Material: Aluminium, Aluminium folded sheet: 4 pieces, each 100 mm x 200 mm x 50 mm, Aluminium base plate: 1 piece at 200 mm x 200 mm
from 16,90 €
natural rubber based air drying single component casting material (dispersion), pre-vulcanized with ammonia, medium hard, very elastic, very high viscosity (can be brushed and troweled), cures to a opaque amber...
fibreglass reinforced nylon housing, with 2.5 m long connecting cable and 50 cm long output cable
Mould release agent, low viscosity, water soluble
from 5,90 €
dyed to a reddish colour, polyvinyl alcohol-based; resistant to numerous solvents, styrol and benzene; ready-to-use, apply with cloth or brush, flash-off time: 15-20 minutes
Original Sculpey, white
from 13,50 €
oven-curing modelling compound (15 min. at 130 °C), very pliable, very crack resistant, miscible
Finishing paper, black
from 0,90 €
silicon carbide grit, hide glue bonding, backing paper 110 g/m², for manual or machine dry sanding of metal (not stainless steel), plastic, varnish and putty
Gedeo resin plaster
from 10,60 €
extra hard, high-quality alpha plaster, synthetic resin bonded, bright white, fine grained, non-clumping, mixing ratio of powder to water is 3:1; setting time is 8 – 15 minutes, demoulding time is 30 minutes,...
Weicon epoxy resin putty
from 26,90 €
product: 2 component epoxy resin modelling clay, End state: hardens to green colour, Working life: approx. 20-40 min.
Gedeo modeling clay
from 7,50 €
air-drying, has synthetic binders, does not crack as it dries, curing time is 4 to 5 days (can be shortened by use of a microwave over), after opening must be stored in moist cloth and enclosed in a tightly closed...
Pigments for Acrystal acrylic resin
from 29,90 €
liquid paint with high pigmentation and brilliancy for colouring the two component acrylic resin system, non-fading, solvent-free, odourless
Lightweight filler (hollow glass balls)
from 4,30 €
grey, powdery form, grain size is 0.01 - 0.25 mm, density is 0.6 g/cm³, (powder density is 0.4 g/cm³)
Stockmar modelling beeswax set
from 10,20 €
th = 6 mm, rich in pigments, made with pure beeswax, conforms to European Safety Norm EN 71 (toy safety; see info), for assorted colours in each set see info
Modelling knife, rust-proof
from 12,30 €
stainless steel, rust-proof, knurled handle, comes with two polished elastic blades
TFC silicone rubber type 3 heat resistant, set
from 27,90 €
Material: Silicone rubber, Shore hardness: A 33, Color: red, Mixing ratio: 1:1 by weight
Air-cured mould making compound
from 5,90 €
Product description: very soft and exact mould making compound, Attributes: air-drying, Colour: skin colour (caucasian)
from 4,90 €
Mould release wax, emulsion
from 4,90 €
flash-off time: 15 - 20 minutes, uses: 50 - 100 g per sq. metre, volume: 60 ml, color: colourless when dried
Sugru Create and Craft set
from 12,90 €
Kit Contents: 4 single packets Sugru 5 g in white, black, silver-gray and red (can be mixed with each other), 1 metal storage container, 2 to ..., Material: Air-hardening clay based on the silicone elastomer Formerol
FEW polyester finishing filler
from 9,90 €
thixotropic 2 component filler, polyester resin with BPO hardener (colourless), amine accelerator, density: approx. 1.8 g/cm³, very low pore volume, sands and polishes extremely well, cures to a cream white colour,...
Proxxon Thermocut 650 hot wire cutter
from 79,00 €
Material Housing: plastic injection, Material bracket: aluminum/plastic/steel, Cutting length: 400-650 mm, Depth of cut (passage): 200 mm
Sculpy 5 in 1 modeling tool
from 14,70 €
Product: 1 magnetic tool handle, 5 interchangeable heads, Material: tool heads made of metal and hard rubber
Solid lime wood pieces, rough-cut
from 8,10 €
air-dryed, all sides rough sawn
Wood modelling tools
from 1,45 €
chinese juniper, sanded and polished, l = 200 mm
Becks modeling clay for kids
from 1,70 €
made of microcrystalline waxes, pure paraffin oil and mineral fillers, food safe, conforms to EN71 toy safey norms, approved by consumer advocates Öku-Test (ecological test) and Spiel Gut (play well)
Special acrylic polishing cloth 2951
from 5,50 €
made from high quality cotton, very hard-wearing, thick-woven, especially soft, lint-free, washable to 40 °C
Disposable gloves, Latex
from 0,35 €
examination gloves, lightly powdered with corn starch, good quality
Proxxon hot wire cutter Thermocut 12/E
from 37,50 €
plastic housing, pivotable and extendable wire fixing element, infinitely variable cutting temperature, power cord is 0.5 m
Output: 60 W
Voltage: 12 V
Working temperature: adjustable from about 150 °C –...
Epoxy casting resin, water clear
from 34,90 €
cold-curing, two-component casting resin consisting of bisphenol A-epichlorohydrin and epoxy hardener with polyoxyalkyleneamine, unfilled, hard, very low viscosity (very pourable), cured material is colourless and...
from 3,90 €
TFC silicone rubber type 6 food safe, set
from 36,90 €
Material: Addition-curing 2 component silicone rubber, Shore hardness: A 22, Color: white (component A) and apricot (component B), Mixing ratio: 1:1 by weight
Creaplast design plaster
from 6,90 €
white, mixing ratio of powder to water is 2:1, working life: 35-40 minutes, setting time: approx. 60 minutes, surface hardness (cured): >190 N/mm², temperature resistance (cured): short term up to 170 °C.
Silk Clay modelling material, permanently elastic
from 2,50 €
Material: very soft, light modeling compound, Properties: air-drying, remains elastic after drying, Drying time: 2-24 hours, depending on object size, Packaging: resealable plastic can
Proxxon model building and engraving set
from 77,50 €
Material: Housing as glass-fibre reinforced polyamide, Operating voltage: 12 - 18 V, Power: Up to 40 W, Speed: 5,000 - 20,000 rpm
Fimo modelling clay Air Light 8131
from 6,60 €
Drying time: 24 hours in the air and 10 minutes in the microwave, Packaging: air-tight aluminium-PE composite, Weight: 250 g
Whether for design, architecture, model making, DIY, artwork or stationery: over 30,000 articles that make the heart beat faster. For professionals. And aspiring professionals.
Inspiring & Unique
Abreast of all developments in the world of materials: At Modulor there are always new, first-class products waiting to be discovered. In all shapes and colours – and in many instances tailor-made.
A Tradition of Creative Expertise
Questions about materials? We provide personalized and competent advice. With over 25 years of experience our enthusiasm for materials continues unabated: +49 (0)30 690 360
PayPal, credit cards, direct debit – at Modulor paying is very simple. Pay after delivery? No problem: just select „Invoice“ as payment method.
We deliver with our logistics partner quickly and securely – upon inquiry, same day delivery is even available within the Berlin city limits.
Standard shipping is free within Germany for orders over €80.
A Berlin Original
All the products and even more ideas can be experienced in person at our Berlin-Kreuzberg store. Over two floors and more than 3,000 m².
Sign Up and Get 5€ Off Your Next Purchase
Exclusive vouchers and sale
All the news about Modulor
Welcome to Modulor
WITH or WITHOUT VAT?
As a business customer, see net prices - or as an individual customer, see all prices including sales tax.
Business customer Price with sales tax
Private customer with VAT
You can change your choice at the top of the page at any time in the future.