Acrylic glass GS coloured, 3 mm (custom cutting available)
from 1,90 €
Material: Plexiglas brand acrylic glass, Brand: Evonik, Surface: glossy/glossy, both sides with protective film
8 Variants
Ecobra cutting mat, top quality
from 5,90 €
material: inner layer made from hard PVC, top layer from soft PVC, Material layers: 3-layered (transparent) or 5-layered (green/black), Material strength: 3 mm, Features: Both sides (green/black) or one side (translucent) printed with grid design and cm graduation
transparent, glossy, given dimensions: outer diameter x inner diameter
6 Variants
Laminated paper tube, round, brown
from 8,30 €
Cover: outer testliner or Kraft liner brown, Characteristics: spirally wound, Dimensions: inner diameter x wall thickness
Up to-50%
54 Variants
Decoflex veneer
from 3,90 €
material: real wood veneer with paper backing, Classic quality: architectural grade: anigre, bubinga, ash, Oregon pine, padauk, red elm, teak, wengé and zebrano; commercial-grade: gabonese wo ...
25 Variants
Plexiglas GS white (milky) (custom cutting available)
from 1,80 €
material: Acrylic Plexiglas GS, poured
6 Variants
MDF, thin
from 2,20 €
material: medium density fibreboard, Strength tolerance: ± 0.2 mm
26 Variants
Forex Classic rigid-PVC foam board, white (custom cutting available)
from 1,20 €
semi-gloss/semi-gloss, one side with protective film, flame resistant in compliance with DIN 4102 B1 (German Industry Norm)
glossy/glossy, both sides with protective film, coloured faces, luminous edges
26 Variants
Polystyrene white, matte
from 1,45 €
Characteristics: impact-resistant, Dimensions: usable dimensions=guaranteed minimum, Surface: One side: matte. Other side: shiny.
20 Variants
Styrofoam light blue, trimmed
from 1,50 €
Plate core: fine pore insulation panel made from extruded polystyrene foam, Surface: smooth (sheared), Characteristics: extremely pressure-resistant (high density), certified per EN 13501-1, conforms to DIN 4102: building material class B1 (flame ...
opaque, semi-gloss/semi-gloss, one side with protective film, flame resistant in compliance with DIN 4102 B1 (German Industry Norm)
Raw steel, cross-shaped holes (custom cutting available)
from 51,50 €
St 1203, raw
39 Variants
Etched brass deciduous trees
from 2,00 €
etched brass framework, dipped and flocked, given measurement is approximate height of the tree
44 Variants
Rosco colour filter film, E-Colour sheet
from 3,50 €
Base: polyester
2 Variants
Dichloromethane (methylene chloride)
from 7,50 €
Intended use: organic solvent, adhesive for polystyrene, acrylic glass (XT and GS), polycarbonate, ABS and PET-G, Molecular weight: 84.93 g, Melting point: -97° C
6 Variants
Polystyrene rigid foam, white, untrimmed
from 4,90 €
Plate core: fire pore model building board from extruded polystyrene foam, Surface: rough (not sheared), Characteristics: extremely pressure-resistant (high density), certified per EN 13501-1: Euroclass E, conforms to DIN 4102-1: building material c ...
17 Variants
Kapa line cardboard laminated, white
from 3,90 €
light-coloured PUR rigid foam core covered on both sides with matte, white pigmented chromo board
9 Variants
Polystyrene rigid foam, ivory, untrimmed
from 3,35 €
Plate core: medium pore insulating block made out of extruded polystyrene foam, Surface: smooth, semi-gloss surface, Characteristics: compression resistant, certified per EN 13501-1, conforms to DIN 4102: construction material class B1 (flame resistant)
Elongation at break: approx. 300%, Additional characteristics: without liner, hypoallergenic, electrically insulating, weather-proof, UV resistant, talc-powdered
13 Variants
Precision acrylic glass, transparent, colourless
from 5,20 €
Thickness tolerance: ± 0.1 mm for sheets up to th=1.0 mm, ± 0.2 mm for sheets from th=1.5 mm
9 Variants
Brass sheets (custom cutting available)
from 3,00 €
Surface: one side with protective film (starting at thicknesses of 0.3 mm), Characteristic: medium hard
7 Variants
Polypropylene translucent, colourless, matte
from 1,00 €
matte/semi-gloss, corona treated
30 Variants
Polyurethane filter foam ("plant foam")
from 3,20 €
Density: approx. 30 kg/m³
18 Variants
PET-G transparent, colourless
from 1,80 €
glossy/glossy, both sides with protective film, flame resistant in compliance with DIN 4102 B1 (German Industry Norm)
New
Creartec Creaform casting alginate powder
from 89,90 €
Material: powdery algae-based casting material with silane chips (glass fiber) as filler, Consistency after curing: elastic, dimensionally and geometrically stable
glossy/glossy, cast, thickness tolerance of ± 0.1 mm, both sides with protective film, all edges trimmed
48 Variants
Oracal 631 coloured adhesive film, opaque, matte
from 5,00 €
PVC, th = 0.08 mm, removable acrylic adhesive (adhesive strength 7N/25 mm after 24 hours), temperature resistant –40 °C to +80 °C, paper release liner is 137 g/m², inner diameter of roll core is 76...
view more articles
✖
Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies. More information
Welcome to Modulor
WITH or WITHOUT VAT?
At Modulor you can shop as a business customer (without VAT) or as a private customer (with VAT).
