material: inner layer made from hard PVC, top layer from soft PVC, Material strength: 3 mm, Features: Both sides printed with grid design and cm graduation
Ecobra cutting mat, top quality translucent
from 8,90 €
material: inner layer made from hard PVC, top layer from soft PVC, Material layers: 3-layered, Material strength: 3 mm, Features: one side printed with grid design and cm graduation
Snap-off standard blades for 9 mm cutter, pointed
from 2,20 €
come in translucent plastic case
Steel ruler, rust-proof, flexible
from 2,20 €
Tolerance class: conforms to DIN ISO 2768 m/EC class II, design: reads from left to right, flexible construction, Strength: 0.5 mm, Dimensions: etched or engraved graduation, upper edge 1/1 mm, lower edge 1/2 mm
Styrocut thermal cutter, replacement wire
from 18,90 €
Snap-off standard blades for 18 mm cutter
from 2,20 €
Packing: in translucent plastic case
from 0,80 €
Product description: light coloured wooden handle, ergonomically shaped with brash bush, diameter: 1.9 mm tip
Ecobra metal cutter, for 9 mm blades, lock screw
from 5,40 €
silver aluminium handle with chromed steel clip, unrestricted feeder, positioning lock screw, blade in metal guide
Styrocut 3 thermo cutter
from 749,00 €
Worktop: multiplex, covered with anodised, chequered aluminium, Worktop dimensions: 265 x 610 mm, Bracket: guide bar moves along the side on ball bearings, front and back adjustable buffers
Styrocut 2 thermo cutter
from 689,00 €
material: Multiplex worktop, covered with anodised, chequered aluminium plate, Length x width: 265 x 410 mm, Functions: guide bar moves along ball bearings, lockable front and back with 2 adjustable buffers
Material: full metal housing, steel blade, Colour: silver, Attributes: metal cutter guide, notched slider, auto lock, Configuration: with hole for hanging, clip and breakoff device
Abig linocut tools
from 0,90 €
pear-shaped beechwood handle with continuous borehole and ejector for easy and fast changing of cutting tools, five different blades made of 0.6 mm tempered steel and conical shafts (veining tool, U-shaped...
Wooden stirring spatula
from 0,95 €
l = 150 mm, w = 20 mm, for stirring resin preparations of up to about 500 g
Aluminium cutting ruler with steel edge, thin
from 21,30 €
material: anodised aluminium, Steel edge: steel edge for cutting or ink drawing/aluminium bevelled edge with imprinted mm graduation, equipment: with hanging hole and anti-slip reverse side (rubber)
Drafting and cutting ruler, acrylic
from 12,90 €
transparent, steel edge and bevelled edge, raised nubs, partial silicone strips, coloured grid and graduation, th = app. 3.0 mm
Steel ruler, rust-proof, rigid
from 5,20 €
conforms to EC class II, reads from left to right, stiff construction (th = 1.0 – 1.4 mm), rust-free spring band steel, etched or engraved graduation: upper edge 1/1 mm und lower edge 1/2 mm, conversion table...
Blades for art knife K1
from 3,90 €
Characteristic: Blades in plastic case, Material: Tempered steel, Length cutting edge: 37 mm, Blade length: 20 mm
Olfa Cutter NOL-1 for 18 mm blades
from 10,90 €
yellow soft-grip plastic handle (anti-slip), notched feeder, positioning lock screw, blade in metal guide
Mixing cups, polyethylene
from 6,90 €
polyethylene single-use mixing cups (HDPE), translucent, colourless, opening diameter: 82 mm (250 ml), 106 mm (600 ml), inner walls and bottom are smooth
Proxxon Thermocut hot wire cutter
from 109,00 €
Housing material: plastic injection moulding, Worktop material: aluminium-cobond Alu/PE laminated panel, Dimensions: 280 mm x 390 mm, Transformer: secondary; max. 10 V at 1 A
NT A 300 RP utility knife for 9 mm blades with auto lock
from 5,90 €
Material: Plastic housing; metal guide bar, Dimensions: 147 mm x 18 mm x 11 mm, Weight: 23 g, Color: Beige
Wet silicon carbide sandpaper, anthracite
from 1,00 €
silicone carbide grit, solid resin bonding, water repelling latex backing paper, for manual wet sanding of metal (not stainless steel), plastic, varnish and putty
Aluminium cutting ruler with incumbent steel edge
from 13,20 €
thin, anodized aluminium, incumbent steel edge for cutting and laying out templates, aluminium beveled face with imprinted mm graduation, anti-slip (rubberized) reverse side, comes in soft plastic case, th = 6 mm, w...
Replacement parts for Dahle paper trimmer 507/508
from 3,20 €
Olfa cutter No. 300 for 9 mm blades
from 7,90 €
yellow plastic handle, notched feeder, positioning lock screw, blade in metal guide
iFixit Metal Spudger Set
from 11,90 €
Material: chromed stainless steel, Length: 155 - 185 mm
Ulmer steel cutting square with facing
from 25,00 €
steel, open-worked with a bar in the middle, painted grey, bevelled edge on a side piece, without graduation, knob for gripping, th = 2 mm
Ecobra Compass circle cutter C-101
from 9,90 €
red and black plastic, printed scale for radius and diameter, blade holder, includes protective cap for blade and needle and a slip-proof disc used for avoiding punctures in the middle of a disc cut-out, for circles...
Japanese handsaw Ryoba SM265W Bakuma
from 50,10 €
universal saw, for cuts with and against the grain without depth limitation, BT = 0.5 mm, BL = 265 mm, TL = 600 mm, TS crossways = 1.9 x 3.7 mm, TS lengthwise = 3.3 x 3.6 mm
Art knife K1 (Xacto)
from 3,90 €
round aluminium handle, knurled grip zone, includes protective cap
Pressure roller, standard
from 17,90 €
5 mm thick hard-wearing, pressure elastic plastic covering, waterproof and limited oil-resistance, aluminium core with plastic hubs, sturdy flat steel support frame, nickel-plated, beech handle with transparent...
view more articles
This is Modulor
We Love Material
Whether for design, architecture, model making, DIY, artwork or stationery: over 30,000 articles that make the heart beat faster. For professionals. And aspiring professionals.
Inspiring & Unique
Abreast of all developments in the world of materials: At Modulor there are always new, first-class products waiting to be discovered. In all shapes and colours – and in many instances tailor-made.
A Tradition of Creative Expertise
Questions about materials? We provide personalized and competent advice. With over 25 years of experience our enthusiasm for materials continues unabated: +49 (0)30 690 360
PayPal, credit cards, direct debit – at Modulor paying is very simple. Pay after delivery? No problem: just select „Invoice“ as payment method.
We deliver with our logistics partner quickly and securely – upon inquiry, same day delivery is even available within the Berlin city limits.
Standard shipping is free within Germany for orders over €80.
A Berlin Original
All the products and even more ideas can be experienced in person at our Berlin-Kreuzberg store. Over two floors and more than 3,000 m².
Sign Up and Get 5€ Off Your Next Purchase
Exclusive vouchers and sale
All the news about Modulor
Welcome to Modulor
WITH or WITHOUT VAT?
As a business customer, see net prices - or as an individual customer, see all prices including sales tax.
Business customer Price with sales tax
Private customer with VAT
You can change your choice at the top of the page at any time in the future.