0
Basket
My account
B2B
Store
      Categories
      Products
      searching for products ...
      There is no result for »askldhasd«.
      HomeMoulding

      Moulding

      Further info

      Material

      Color Group

      Brand

      Price

      187 article   /   721 Variants
      Page 1 of 6
      Sort by: Relevance
      • Relevance
      • Topseller
      • Price - lowest first
      • Price - highest first
      View
      • Acrylic glass XT round rod, colourless
        transparent, colourless, glossy
        40 Variants
        Acrylic glass XT round rod, colourless
        from 1,40 €
      • Mould making plasticine
        sulphur-free, for working in conjunction with interlinking silicone additives (non-inhibiting), comes in foil package
        2 Variants
        Mould making plasticine
        from 6,70 €
      • Sugru self-setting silicone rubber
        air curing, hand-formable rubber based on the silicone elastomer Formerol, self-adhering, after curing is permanently flexible (Shore A -hardness is 70 Sh), the colours can be mixed among themselves, odourless,...
        7 Variants
        Sugru self-setting silicone rubber
        from 8,50 €
      • Round rod, brass
        Material
        brass
        19 Variants
        Round rod, brass
        from 1,05 €
      • Polystyrene rigid foam, white, untrimmed
        fine pore model building board from extruded polystyrene rigid foam board, extremely pressure-resistant (high density), rough surfaces (not sheared), straight edges, approx. 33 kg/m³, certified to DIN EN 13501-1:...
        3 Variants
        Polystyrene rigid foam, white, untrimmed
        from 14,80 €
      • Styrofoam, light blue, untrimmed
        medium pore insulating board from extruded polystyrene rigid foam board, pressure-resistant, smooth, semi-gloss surfaces, straight edges, approx. 33 kg/m³, certified to EN 13501-1 norm, conforms to DIN 4102 building...
        9 Variants
        Styrofoam, light blue, untrimmed
        from 2,40 €
      • Modulor thermoplastic modelling pellets
        white granules, pearl-sized (about 3 mm), polyutethane elastome, melting point ca. 60 °C, specific weight 1,2 g/cm²; hazardous warning: none
        3 Variants
        Modulor thermoplastic modelling pellets
        from 3,60 €
      • Formcard meltable bio-plastic
        Material
        Thermoplastic bioplastic
        Dimensions
        card: 2,5 x 55 x 85 mm
        5 Variants
        Formcard meltable bio-plastic
        from 6,90 €
      • Protopaper
        matte finish on one side
        2 Variants
        Protopaper
        from 2,95 €
      • Polystyrene rigid foam, ivory, untrimmed
        medium pore insulating block made out of extruded polystyrene rigid foam; pressure-resistant, smooth, semi-gloss surface; straight edges, approx. 35 kg/m³, certified as conforming to EN 13501-1, conforms DIN 4102...
        9 Variants
        Polystyrene rigid foam, ivory, untrimmed
        from 3,35 €
      • Polystyrene rigid foam, silver-grey, untrimmed
        fine pored modelling panel made of extruded polystyrene rigid foam, very compression resistant (high density), glossy surfaces (untrimmed), straight edges, approx. 34 kg/m³, certified per DIN EN 13501-1; Euroclass...
        3 Variants
        Polystyrene rigid foam, silver-grey, untrimmed
        from 8,50 €
      • PUR G27 quick casting resin
        2 component quick casting resin, without fillers, hard (approx. 70 Sh.D), highly impact-resistant, very low viscosity (pours extremely well), a substantial amount of fillers can be added, odorless, cures to an opaque...
        4 Variants
        PUR G27 quick casting resin
        from 20,50 €
      • Worbla´s Finest Art modeling material sheet
        cellulose-polyester composite, light brown and opaque, th = 1 mm, ca. 1100 g/m², can be thermoplasically shaped any number of times, one side is coated with a thermoplastic adhesive (smooth, semi-matte surface)...
        5 Variants
        Worbla´s Finest Art modeling material sheet
        from 5,00 €
      • Acrystal Prima acrylic resin
        two component water-based acrylic resin system for casting, laminating and coating, for interior as well as protected exterior spaces, hard (81-83 Sh-D hardness), impact resistant, odourless, material is opaque white...
        4 Variants
        Acrystal Prima acrylic resin
        from 26,60 €
      • Keramiplast modelling clay
        air-dried, comes in air-tight PE foil
         
        Keramiplast modelling clay
        from 5,50 €
      • Acrylic glass XT round rod, fluorescent
        transparent, flourescent, glossy
        48 Variants
        Acrylic glass XT round rod, fluorescent
        from 2,60 €
      • Round rod, aluminium
        16 Variants
        Round rod, aluminium
        from 0,75 €
      • SikaBlock PUR modelling board M450
        extremely fine pored polyurethane-based light moulding material, orange, density: 450 kg/m³; compressive strength: 10 MPa (at 10% compression set, ISO 604), flexural strength: 12 MPa (ISO 178), modulus of...
        6 Variants
        SikaBlock PUR modelling board M450
        from 6,30 €
      • Standard plasticine, coloured
        „handicraft plasticine“, comes in foil package
        11 Variants
        Standard plasticine, coloured
        from 3,60 €
      • Artestone ceramic casting powder
        high quality casting powder, mixing ratio of powder to water is 4:1, working life: 8-10 minutes, curing time: approx. 30 min., expansion: 0.3%, surface hardness (cured): >300 N/mm², 1000 g powder result in 600 ml...
        2 Variants
        Artestone ceramic casting powder
        from 8,30 €
      • Alpa Sil EH 10:1
        addition-crosslinked precison silicone rubber mould material, medium soft (26 - 28 Sh-A), highly elastic, good mechanical stability, low viscosity (pours well), cures to an opaque light blue colour, mixing ratio of...
        4 Variants
        Alpa Sil EH 10:1
        from 10,50 €
      • Acrylic glass GS blocks, transparent, colourless
        glossy/glossy, both sides with protective film
        6 Variants
        Acrylic glass GS blocks, transparent, colourless
        from 6,50 €
      • Polystyrene foam Styropor EPS 040 DEO/WAB
        multi-purpose insulation panel made of expanded polystyrene rigid foam, compression resistant (compressive stress ≥ 100 kPa per DIN EN 826), smooth edges without rim, fine pearl texture, white, approx. 16...
        6 Variants
        Polystyrene foam Styropor EPS 040 DEO/WAB
        from 0,95 €
      • Dyes for synthetic resins
        highly pigmented, intense pigment pastes that can be mixed together for colouring polyurethane, polyester and epoxy resins, is either capable of flowing or a paste depending on the colour, density at room temperature...
        7 Variants
        Dyes for synthetic resins
        from 4,80 €
      • PUR G26 quick casting resin
        2 component quick casting resin, without fillers, hard (approx. 70 Sh.D), highly impact-resistant, very low viscosity (pours very well), a substantial amount of fillers can be added, cures to an opaque beige-brown...
        4 Variants
        PUR G26 quick casting resin
        from 21,50 €
      • Syringes and dosing dispensers
        for applying glue in the form of dots (especially Ruderer plastic glue)
        6 Variants
        Syringes and dosing dispensers
        from 0,20 €
      • SikaBlock PUR  M600 modeling board
        Material
        microcellular polyurethane-based modeling material
        Colour
        light brown
        Shore-hardness
        58 Sh-D, very hard (ISO 868)
        Density
        600 kg/m³ (ISO 845)
        6 Variants
        SikaBlock PUR M600 modeling board
        from 6,70 €
      • Modelling plaster
        white, comes in paper sack with foil insert
        3 Variants
        Modelling plaster
        from 2,00 €
      • Super Sculpey
        oven-curing modelling compound (15 min. at 130 °C), very pliable, very crack resistant
         
        Super Sculpey
        from 13,80 €
      • Pretex fabric stiffener
        air-drying, one-component water-based stiffener
        4 Variants
        Pretex fabric stiffener
        from 17,70 €
      • Mars Clay, standard, brown
        non-drying modelling clay made from wax, fillers and pigments, can be worked with from 15 C° to 25 °C, tear-proof, polishes up well, odorless, homogenized (no air bubbles), forms hard surface and stable edges,...
         
        Mars Clay, standard, brown
        from 22,30 €
      • Super Sculpey Living Doll
        oven-curing modelling compound (15 min. at 130 °C), very pliable, very crack resistant, miscible
        3 Variants
        Super Sculpey Living Doll
        from 14,80 €
      • PUR casting/moulding resin U1404
        2 component casting resin, without fillers, soft to medium hard (approx. 40 to 80 Sh.A), extremely elastic, very good mechanical stability, very low viscosity (pours well), material is reddish opaque when cured,...
        5 Variants
        PUR casting/moulding resin U1404
        from 27,80 €
      • Polyester casting resin GTS, crystal clear
        2 component casting resin from unsaturated ortophtal acid and polyester resin and MEKP hardener, preaccelerated, medium reactivity, styrene content is 35%, without fillers, hard, very low viscosity (pours well), when...
        2 Variants
        Polyester casting resin GTS, crystal clear
        from 19,90 €
      • TecClay, lightweight, light brown
        non-drying modelling clay made from binding agents (microwax among others), fillers (zinc stearate, magnesium and micro hollow globules among others) and dyes; can be worked with from 15 °C to 25 °C, absolutely...
         
        TecClay, lightweight, light brown
        from 15,10 €
      Page 1 of 6
      This is Modulor
      Modulor Newsletter
      Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information