Crystal-clear two-component casting resin
For casting in high layers (up to 5 cm)
Forms high-gloss surfaces
Good UV stability
Can be processed for a long time (2 - 4 h)
| Article No. | |
|---|---|
| Mixing ratio | 100 : 45 |
| Processing temperature | 20 °C |
| Pot life | 2 - 4 hours |
| Min. pouring height | 1 cm (up to 100 kg) |
| Max. Pouring height | 5 cm (up to 25 kg) |
| Demoldable after | 4 days |
| Final strength after | 8 days |
| Adhesive-free after | 3 days |
| Temperature resistance | up to 60 °C |
The thick-layer epoxy casting resin system consists of two components (resin and hardener), which are mixed together in a ratio of 100:45 and can then be processed for up to 4 hours. The casting resin has been specially designed for casting in high layers. It provides a crystal clear, glossy finish and is particularly suitable for applications such as river tables, resin-filled lights and other creative casting projects with wood components. It is formulated to be UV stable so that it retains its clarity for a long time and, with due care, it is easy to apply without bubbles.
Due to its composition, it allows casting up to 5 cm layer thickness per casting, provided that the total volume and temperature conditions are suitable. The environment and the components must not be warmer than 20 °C and not colder than 15 °C. With a layer thickness of 5 cm, the total volume of the casting must not exceed 25 kg, with a layer thickness of 2.5 cm up to 50 kg can be processed in one casting and with a layer thickness of 1.0 cm up to 100 kg. Too thick castings with too large quantities lead to higher temperatures in the material during curing, which results in stress cracks, very large shrinkage and boiling bubbles. This casting resin is not suitable for layer thicknesses of less than 1.0 cm.
General processing instructions
- The wood or the objects to be embedded must be clean and free of dust, oil and grease. The moisture content must be below 13 %. Acidic woods in particular can lead to reaction problems.
- Have all components ready and store resin and hardener at 20 °C in advance. Also observe the room and ambient temperature, which must not be below 15 °C, but also not above 20 °C.
- Avoid frost and moisture during curing and the following 7 days.
- Observe the information on the maximum layer height and always mix only the required quantities.
- Do not use any other additives such as deaerators. These can have a negative effect on the properties of the resin. This can lead to clouding, for example.
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.
Crystal-clear two-component casting resin
For casting in high layers (up to 5 cm)
Forms high-gloss surfaces
Good UV stability
Can be processed for a long time (2 - 4 h)
| Article No. | |
|---|---|
| Mixing ratio | 100 : 45 |
| Processing temperature | 20 °C |
| Pot life | 2 - 4 hours |
| Min. pouring height | 1 cm (up to 100 kg) |
| Max. Pouring height | 5 cm (up to 25 kg) |
| Demoldable after | 4 days |
| Final strength after | 8 days |
| Adhesive-free after | 3 days |
| Temperature resistance | up to 60 °C |
The thick-layer epoxy casting resin system consists of two components (resin and hardener), which are mixed together in a ratio of 100:45 and can then be processed for up to 4 hours. The casting resin has been specially designed for casting in high layers. It provides a crystal clear, glossy finish and is particularly suitable for applications such as river tables, resin-filled lights and other creative casting projects with wood components. It is formulated to be UV stable so that it retains its clarity for a long time and, with due care, it is easy to apply without bubbles.
Due to its composition, it allows casting up to 5 cm layer thickness per casting, provided that the total volume and temperature conditions are suitable. The environment and the components must not be warmer than 20 °C and not colder than 15 °C. With a layer thickness of 5 cm, the total volume of the casting must not exceed 25 kg, with a layer thickness of 2.5 cm up to 50 kg can be processed in one casting and with a layer thickness of 1.0 cm up to 100 kg. Too thick castings with too large quantities lead to higher temperatures in the material during curing, which results in stress cracks, very large shrinkage and boiling bubbles. This casting resin is not suitable for layer thicknesses of less than 1.0 cm.
General processing instructions
- The wood or the objects to be embedded must be clean and free of dust, oil and grease. The moisture content must be below 13 %. Acidic woods in particular can lead to reaction problems.
- Have all components ready and store resin and hardener at 20 °C in advance. Also observe the room and ambient temperature, which must not be below 15 °C, but also not above 20 °C.
- Avoid frost and moisture during curing and the following 7 days.
- Observe the information on the maximum layer height and always mix only the required quantities.
- Do not use any other additives such as deaerators. These can have a negative effect on the properties of the resin. This can lead to clouding, for example.
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.