| Article No. |
|---|
synthetic resin based primer in a aerosol can, can be painted over after about 5 minutes, weather resistant
Dupli-Color plastic primer is the perfect bonding agent when working with the combination of plastic and paint. It is suitable for both indoor and outdoor use. After it has been applied (sprayed), a colourless, translucent coating is produced, one that is ready to be spray-painted after only five minutes. The types of paint it accepts is basically unlimited – acrylic, synthetic resin and nitro-synthetic (nitro-combi) based paints can all be used but, it should be noted, a preliminary test should be carried out for any first-time combination of primer and paint because you can never be completely sure about compatibility among these products. We have tested the compatibility of our spray paints MARABU SPRAY PAINT and AEROCOR SPRAY PAINT and found them to be perfectly acceptable – our recommending these is therefore not just self-serving! In addition, and as you might expect, all the Dupli-Color spray paints are of course compatible as well!
The plastic primer can be used with the following plastics: polyurethane (PUR), polystyrene (PS), polyamide (PA), acrylonitrile butadiene styrene (ABS), (fibre)glass reinforced plastic (GRP) and rigid PVC. In the case of polystyrene rigid foam (Styrofoam, polystyrene, etc.) we carry the POLYSTYRENE PRIMER to serve as a barrier layer.
One can (400 ml) of primer is enough to cover an area of about 5 to 6 m2.
Gefahr, (VOC-Gehalt/Wert (EU) = 753,9 g/l / 98,51 %), Butan (< 0,1% Butadien (203-450-8)) = 12,5 - < 20 %, Ethylacetat = 25 - < 50 %, Isobutan (enthält < 0,1% Butadien (203-450-8)) = 5 - < 10 %, Propan = 20 - < 25 %, Xylol (Isomerengemisch) = 5 - < 10 %, n-Butylacetat = 5 - < 10 %, Aerosol 1, Eye Irrit. 2, STOT SE 3
- EUH066: Repeated exposure may cause skin dryness or cracking.
- EUH205: Contains epoxy constituents. May produce an allergic reaction.
- H222+H229: Extrem entzündbares Aerosol. Behälter steht unter Druck: kann bei Erwärmung bersten.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- P101: If medical advice is needed, have product container or label at hand.
- P102: Keep out of reach of children.
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211: Do not spray on an open flame or other ignition source.
- P251: Do not pierce or burn, aven after use.
- P260: Do not breathe dust / fume / gas / mist / vapours / spray.
- P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50°C / 122°F.
- P501: Dispose of contents / container to …
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.
| Article No. |
|---|
synthetic resin based primer in a aerosol can, can be painted over after about 5 minutes, weather resistant
Dupli-Color plastic primer is the perfect bonding agent when working with the combination of plastic and paint. It is suitable for both indoor and outdoor use. After it has been applied (sprayed), a colourless, translucent coating is produced, one that is ready to be spray-painted after only five minutes. The types of paint it accepts is basically unlimited – acrylic, synthetic resin and nitro-synthetic (nitro-combi) based paints can all be used but, it should be noted, a preliminary test should be carried out for any first-time combination of primer and paint because you can never be completely sure about compatibility among these products. We have tested the compatibility of our spray paints MARABU SPRAY PAINT and AEROCOR SPRAY PAINT and found them to be perfectly acceptable – our recommending these is therefore not just self-serving! In addition, and as you might expect, all the Dupli-Color spray paints are of course compatible as well!
The plastic primer can be used with the following plastics: polyurethane (PUR), polystyrene (PS), polyamide (PA), acrylonitrile butadiene styrene (ABS), (fibre)glass reinforced plastic (GRP) and rigid PVC. In the case of polystyrene rigid foam (Styrofoam, polystyrene, etc.) we carry the POLYSTYRENE PRIMER to serve as a barrier layer.
One can (400 ml) of primer is enough to cover an area of about 5 to 6 m2.
Gefahr, (VOC-Gehalt/Wert (EU) = 753,9 g/l / 98,51 %), Butan (< 0,1% Butadien (203-450-8)) = 12,5 - < 20 %, Ethylacetat = 25 - < 50 %, Isobutan (enthält < 0,1% Butadien (203-450-8)) = 5 - < 10 %, Propan = 20 - < 25 %, Xylol (Isomerengemisch) = 5 - < 10 %, n-Butylacetat = 5 - < 10 %, Aerosol 1, Eye Irrit. 2, STOT SE 3
- EUH066: Repeated exposure may cause skin dryness or cracking.
- EUH205: Contains epoxy constituents. May produce an allergic reaction.
- H222+H229: Extrem entzündbares Aerosol. Behälter steht unter Druck: kann bei Erwärmung bersten.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- P101: If medical advice is needed, have product container or label at hand.
- P102: Keep out of reach of children.
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211: Do not spray on an open flame or other ignition source.
- P251: Do not pierce or burn, aven after use.
- P260: Do not breathe dust / fume / gas / mist / vapours / spray.
- P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50°C / 122°F.
- P501: Dispose of contents / container to …
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.