For those in a hurry, we offer a special selection of tables that are immediately available. These Y series classics are with you in a few days.
Design your Y table, save, and send your draft to your email. Finalize it whenever you want.
If you have any questions about specific configurations or materials, please feel free to contact us via our chat.
Melamine tabletop with edge veneer
275 cm x 140 cm
Linoleum tabletop with edge veneer
320 cm x 180 cm
Linoleum tabletop with polished Multiplex Birch core
300 cm x 150 cm
Linoleum tabletop with polished MDF core
240 cm x 180 cm
HPL table top with sanded multiplex edge
240 cm x 120 cm
HPL table top with sanded MDF edge
240 cm x 120 cm
Tabletop with edge veneer
3 mm
Linoleum and HPL table top with polished edge
3 mm, 25 mm or 50 mm
Melamine tabletop with edge veneer
19 mm or 25 mm
Linoleum tabletop with edge veneer
30 mm
Linoleum tabletop with polished Multiplex Birch core
20 mm or 26 mm
Linoleum tabletop with polished MDF core
21 mm
HPL table top with sanded multiplex edge
19 or 25 mm
HPL table top with sanded MDF edge
20 mm
We guarantee at least one defect-free A-side for melamine tops. Slight impairments in the surface quality of the B-side cannot be ruled out and are not grounds for complaint. Before you mount the board on the table frame, select the preferred board side.
With over 150 million variants, the Y table series is extraordinarily multifaceted and flexible. With its clear yet refined design vocabulary, it is just as suitable for the classic architectural office as it is for your studio or dining room.
Due to its construction, the sturdy Y table frame has a maximum surface load of 150 kg. The centrally positioned table frame provides stability; the mounted, refined table legs seem to make the table top float.
Our Y tables are also equipped with adjustable feet that provide stability on uneven floors. If you move to a new location, you can simply disassemble your Y table into its components.
Usually, the sides of a table are visible along the outer edges of the table top. With Y tables, the table frames are invisible in the center below the table top, connected to the table legs in the form of a Y. They draw their strength and their almost floating appearance from this construction.
If you're looking for a stable and durable tabletop, you can take a closer look at our wide range of products. What is there to discover? Solid and inexpensive melamine, robust HPL and natural linoleum table tops in a wide range of colours and shapes.
Where can I find tables that can be delivered quickly?
Directly on the right-hand side, above the selection menu, you have the possibility to view the tables of the Y series that are quickly available. Choose your desired configuration and look forward to your new Y table being delivered in a just few days.
Can I continue my configuration later?
If you have already started your configuration and want to finish it at a later time, you can save it and bring it back up later. Click on "Save Draft" at the bottom of the Configurator tool and enter your e-mail address. The configuration sent to you by e-mail can be resumed at any time.
I am a business customer and would like to order a larger number of tables.
If you are a business customer and are interested in ordering several tables, our B2B team will be there to help. Below the 3D presentation, you have the possibility to submit a request to the team, and they will respond as soon as possible.
What do I have to consider when entering the table dimensions?
In general, table top lengths below 130 cm can only be combined with table top widths of 80 cm or more. In contrast, table top widths below 80 cm can only be selected with table top lengths of 130 cm or more. The maximum table size of the Y tables is determined by the respective maximum dimensions of the table tops.
To which table tops can I add a veneer edge?
Both melamine and linoleum table tops can be fitted with a veneer made of real wood or ABS plastic. ABS plastic veneer is the same color as the selected color of the table top.
When choosing a linoleum tabletop, the color of the ABS veneer is always the same as the selected table top color. When choosing a melamine table top, the table top color and the color of the plastic veneer can be combined at will.
I'm looking for a table top with a polished edge.
Instead of an edge banding made of real wood or ABS plastic, you can also opt for a finely sanded tabletop edge. This option is available if you choose a linoleum or HPL tabletop. The sanded core of the tabletop can be made of multiplex birch or of a high-quality and moisture-repellent medium-density fibreboard (VALCHROMAT) in grey or anthracite.
I prefer a table top with a slanted edge.
The option of a 25° bevelled tabletop edge is available if you choose a linoleum or HPL tabletop with a sanded tabletop edge. The sanded tabletop core is optionally made of multiplex birch or of a high-quality and moisture-repellent medium-density fibreboard (VALCHROMAT) in grey or anthracite. Sanded board edges can be straight or bevelled at an angle of 25°. The bevelled edge supports the filigree, almost floating appearance of the table top.
The "25 mm radius" option cannot be combined with my selection.
If you choose a linoleum or HPL tabletop, you can give it a corner radius of your choice. If you want a tabletop with a lipping made of real wood or ABS plastic, your tabletop can have a standard 3 mm radius. Unfortunately, the 25 mm radius and the 50 mm radius cannot be realised with a real wood or plastic edge banding. If you choose a sanded tabletop edge instead of an edge banding, you have the choice between a 3 mm, 25 mm or 50 mm corner radius.
What are the parameters of the table height?
The table height of either 75 cm or 100 cm is made up of the height of the table frame and the thickness of the table top. The frame itself has a height of 71 cm (table at seat height) or 97 cm (high table). All table tops with edge banding are 3 cm thick. Linoleum table tops with sanded multiplex edges are 2.6 cm thick and with sanded MDF edges 2.1 cm thick. HPL tabletops have a thickness of 2 cm as an MDF version and 1.9 cm or 2.5 cm as a multiplex model. Accordingly, the total table height - depending on the tabletop - is between 72.9 cm or 98.9 cm and 74 cm or 100 cm. In the configurator, we have rounded these values to 75 cm or 100 cm.
I'm looking for a bar table.
After you have configured your table top, you can choose between different table frames under "Legs". The default height of a Y table is 75 cm. These are tables at seat height. Instead of a table height of 75 cm, you have the possibility to opt for a table height of 100 cm ... and there you have it, a bar table.
I just want to order a table frame without a table top.
If you only need a table frame, enter the length and width of your existing tabletop under "Dimensions". These measurements are essential, as the size of the table frame is based on the size of the table top. Then navigate to "Table top" and select "None". Now you can configure your preferred frame under "Legs".
What is the difference between slightly and sharply angled table legs?
All table legs of the Y table frames are tilted by at least 10°. This inclination ensures the floating effect of the tabletop and gives the sturdy table its lightness. When selecting a table leg from round tubing, the angle of inclination is not 10°, but 20° (slightly angled) or 30° (sharply angled). These two more tilted table leg variants not only make the table lighter, but they also look really dynamic.
* Valid for shipping within Germany. Learn more about our delivery conditions.
