Material: Irreversible hardening elastic impression material (powder), Color: blue, Mixing ratio: 2:1 (water:alginate – firm) or 3:1 (medium consistency), Mixing time at 23°C: 30–40 sec.
5 Variants
Syringes and dosing dispensers
from 0,20 €
for applying glue in the form of dots (especially Ruderer plastic glue)
7 Variants
Dyes for synthetic resins
from 5,30 €
Product description: highly pigmented, intense pigment pastes that can be mixed together, Use: for colouring polyurethane, polyester and epoxy resins, Storing: shelf-life when properly stored: 12 months
2 Variants
Wooden stirring spatula
from 0,95 €
l = 150 mm, w = 20 mm, for stirring resin preparations of up to about 500 g
2 Variants
Mixing cups, polyethylene
from 6,90 €
polyethylene single-use mixing cups (HDPE), translucent, colourless, opening diameter: 82 mm (250 ml), 106 mm (600 ml), inner walls and bottom are smooth
5 Variants
PUR casting/moulding resin U1404
from 29,90 €
material: 2 component casting resin, End state: material is reddish and transparent when cured, Working life: 25 to 100 minutes, Density: (at room temperature) approx. 1.05 g/cm³
4 Variants
TFC silicone rubber type 2-1 low-viscosity, set
from 24,90 €
Material: Silicone rubber, Shore hardness: A 35, Color: yellow, Mixing ratio: 1:1 by weight
Mould release agent, low viscosity, water soluble
from 4,90 €
dyed to a reddish colour, polyvinyl alcohol-based; resistant to numerous solvents, styrol and benzene; ready-to-use, apply with cloth or brush, flash-off time: 15-20 minutes
3 Variants
Latex Moulding Material
from 9,90 €
natural rubber-based air drying single component casting material (dispersion), pre-vulcanized with ammonia (0.3%), very soft (no Sh-A data available), extremely elastic, very low viscosity, cures to a translucent...
TFC silicone oil, low viscosity
from 9,50 €
Ingredients: polydimethylsiloxane, Color: transparent colorless, Viscosity at 25° C: low viscosity/thin-bodied, 50 mPa·s, Density at 25° C: 0.96 g/cm³
2 Variants
Latex paste
from 16,90 €
natural rubber based air drying single component casting material (dispersion), pre-vulcanized with ammonia, medium hard, very elastic, very high viscosity (can be brushed and troweled), cures to a opaque amber...
4 Variants
TFC silicone rubber type 15 translucent set
from 25,90 €
Material: Addition-curing 2 component silicone rubber, Shore hardness: A 32 , Color: colorless, Mixing ratio: 1:1 by weight
Air-cured mould making compound
from 5,90 €
Product description: very soft and exact mould making compound, Attributes: air-drying, Colour: skin colour (caucasian)
Gedeo latex
from 19,50 €
air-curing, one-component, natural rubber based moulding material, pasty consistency, extremely elastic, applied in 4 layers, drying time is 6 hours
Moulding set
from 31,40 €
Mould release wax, emulsion
from 4,90 €
flash-off time: 15 - 20 minutes, uses: 50 - 100 g per sq. metre, volume: 60 ml, color: colourless when dried
Weicon silicone spray
from 7,00 €
Contents: 400 ml, Colour: transparent
3 Variants
Disposable gloves, Latex
from 0,35 €
examination gloves, lightly powdered with corn starch, good quality
6 Variants
TFC silicone pigment
from 14,90 €
Material: Highly pigmented special dye for dyeing silicone rubber, Colors: black, white, blue, yellow, green, red, brown
Talcum powder
from 2,20 €
white
Funnel set
from 3,90 €
Material: plastic
4 Variants
TFC silicone rubber type 6 food safe, set
from 39,90 €
Material: Addition-curing 2 component silicone rubber, Shore hardness: A 22, Color: white (component A) and apricot (component B), Mixing ratio: 1:1 by weight
Material: Thixotropic agent for thickening addition-curing silicone, Color: translucent, Mixing ratio: 1% up to a maximum 3% of the weight of the silicone, Mixing time: 60 sec. (Silicone component with thixotropic agent) and 60 sec. (Mixing of the silicone components)
4 Variants
Gedeo modelling set
from 22,50 €
various set for casting and moulding projects
Release agent 818, paste-like
from 26,90 €
wax dispersion paste, silicone-free, halogen-free, colourless when dry, ready-to-use for application with a rag or a brush, air evaporation time is 5 - 10 minutes, polishes up well, consumes approx. 50 - 100 g per...
✖
Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies. More information
