Transparency: opaque, Material: Inner layers of rigid PVC, top layers of soft PVC, Material layers: 5-ply, Material thickness: 3 mm
4 Variants
Ecobra cutting mat, top quality translucent
from 8,90 €
material: inner layer made from hard PVC, top layer from soft PVC, Material layers: 3-layered, Material strength: 3 mm, Features: one side printed with grid design and cm graduation
Product description: light coloured wooden handle, ergonomically shaped with brash bush, diameter: 1.9 mm tip
Aluminium cutting ruler with incumbent steel edge
from 13,20 €
thin, anodized aluminium, incumbent steel edge for cutting and laying out templates, aluminium beveled face with imprinted mm graduation, anti-slip (rubberized) reverse side, comes in soft plastic case, th = 6 mm, w...
Ecobra cutter, metal, silver
from 6,90 €
Material: full metal housing, steel blade, Colour: silver, Attributes: metal cutter guide, notched slider, auto lock, Configuration: with hole for hanging, clip and breakoff device
Ecobra metal cutter, for 9 mm blades, lock screw
from 5,40 €
silver aluminium handle with chromed steel clip, unrestricted feeder, positioning lock screw, blade in metal guide
6 Variants
Ulmer steel cutting square with facing
from 25,00 €
steel, open-worked with a bar in the middle, painted grey, bevelled edge on a side piece, without graduation, knob for gripping, th = 2 mm
Styrocut 3 thermo cutter
from 749,00 €
Worktop: multiplex, covered with anodised, chequered aluminium, Worktop dimensions: 265 x 610 mm, Bracket: guide bar moves along the side on ball bearings, front and back adjustable buffers
4 Variants
Steel ruler, rust-proof, flexible
from 2,20 €
Tolerance class: conforms to DIN ISO 2768 m/EC class II, design: reads from left to right, flexible construction, Strength: 0.5 mm, Dimensions: etched or engraved graduation, upper edge 1/1 mm, lower edge 1/2 mm
Proxxon Thermocut hot wire cutter
from 109,00 €
Housing material: plastic injection moulding, Worktop material: aluminium-cobond Alu/PE laminated panel, Dimensions: 280 mm x 390 mm, Transformer: secondary; max. 10 V at 1 A
Styrocut thermal cutter, replacement wire
from 18,90 €
2 Variants
Aluminium cutting ruler with steel edge, thin
from 21,30 €
material: anodised aluminium, Steel edge: steel edge for cutting or ink drawing/aluminium bevelled edge with imprinted mm graduation, equipment: with hanging hole and anti-slip reverse side (rubber)
3 Variants
Exchange part for Proxxon circular table saw FET
from 7,80 €
4 Variants
Steel ruler, rust-proof, rigid
from 5,20 €
conforms to EC class II, reads from left to right, stiff construction (th = 1.0 – 1.4 mm), rust-free spring band steel, etched or engraved graduation: upper edge 1/1 mm und lower edge 1/2 mm, conversion table...
Snap-off standard blades for 18 mm cutter
from 2,20 €
Packing: in translucent plastic case
3 Variants
Pressure roller, standard
from 17,90 €
5 mm thick hard-wearing, pressure elastic plastic covering, waterproof and limited oil-resistance, aluminium core with plastic hubs, sturdy flat steel support frame, nickel-plated, beech handle with transparent...
Up to-0%
Wooden modelling sticks, set No. 1
from 11,90 €
Product: birch modelling sticks, Material: birch, sanded and polished, Length: 150 mm
4 Variants
Drafting and cutting ruler, acrylic
from 12,90 €
transparent, steel edge and bevelled edge, raised nubs, partial silicone strips, coloured grid and graduation, th = app. 3.0 mm
Olfa Excel Black snap-off blades for 18 mm cutter
from 7,90 €
come in black plastic case, made with tool steel (highest quality)
Olfa SVR-2 utility knife, 9 mm blades
from 9,90 €
Body: stainless steel handle and clip, Stepped feed: with Auto-Stop, Package contents: cutter with blade, 2 replacement blades, Packaging: blister pack
12 Variants
Round punch
from 3,90 €
Material: Steel C 45, Cutting hardness: HV 480 bis 558 kp/mm2 (HRC 47-52), Surface: milled finish; shank machined, lacquered, Standard: DIN 7200 Form B
Cutter for 18 mm blades with screw-lock
from 4,20 €
plastic handle with cushioned grip, notched feeder, positioning lock screw, blade in metal guide, snap-off aid
K1 artist knife
from 5,40 €
Contains: Handle and 5 K1 blades, Material: Aluminium, Handle: Round aluminium handle; knurled grip zone, Length handle: 115 mm
NT A 300 RP utility knife for 9 mm blades with auto lock
from 5,90 €
Material: Plastic housing; metal guide bar, Dimensions: 147 mm x 18 mm x 11 mm, Weight: 23 g, Color: Beige
NT C 1500 P circle cutter
from 29,90 €
white plastic with metal workings, includes protective cap for the blade and a guide line template
Ecobra metal cutter, for 9 mm blades, auto-stop
from 4,40 €
Material: full metal housing, steel blade, Colour: silver, Attributes: metal cutter guide, notched slider, auto lock, Configuration: with hole for hanging, clip and breakoff device
Snap-off standard blades for 9 mm cutter
from 1,20 €
come in translucent plastic case
Art knife cutter set
from 9,90 €
round aluminium handle with knurled grip zone, 6 different blades
Olfa snap-off blades for 18 mm cutter
from 5,90 €
come in yellow plastic case, made from tool steel (highest quality)
2 Variants
Cotton gloves white, light quality
from 1,20 €
100% cotton, washable up to 95° C
Art knife K1 (Xacto)
from 3,90 €
round aluminium handle, knurled grip zone, includes protective cap
cast steel handle painted silver-grey, notched feeder, blade can be located in position by means of a set wheel
view more articles
✖
Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information
Welcome to Modulor
WITH or WITHOUT VAT?
As a business customer, see net prices - or as an individual customer, see all prices including sales tax.