground wood pulp
Grey cardboard, smooth/smooth
from 10,00 €
material: 100% recycled paper
from 3,90 €
material: real wood veneer with paper backing, Classic quality: maple Canadian (variegated grain), bamboo natural / caramel (straight grain), birch Finnish (redary veneer), oak European (vari ...
Serigraphy board, white
from 0,70 €
material: Finnish wood pulp, Lamination: covered on both sides with white paper
Microwood paper--backed veneer, double-sided
from 3,30 €
material: real wood veneer with paper backing, Bonding: glued to one another with an additional later of paper in between, Veneer thickness: approx. 0.1 mm, total thickness depending on the type of wood is 0.4 - 0.55 mm
Ecobra cutting mat, top quality translucent
from 8,90 €
material: inner layer made from hard PVC, top layer from soft PVC, Material layers: 3-layered, Material strength: 3 mm, Features: one side printed with grid design and cm graduation
Bristol board, bright white
from 0,70 €
material: chlorine-free bleached pulp (TCF)
from 1,80 €
smooth/smooth, fine sanded, Tc = lengthwise
Snap-off standard blades for 9 mm cutter, pointed
from 2,20 €
come in translucent plastic case
Ulmer steel cutting square with facing
from 25,00 €
steel, open-worked with a bar in the middle, painted grey, bevelled edge on a side piece, without graduation, knob for gripping, th = 2 mm
Steel ruler, rust-proof, flexible
from 2,20 €
Tolerance class: conforms to DIN ISO 2768 m/EC class II, design: reads from left to right, flexible construction, Strength: 0.5 mm, Dimensions: etched or engraved graduation, upper edge 1/1 mm, lower edge 1/2 mm
Ecobra metal cutter, for 9 mm blades, lock screw
from 5,40 €
silver aluminium handle with chromed steel clip, unrestricted feeder, positioning lock screw, blade in metal guide
Plexiglas GS coloured, 5 mm (custom cutting available)
from 2,60 €
Material: Plexiglas brand acrylic glass, Brand: Evonik, Surface: glossy/glossy, both sides with protective film
from 9,90 €
Product description: light coloured wooden handle, ergonomically shaped with brash bush, diameter: 1.9 mm tip
Polypropylene opaque, coloured, matte
from 1,95 €
matte/semi-gloss, corona treated
Ecobra cutter, metal, silver
from 6,90 €
Material: full metal housing, steel blade, Colour: silver, Attributes: metal cutter guide, notched slider, auto lock, Configuration: with hole for hanging, clip and breakoff device
Material: medium-density fiberboard (MDF), Surface: smooth/smooth (sanded on both sides), brown, Characteristic: V20 E1 (bonding, not waterproof)
Plexiglas Satinice SC, 1-side satiny, white (custom cutting available)
from 1,90 €
cast (GS), translucent, satiny/glossy, both sides with protective film, 49 % light transmission (reference value at 3 mm thickness)
Aluminium cutting ruler with incumbent steel edge
from 13,20 €
thin, anodized aluminium, incumbent steel edge for cutting and laying out templates, aluminium beveled face with imprinted mm graduation, anti-slip (rubberized) reverse side, comes in soft plastic case, th = 6 mm, w...
Styrocut 3 thermo cutter
from 749,00 €
Worktop: multiplex, covered with anodised, chequered aluminium, Worktop dimensions: 265 x 610 mm, Bracket: guide bar moves along the side on ball bearings, front and back adjustable buffers
material: anodised aluminium, Steel edge: steel edge for cutting or ink drawing/aluminium bevelled edge with imprinted mm graduation, equipment: with hanging hole and anti-slip reverse side (rubber)
Steel ruler, rust-proof, rigid
from 5,20 €
conforms to EC class II, reads from left to right, stiff construction (th = 1.0 – 1.4 mm), rust-free spring band steel, etched or engraved graduation: upper edge 1/1 mm und lower edge 1/2 mm, conversion table...
Proxxon Thermocut hot wire cutter
from 109,00 €
Housing material: plastic injection moulding, Worktop material: aluminium-cobond Alu/PE laminated panel, Dimensions: 280 mm x 390 mm, Transformer: secondary; max. 10 V at 1 A
Drafting and cutting ruler, acrylic
from 12,90 €
transparent, steel edge and bevelled edge, raised nubs, partial silicone strips, coloured grid and graduation, th = app. 3.0 mm
view more articles
This is Modulor
We Love Material
Whether for design, architecture, model making, DIY, artwork or stationery: over 30,000 articles that make the heart beat faster. For professionals. And aspiring professionals.
Inspiring & Unique
Abreast of all developments in the world of materials: At Modulor there are always new, first-class products waiting to be discovered. In all shapes and colours – and in many instances tailor-made.
A Tradition of Creative Expertise
Questions about materials? We provide personalized and competent advice. With over 25 years of experience our enthusiasm for materials continues unabated: +49 (0)30 690 360
PayPal, credit cards, direct debit – at Modulor paying is very simple. Pay after delivery? No problem: just select „Invoice“ as payment method.
We deliver with our logistics partner quickly and securely – upon inquiry, same day delivery is even available within the Berlin city limits.
Standard shipping is free within Germany for orders over €80.
A Berlin Original
All the products and even more ideas can be experienced in person at our Berlin-Kreuzberg store. Over two floors and more than 3,000 m².
Sign Up and Get 5€ Off Your Next Purchase
Exclusive vouchers and sale
All the news about Modulor
Welcome to Modulor
WITH or WITHOUT VAT?
As a business customer, see net prices - or as an individual customer, see all prices including sales tax.
Business customer Price with sales tax
Private customer with VAT
You can change your choice at the top of the page at any time in the future.