Weicon

ethyl cyanoacrylate adhesive, sets colourlessly, begins adhering after 5 - 120 seconds

ethyl cyanoacrylate adhesive, sets colourlessly, begins adhering after 5 - 60 seconds

ethyl cyanoacrylate adhesive, sets colourlessly, begins adhering after 2 - 60 seconds

two component epoxy resin adhesive, without fillers, viscous, transparent, working life: 3 - 4 minutes, mixing ratio 1:1, temperature resistant from -50 to +80 °C

inductor (catalyst) for all commercial super glues, colourless

single component adhesive and sealing compound, transparent, hardens at room temperature with practically no shrinkage, temperature resistant from -50 °C to +180 °C (short term to 260 °C)

for detachable joints; adhesive based on synthetic elastomers (rubber), colourless, CANNOT be used on polystyrene foam, open time (working time) is 60 minutes maximum

ethyl cyanoacrylate adhesive, sets colourlessly, begins adhering after approx. 25 - 100 seconds

for permanent joints; adhesive based on synthetic elastomers (rubber), cream coloured, limited use on polystyrene foam possible, open time (working time) is 30 minutes maximum

for durable and permanent joints; adhesive based on synthetic elastomers (rubber), adjustable spray pattern, cream coloured, NOT suitable for polystyrene foam, open time (working time) 45 minutes maximum

high proportion of metal pigments in the dry spray film

extremely tacky, single component adhesive made out of POP copolymer, permanently elastic, can be painted, UV stable, weather resistant, can be sanded, isocyanate-free, temperature resistant from -40 °C to +90 °C...

comes with thin tube extension for the spray head

2 component epoxy resin modelling material, embedded with ceramic, cures to white colour, working life approx. 15 minutes, curing time approx. 60 minutes, temperature-resistant from -50 to +120 °C, re-closeable

light filler, glass-hard, white

2 component epoxy resin modelling material, embedded with minerals, cures to beige colour, working life approx. 15 minutes, curing time approx. 60 minutes, temperature-resistant from -50 to +120 °C, re-closeable

cyanoacrylate adhesive pretreatment for "unglueable" or difficult to glue plastics such as PP and PE

alkoxy cyanoacrylate adhesive, low viscosity, weak smelling, sets colourlessly, begins adhering after approx. 10 - 150 seconds

2 component epoxy resin modelling material, embedded with aluminium, cures to aluminium colours, working life approx. 4 minutes, curing time approx. 30 minutes, temperature-resistant from -50 to +120 °C, re-closeable

two component methacrylate-based reaction adhesive, high strength adhesion, residual elasticity, utilized with the "no mix process" (no mixing!), transparent, colourless, temperature resistant from -40 °C to +130...