Model Adhesives

Ruderer L530 bzw. Technicoll 8008, toluol-free, transparent, colourless

contains solvent, transparent, yellowish, waterproof, aging-resistant, rubs off of the skin

ethyl cyanoacrylate adhesive, sets colourlessly, begins adhering after 5 - 60 seconds

ethyl cyanoacrylate adhesive, sets colourlessly, begins adhering after 2 - 60 seconds

transparent, colourless, for precise and fine gluing with a hollow needle

ethyl cyanoacrylate adhesive, sets colourlessly, begins adhering after 5 - 120 seconds

contains solvent, transparent, colourless, waterproof, fast drying, with separate fine injector

water-based wood glue (white glue), solvent-free, at 20 °C leave open maximum 15 minutes, translucent when set, short term water resistant (D2), uses approx. 150 g/m², application pressure must be at least 15...

cyanacrylate glue, thin fluid, colourless when dry, plastic storage box with safety fastener

inductor (catalyst) for all commercial super glues, colourless

for permanent joints; adhesive based on synthetic elastomers (rubber), cream coloured, limited use on polystyrene foam possible, open time (working time) is 30 minutes maximum

for durable and permanent joints; adhesive based on synthetic elastomers (rubber), adjustable spray pattern, cream coloured, NOT suitable for polystyrene foam, open time (working time) 45 minutes maximum

two component methacrylate-based reaction adhesive, high strength adhesion, residual elasticity, utilized with the "no mix process" (no mixing!), transparent, colourless, temperature resistant from -40 °C to +130...

alkoxy cyanoacrylate adhesive, low viscosity, weak smelling, sets colourlessly, begins adhering after approx. 10 - 150 seconds

cyanoacrylate adhesive pretreatment for "unglueable" or difficult to glue plastics such as PP and PE

light filler, glass-hard, white