Scope: for working in conjunction with interlinking silicone additives (non-inhibiting)
4 Variants
PUR G26 fast cast resin
from 22,90 €
Material: 2 component quick casting resin, End state: cures to an opaque beige-brown colour, Density: (at room temperature) approx. 1.1 g/cm³
Modulor thermoplastic modelling granules
from 445,00 €
Material: granules, polyurethane elastomer, Colour: white, Grain size: approx. 3 mm, Attributes: melting point ca. 60 °C
2 Variants
Creastone concrete casting compound
from 6,90 €
Mixing ratio: 10:1, 100 gram powder : makes 50 ml casting compound, Curing time: 2-3 days, Can be painted: 1-2 days after demoulding
4 Variants
Acrystal Prima acrylic resin
from 23,90 €
material: two component water-based acrylic resin system, Range of application: for casting, laminating and coating, for interior as well as protected exterior spaces
7 Variants
Dyes for synthetic resins
from 5,30 €
Product description: highly pigmented, intense pigment pastes that can be mixed together, Use: for colouring polyurethane, polyester and epoxy resins, Storing: shelf-life when properly stored: 12 months
2 Variants
Polyester casting resin GTS, crystal clear
from 19,90 €
Contents: 2 component casting resin from unsaturated ortophtal acid and polyester resin and MEKP hardener, includes a mixing bowl for sma ..., End state: when cured is transparent and colourless, density (at room temperature) approx. 1.2 g/cm³
4 Variants
PUR G27 fast cast resin
from 22,90 €
Material: 2 component quick casting resin, End state: cures to an opaque beige colour, density (at room temperature) approx. 1.1 g/cm³, Working life: approx. 2 minutes (for 200 g)
Mars Clay, standard, brown
from 24,90 €
material: non-drying modelling clay made from wax, fillers and pigments, Handling: can be worked with from 15 C° to 25 °C, Pre-heating temperature: 55 °C to 60 °C
Keramiplast modelling clay
from 5,90 €
air-dried, comes in air-tight PE foil
4 Variants
Sugru self-setting silicone rubber
from 8,50 €
material: air curing, silicone elastomer-based Formerol modelling clay
Epoxy casting resin, water clear, set
from 43,90 €
cold-curing, two-component casting resin consisting of bisphenol A-epichlorohydrin and epoxy hardener with polyoxyalkyleneamine, unfilled, hard, very low viscosity (very pourable), cured material is colourless and...
cellulose-polyester composite, light brown and opaque, th = 1 mm, ca. 1100 g/m², can be thermoplasically shaped any number of times, one side is coated with a thermoplastic adhesive (smooth, semi-matte surface)...
Up to-40%
TFC alginate impression compound, fast
from 8,94 €
Material: Irreversible hardening elastic impression material (powder), Color: blue, Mixing ratio: 2:1 (water:alginate – firm) or 3:1 (medium consistency), Mixing time at 23°C: 30–40 sec.
Super Sculpey
from 13,90 €
oven-curing modelling compound (15 min. at 130 °C), very pliable, very crack resistant
Super Sculpey Firm
from 16,90 €
product: oven-curing modelling compound (15 min. at 130 °C)
Fine-work tools set No. 2
from 23,70 €
steel, chromed or nickel-plated, wooden handle, l = 140 - 165 mm
2 Variants
Varaform heavy
from 16,20 €
cotton mesh material with permeable coating, square mesh (app. 4.0 x 4.0), spacing between holes app. 2.5, 18% cotton, 82% thermoplastic synthetic resin, heating time: 1 to 2 minutes, working life: 2 to 3 minutes,...
2 Variants
Pretex fabric stiffener
from 22,90 €
air-drying, one-component water-based stiffener
5 Variants
Formcard meltable bio-plastic
from 6,90 €
Material: thermoplastic bioplastic, Dimensions: card size: 2.5 x 55 x 85 mm
2 Variants
Biothan/Biodur 1785/330 casting resin, hard
from 26,90 €
Material: two-component polyurethane casting resin, Colour: colourless transparent when cured , Shore hardness: soft (ca. Sh-A 40 - 70), Mixing ratio: resin to hardener ca. 1.5-2.5 to 1
TecClay, lightweight, light brown
from 17,90 €
product: non-drying modelling clay, material: with binding agents (microwax among others), fillers (zinc stearate, magnesium and micro hollow globules among others) and dyes
cotton mesh material with permeable coating, rectangular mesh (app. 4.0 x 7.0), spacing between holes app. 2.0, 18% cotton, 82% thermoplastic synthetic resin, heating time: 1 to 2 minutes, working life: 2 to 3...
Papier-mâché modelling pulp
from 2,40 €
cellulose pulp, air-dried, comes in plastic bag
3 Variants
Latex Moulding Material
from 9,90 €
natural rubber-based air drying single component casting material (dispersion), pre-vulcanized with ammonia (0.3%), very soft (no Sh-A data available), extremely elastic, very low viscosity, cures to a translucent...
3 Variants
Super Sculpey Living Doll
from 14,80 €
product: oven-curing modelling compound (15 min. at 130 °C)
3 Variants
Modelling plaster
from 2,20 €
white, comes in paper sack with foil insert
New Range
3 Variants
Plaster bandages
from 4,90 €
white
4 Variants
TFC silicone rubber type 2-1 low-viscosity, set
from 24,90 €
Material: Silicone rubber, Shore hardness: A 35, Color: yellow, Mixing ratio: 1:1 by weight
Wooden modelling sticks, set No. 1
from 11,90 €
Product : birch modelling sticks, Material: birch, sanded and polished, Length: 150 mm
iFixit Metal Spudger Set
from 11,90 €
Material: chromed stainless steel, Length: 155 - 185 mm
5 Variants
Worbla's Transpa Art modelling sheets
from 5,00 €
Product description: thermoplastic polyester, Colour: colourless, transparent, Thickness: ca. 0,8 mm, Density: ca. 1000 g/m²
InDeClay, lightweight, light grey
from 21,90 €
material: non-drying modelling clay made from binding agents (microwax among others), fillers (zinc stearate, magnesium and micro hollow ...
view more articles
✖
Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies. More information
Welcome to Modulor
WITH or WITHOUT VAT?
At Modulor you can shop as a business customer (without VAT) or as a private customer (with VAT).
