Polyethylene (PE)

polyethylene, adjustable, locks in place, length scale, black carrying strap, black ring, threaded top with labelling field

isotropic hard ferrite 4/24p, mixed with flexible plastic (PE) binder, front side with permanent adhesive, reverse side is magnetic, high adhesive strength (0.55 N/cm²), th = 1.0 mm

polyethylene single-use mixing cups (HDPE), translucent, colourless, opening diameter: 82 mm (250 ml), 106 mm (600 ml), inner walls and bottom are smooth

semi-anisotropic hard ferrite 5/18p, mixed with flexible plastic (PE) binder, non-magnetic side has self-adhesive coat, high adhesive strength (0.40 N/cm²), th = 0.75 mm, weight is about 3,5 kg/m²

isotropic hard ferrite, mixed with flexible plastic (PE) binder, reverse side with permanent adhesive, front side is magnetic, th = 0.6 mm, 20 x 30 mm, comes on silicone paper

polyethylene, translucent, twist top

the non-magnetic side is covered in coloured PVC, semi-gloss, high adherence strength, th = 0.85 mm

LD-PE, translucent, colourless, glossy, nubs ø 10.0 mm, nub height = 3.0 mm, two ply, wrapped around a cardboard tube ø 76 mm

polyethylene, translucent, screws together in the middle

closed cell PE foam, adhesive: rubber-based, temperature resistant up to ca. 65 C°, on silicone paper, given dimensions: height x length x width

LD-PE, glossy, 4 layer (folded at 1.0 m), wrapped around cardboard tube ø 76 mm

LD-PE, glossy, UV- stabile, 4 layer (w = 4000 mm folded at 1 m), wrapped around cardboard tube ø 76 mm

polyethylene crosslinked by irradiation, semi-gloss, shrinkage rate 50%, minimum temperature for shrinking 120 °C, changes lengthwise by shrinking ± 10 %, permanent temperature resistance -55 to +105 °C,...

isotropic hard ferrite, mixed with flexible plastic (PE) binder, reverse side with permanent adhesive (without release paper), front side is magnetic, adhesive strength 0.12 N/cm², th = 0.35 mm, hand dispenser made...

polyethylene, black, opaque, adjustable length, can be locked into place, black, adjustable nylon carrying strap or, alternatively, a small white strap for hanging, lockable snap-on lid (case length is 630-1020 mm)...

LD-PE, colourless, glossy, wrapped around cardboard tube ø 76 mm

the non-magnetic side is paper coated, matte, adhesive strength 0,12 N/cm², th = 0,3 mm

non-magnetic side coated with coloured PVC, semi-gloss, high adhesive strength (0.40 N/cm²), th = 0.85 mm, weight is about 3 kg/m²

polyethylene, translucent, twist top

woven polyethylene sheath; solid elastic rubber core, plastic covered steel hooks, hook opening is about 14 mm, given length includes the hooks

plastic, adjustable jet, various colours

Polyethylene, approximates Form C, given dimensions: width of the material x inner length of link x outer width of link

fibres from 100% polyethylene, approx. 3 cm long, on a stabile woven carrier out of rayon calico

low density PE, transparent, colourless, glossy, wound on a cardboard tube which is ø 76 mm, weight of one roll is 3,5 kg

LDPE, translucent,colourless, glossy, bubble diameter is 10 mm, bubble height is 3.0 mm, two-ply

fibres are 100% polyethylene, approx. 1 cm long, on a fleece carrier that is a viscose/polyester blend

green colour, straight grass fibers made of PE monofilament, wavy grass fibres made of PE monofilament, the carrier mat is latex coated on the back, UV stabilized

100% polyethylene, glossy/matte, atlas weave, machine washable up to 30 °C

Polyethylene, 25 m version comes on plastic spool, diagonally running stripes: “right pointing” (see “information”).

12-plait braided HMPE (high-performance (modulus) polyethylene) sheath, PU coated, no core, breaking strength is 980 daN

non-magnetic side coated with white PVC, semi-gloss, high adhesive strength (0.40 N/cm²), th = 0.85 mm, weight is about 3 kg/m²