Filling & Sanding

polyethylene single-use mixing cups (HDPE), translucent, colourless, opening diameter: 82 mm (250 ml), 106 mm (600 ml), inner walls and bottom are smooth

silicone carbide grit, solid resin bonding, water repelling latex backing paper, for manual wet sanding of metal (not stainless steel), plastic, varnish and putty

l = 150 mm, w = 20 mm, for stirring resin preparations of up to about 500 g

ready-to-use filler for interior use, drying time is 2-3 hours

aluminium oxide grit, hide glue bonding, backing paper 75 – 90 g/m², for manual or machine dry sanding of wood, varnish, putty, plastic

made from high quality cotton, very hard-wearing, thick-woven, especially soft, lint-free, washable to 40 °C

silicon carbide grit, hide glue bonding, backing paper 110 g/m², for manual or machine dry sanding of metal (not stainless steel), plastic, varnish and putty

wax-free, water soluble, with polishing solids especially suitable for plastics, used for polishing acrylics and polycarbonates

synthetic fibers with corundum (aluminum oxide abrasive) in brown, Bordeaux red or silicon carbide grey, resin bonded, for diverse sanding and cleaning work, can be used wet and dry for wood, metal and paint

aluminium oxide, resin bonded, for wet and dry sanding of wood, metal (not for stainless steel), paint and filler

ready-to-use filler for interior use, pure acrylate dispersion with fillers, white, solvent-free

examination gloves, lightly powdered with corn starch, good quality

universal polishing agent with good sanding and polishing abilities

sturdy fibreglass-reinforced polyamide housing with comfort sections in the grip area and a 20 mm collar that fits to the Micromot system components, spindle runs in precision ball bearing and is fitted with a lock...

white, mixing ratio of powder to water is 2:1, working life: 35-40 minutes, setting time: approx. 60 minutes, surface hardness (cured): >190 N/mm², temperature resistance (cured): short term up to 170 °C.

course, 200 g package

cellulose reinforced gypsum filler for interiors, for filling holes in plaster and masonry, for caulking gypsum plaster board as well as for moulding and modelling, workable for about 60 minutes

made from normal corundum, various grits, shapes and sizes (see picture), with tool carrier shaft ø 3.0 mm (except Proxxon No. 28983, 28981, 28989)

thixotropic 2 component filler, polyester resin with BPO hardener (colourless), amine accelerator, density: approx. 1.8 g/cm³, very low pore volume, sands and polishes extremely well, cures to a cream white colour,...

polyurethane foam material, conical shaped, smooth, dirt repellent surface, sound insulation 37 dB (SNR), comes in PE bag

with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness

thixotropic 2 component filler, polyester resin with BPO hardener, amine accelerator; density: approx. 1.85 g/cm³, fills extremely well, sands and polishes extremely well, hardens to a grey colour, mixing ratio of...

for sanding fleece or sand paper with hook and loop backing; plastic, white, with handle, sanding surface 85 x 135

high quality interior and exterior filler that accepts paint well, synthetic resin with fillers and additives, white, contains solvent

2 component filler paste, polyester resin with BPO hardener (colourless), amine accelerator; density: approx. 0.7 g/cm³, machines down well, cures to an antique white colour, mixing ratio of resin to hardener is...

for lapping oil into wood surfaces, raw

with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness

for the handpad holder, with special fused alumina, type WSW 1241, for dry sanding of paint, filler and wood