€ to €
29 article / 299 Variants
Sort by: Relevance
- Price - lowest first
- Price - highest first
- 2 VariantsTable E2 (set)from 280,00 €Frame material: steel tube, round, ø 21,3 mm (1/2"), wall thickness 1,75 mm, Table frame dimensions: h x w x l = 720 x 700/780 x 1350 mm , Table frame colour: black powder-coated (RAL 9005)
- 72 VariantsTable frame E2, side framefrom 120,00 €Material: steel tubing, round, ø 21,3 mm (1/2"), wall thickness 1,75 mm, Dimensions: height x depth, Surface: powder coated (except for chrome-plated and galvanized)
- 21 VariantsModulor Y2 table frame systemfrom 12,00 €Table leg, QS 10°, square: 30 x 30 mm, height w/o tabletop from 710 mm, hinged-foot ø 40 mm, Table leg, QL 10°, square: 30 x 30 mm, height w/o tabletop from 970 mm, hinged-foot ø 40 mm
- 12 VariantsTable frame E2, crossbarsfrom 65,00 €Material: steel, round, ø 21,3 mm (1/2"), wall thickness 1.75 mm, steel 1.5 mm, Dimensions: length = width of frame, Surface: powder coated (except for chrome-plated and galvanized)
- 28 VariantsTable frame system Modulor M2from 23,00 €Material: steel, wall thickness 2 mm, Table legs : profile: 30 x 30 mm, length: 430 mm, 730 mm, 930 ml; legs have plastic leveler screws (thread length 20 mm),
- Child´s table E2 (set)from 275,00 €frame/tabletop set: Kidz table frame E2 (steel pipe, round: 2 white side frames for offset crossbars, height is 520 mm, depth is 600 mm; 2 white crossbar struts, length is 1000 mm, 4 galvanized height adjusters for...
- 2 VariantsModulor Table M2 (set)from 200,00 €table frame/tabletop set: table frame (steel, painted, wall thickness is 2 mm, metallic grey surface (similar to RAL 7020) with orange-peel finish; frame rails: cross section 25 x 40 mm, legs: cross section 30 x 30...
- 24 VariantsModulor Table Frame T, height adjustablefrom 35,00 €Material: steel, in various thicknesses, Colour: powder-coated, deep black RAL 9005 matte, white aluminium RAL 9006 matte and traffic white RAL 9016 matte , Lifting columns: LINAK®, dual telescope columns: 50 x 80 mm (outer lower profile), 43,5 x 73,5 mm (inner upper profile), lifting speed ca. 38 mm ...
- 3 VariantsAccessories for E2 table frame, pins and screwsfrom 4,00 €replacement sets for lost parts, 1 alternative set of screws
- 12 VariantsCable duct for table frame E2from 65,00 €perforated steel sheet, powder coated (except for chrome-plated and galvanised
- Accessories for E2 table frame, castorsfrom 35,00 €rubber rollers of medium hardness, suitable for hard and soft floors, load-bearing capacity: 40 kg/roller
- 5 VariantsE2 table frame for childrenfrom 220,00 €Material: steel, round, ø 21,3 mm (1/2"), wall thickness 1.75 mm,, Surface: powder coated, white (RAL 9016), Contents of set: 2 side rails for offset crossbars h = 520 mm, d(epth) = 600 mm, 2 crossbars l = 1000 mm, 4 galvanized height adjusters, accesso ...
- 34 VariantsModulor Y2 table system, colouredfrom 14,00 €Colours: 18 different colours
- 2 VariantsModulor Table T1, height adjustablefrom 765,00 €Frame material: steel, Colour of frame: powder-coated, traffic white RAL 9015 matte, Size of frame: 600 x 1300 mm, 600 x 1500 mm, Tabletop material: melamine resin coated chipboard
- 6 VariantsTable top supporter for E2 table framefrom 70,00 €square steel tube, 30 x 30 mm, wall thickness is 2 mm, has round hole on both ends, ends are cut at 45 degree angle, each end with a drilled hole in the upper (longer) side for attaching the table top, foam rubber...
- 4 VariantsTable trestle Sinusfrom 219,00 €tubular (25 mm diameter) steel, inner diameter 20 mm, powder-coated or chrome-plated; plastic support pads for holding the tabletop, height-adjustable disc bases (30 mm diameter) with ball and socket joints and screw...
- Modulor table system M2 (set) for childrenfrom 250,00 €Table frame material: steel, outer leg 30 x 30 mm, inner leg 25 x 25 mm, rails 25 x 40 mm, wall thickness 2mm, Table frame dimensions: h x b x l = 500-740 mm, 680 ( 610 ) x 1200 ( 1130 ) mm
- 6 VariantsPC holder for table frame E2from 60,00 €2 flat steel brackets 3.0 x 500 x 25 mm (thickness x length x width), powder coated (except for the chromed and galvanized versions), 2 PP stretch cords 1.0 x 600 x 25 mm with push-in buckle and loop lock, 4 sliding...
- 28 VariantsModulor M2 table system, colouredfrom 23,00 €Colours: 18 different colours
- 8 VariantsAccessories for E2 table frame, plugsfrom 6,00 €NR-SBR rubber with high coefficient of friction, black or beige/white
- Table trestle Derkfrom 129,00 €Beech – laminated wood, clear varnished, (11 x 59 mm), eight piece, preassembled, includes screw set, Allen wrench and four rubber rings, given dimensions: height x width x length (in the case of width and length:...
- Table frame MT 1from 219,00 €two table supports that collapse towards table middle, steel pipe, round, ø 30 mm (middle brace ø 24 mm), h = 710 mm, d = 740 mm, includes attachment brackets and screws (25 mm); designed by Hauke...
- Accessories for E2 table frame, suction cupsfrom 10,00 €machined screws with plastic knurled head screw for insertion into height adjusters, transparent suction cup
- 5 VariantsAccessories for E2 table frame, tabletop supportfrom 9,50 €Material: plastic, polypropylene, in black, Dimensions: diameter is 55 mm, height including shaft is 25 mm, structural nubs = 5mm (with cover 7 mm)
- Modulor M2 table frame system for childrenfrom 200,00 €Table frame material: steel, legs 30 x 30 mm, rails 25 x 40 mm, wall thickness 2mm, Table frame dimensions: h x w x l = 500-740 mm, 680 (610) x 1200 (1130) mm
- 2 VariantsAccessories for E2 table frame, fastenersfrom 12,00 €hard plastic tube plugs with inner threads, machine screw with attached plastic plate or with a ball-shaped head and inclinable plastic plate
- 2 VariantsAccessories for E2 table frame, adjustable feetfrom 12,00 €rigid plastic insertable plug with inner threads, disc feet with adjustable machine screws
- 13 VariantsHeight adjuster for table frame E2from 22,00 €steel pipe, round, ø 17 mm, inner ø 14 mm, powder coated (except for chrome-plated and galvanised), includes 4 adjustment set pins