Material: steel, perforated plate, Surface: powder coated (except for chrome-plated), Dimensions: 95 x 50 x 950 mm or 95 x 50 x 1320 mm (width x height x length)
Modulor Y table frame system
from 20,00 €
Table legs, QS 10°, rectangular: 2 x 30 x 30 mm, height without table top from 710 mm, adjustable base diameter 40 mm, Table legs, QL 10°, rectangular: 2 x 30 x 30 mm, height without table top 970 mm, adjustable base diameter 40 mm
Alu Magnus H interchangeable picture frame
from 6,30 €
Material: Aluminum, Profile Width: 8 mm, Profile Height: 20 mm, Profile Surface: flat profile
Table frame system Modulor M
from 30,00 €
Material: steel, wall thickness 2mm, Table legs: cross section 30 x 30 mm, length: 430 mm, 730 mm, 930 mm, table legs with floor levelling screws ( thread length 20 mm ) made o ...
Table frame E2, crossbars
from 85,00 €
material: Steel pipe, round, ø 21.3 mm (1/2"), wall thickness 1.75 mm, steel 1.5 mm, dimensions: Length = Frame width, Surface: powder-coated (except chrome-plated)
Table frame E2, side frame
from 160,00 €
material: Steel tube, round, ø 21.3 mm (1/2"), wall thickness 1.75 mm, dimensions: height x depth, Surface: powder-coated (except chrome-plated), Design E2: Adam Wieland 1965 - derived from the original design by Egon Eiermann from 1953
Brass round rod
from 1,60 €
Aluminium sheets (custom cutting available)
from 2,80 €
medium hard, smooth, one side with protective film
Kidz table frame E2
from 280,00 €
material: Steel tube, round, ø 21.3 mm (1/2"), wall thickness 1.75 mm, Surface: powder-coated, white (RAL 9016), set content: 2 side parts for offset cross h = 520 mm, t = 600 mm, 2 cross struts l = 1000 mm, 4 height adjusters l=228mm, accessories
Round magnets, neodymium, silver
from 2,95 €
material: neodymium iron boron (NdFeB), magnetisation direction: through the height (axial), max. operating temperature: 80 °C
Round tube, brass
from 2,20 €
given dimensions: outer diameter x wall thickness
Brass sheets (custom cutting available)
from 3,00 €
Surface: one side with protective film (starting at thicknesses of 0.3 mm), Characteristic: medium hard, Material designation EN: CW508L, Old DIN standard: DIN 2.0321
Copper sheets (custom cutting available)
from 4,00 €
Characteristic: medium hard, Surface: smooth, one side with protective film (starting at thicknesses of 0.5 mm)
Aluminium round tube
from 3,00 €
Dimensions: given dimensions: ø exterior x wall thickness
Alloy: Al 99,5, Specification: RSp = round-holed, staggered pitch, Hole length/separation: Example: RSp 1,5/2,5 is a round-holed sheet with a hole length of 1,5 mm and a separation of 2,5 mm. The space between the hole ...
Steel grade: St 1203, Coating: sendzimir galvanised, Specification: RSp = round-holed, staggered pitch, Hole length/separation: Example: RSp 2,0/3,5 is a round-holed sheet with a hole length of 2,0 mm and a separation of 3,5 mm. The space between the hole ...
Wire mesh, steel, spot-welded
from 2,60 €
square mesh grating, steel wire, galvanised after weaving
Aluminium cutting ruler with incumbent steel edge
from 13,90 €
thin, anodized aluminium, incumbent steel edge for cutting and laying out templates, aluminium beveled face with imprinted mm graduation, anti-slip (rubberized) reverse side, comes in soft plastic case, th = 6 mm, w...
Wire mesh, steel, flexible
from 2,60 €
square mesh grating, galvanised steel wire
Anita B interchangeable picture frame, aluminium
from 10,40 €
Profile width: 9.6 mm (polished gold), 9 mm (bright, polished copper, matt taupe, and matt gold), Profile height: 21.5 mm (bright, polished copper), 19 mm (polished gold), 14 mm (matt taupe, and matt gold)
Brass flat bar
from 5,20 €
Foldback clips, black
from 0,20 €
removable nickel-plated clamps
Modulor M table frame system for children
from 265,00 €
Table frame material: steel, legs 30 x 30 mm, rails 25 x 40 mm, wall thickness 2mm, Table frame dimensions: h x w x l = 500-740 mm, 680 (610) x 1200 (1130) mm
Table top supporter for E2 table frame
from 90,00 €
material: square steel tube, 30 x 30 mm, wall thickness is 2 mm, has round hole on both ends, ends are cut at an angle, each end with a d ..., Given dimension: upper side length (length of bottom side = 1388 mm)
Expanded metal, aluminium, ultra-fine
from 3,10 €
Al 99.5; degreased
Micro-corrugated sheet, through-stamped, fine
from 2,40 €
Textural configuration: s = 1.5 mm, h = 0.5 mm
Expanded metal, aluminium, fine
from 3,50 €
Al 99.5; degreased
Steel tinplate, tinned
from 2,20 €
tin-plated in silver, smooth
Square rod, brass
from 4,10 €
Aluminium fine perforted plate, round hole
from 5,90 €
Alloy: Al 99,5, Use: for model making and all kinds of design ideas without using machinery, Specification: RSp = round-holed, staggered pitch, Hole length/separation: Example: RSp 1,1/2,0 is a round-holed sheet with a hole length of 1,1 mm and a separation of 2,0 mm. The space between the hole ...
view more articles
Sign Up and Get 5€ Off Your Next Purchase
Exclusive vouchers and sale
All the news about Modulor
This is Modulor
We Love Material
Whether for design, architecture, model making, DIY, artwork or stationery: over 30,000 articles that make the heart beat faster. For professionals. And aspiring professionals.
Inspiring & Unique
Abreast of all developments in the world of materials: At Modulor there are always new, first-class products waiting to be discovered. In all shapes and colours – and in many instances tailor-made.
A Tradition of Creative Expertise
Questions about materials? We provide personalized and competent advice. With over 25 years of experience our enthusiasm for materials continues unabated: +49 (0)30 690 360
PayPal, credit cards, direct debit – at Modulor paying is very simple. Pay after delivery? No problem: just select „Invoice“ as payment method.
We deliver with our logistics partner quickly and securely – upon inquiry, same day delivery is even available within the Berlin city limits.
Standard shipping is free within Germany for orders over €39.
A Berlin Original
All the products and even more ideas can be experienced in person at our Berlin-Kreuzberg store. Over two floors and more than 3,000 m².
Welcome to Modulor
WITH or WITHOUT VAT?
As a business customer, see net prices - or as an individual customer, see all prices including sales tax.
Business customer Price with sales tax
Private customer with VAT
You can change your choice at the top of the page at any time in the future.