Saws

universal saw, for cuts with and against the grain without depth limitation, BT = 0.5 mm, BL = 265 mm, TL = 600 mm, TS crossways = 1.9 x 3.7 mm, TS lengthwise = 3.3 x 3.6 mm

l = 130 mm, hardened, given material suitability: wood (H), plastic (K)

with bore hole diameter of 10 mm

solid metal frame conforming to German norm DIN 6473, powder-coated, beechwwod handle, l = 510 mm (with handle), mounting pins cannot be lost, saw blade can twist up to 90 °, includes 1 bi-metal saw blade with 24...

made of 6 mm round steel, powder-coated, l = 240 mm (including handle), fitted with PUK 310 saw blade

fret saw (bow), red wooden handle, bow is tubular steel (painted black) with 13 mm diameter x 1 mm, spring-loaded chuck and rubber buffer, hardened wingnuts, working reach = 320 mm; included tools: hand (Persian)...

with bore hole ø 10 mm

HSS blade; precision wavy-set crosscut and hardened teeth; nonbreakable, flexible backing, cuts all materials, l = 300 mm, w = 12.5 mm, th = 0.63 mm

machine base of cast iron with rubber feet; very large, stable die-cast aluminium saw table of 360 x 280 mm (tilts up to 45° for mitre cuts); quiet induction motor with switchable speed control, 2 slender parallel...

plastic housing with the load-bearing parts made of die-cast aluminium, machined die-cast aluminium worktop, extension wing pulls out from the side to 510 mm, saw blade is adjustable for height (1 - 22 mm) and...

one-sided, fine toothing, mainly for cutting across the grain without depth limitation, BT = 0.5 mm, BL = 250 mm, TL = 580 mm, TS = 1.5 x 3.5 mm

fret saw V-board (wood, 170 x 65 mm, th = 10 mm, hole diameter is 17 mm); table clamp (steel, nickel-plated, 5 x 10 mm, 50 mm jaw opening)

NiCr 8020 hot cutting wire

beechwood handle, 13 mm diameter steel rod frame (painted black), spring-loaded chuck, hardened wingnuts

ABS plastic housing with a sliding side door allowing easy removal of sawdust; machined, die-cast aluminium table 160 x 160 mm, quiet high performance motor tested for prolonged use, saw blade shaft runs is equipped...

hardened steel, wavy-set sharp teeth, with mounting holes, l = 150 mm (distance between holes is 146 mm), w = 6 mm, th = 0.4 mm, given material suitability; wood (W), metal (M), plastic (P)

aluminium

frame made of 5.4 mm thick, nickel-plated rectangular bar steel, beechwood handle, l (max.) = 310 mm (including handle), fitted with a PUK 310 saw blade, comes in PE case

with pin end, l = 127 mm (round saw blade without pin end, l = 125 mm)

with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness

with bore hole diameter of 10 mm

fret saw V-board (wood, 170 x 65 mm, th = 10 mm, hole diameter is 17 mm); table clamp (steel, nickel-plated, 5 x 10 mm, 50 mm jaw opening)

reversible and ergonomic handle, high quality steel, 14 teeth/inch, double sharpened, teeth are ground, teeth tips are hardened

one-sided, fine toothing, mainly for cutting across the grain, BT = 0.3 mm, BL = 150 mm, TL = 370 mm, TS = 1.5 x 2.1 mm

aluminium

plywood board, brass, aluminium