Pull saw blade for Japanese saws, heat-treated and hardened
Extremely hard and tough thanks to high-frequency hardening of the steel
Long-lasting and sharp - perfect for fine cuts
16 teeth per inch, cross-ground for clean cutting surfaces
For cross cuts, longitudinal cuts and diagonal cuts
| Location in Store | |
|---|---|
| Article No. | 3021225-ST |
| Material SK 95 | Spring steel, specially heat-treated |
| Blade length | 265 mm |
| Blade thickness | 0.6 mm |
| Teeth per inch | 16 |
| Tooth geometry | triple ground, hardened teeth for pull cutting |
| Cutting width | 0.9 mm |
| Suitable for | Japanese handsaw 265 with rattan handle |
| Cuts | Wood, knots, chipboard, skirting boards, drywall, ... |
This saw blade is the right replacement blade for your Japanese handsaw 265 and can be changed without tools: You loosen the clamping device on the saw, remove the old blade and insert the new one without any additional tools. This allows you to restore the original cutting performance of your saw in just a few simple steps.
Like the saw itself, the blade cuts in a pull cut. When sawing, the load is applied when you pull the saw towards you. This allows the blade to be thinner than with pressure-loaded saws without warping. This results in precise, controlled cuts with comparatively little effort. The fine toothing with 16 teeth per inch is designed for clean fine cuts and significantly reduces tears at the cutting edge.
The SK 95 spring steel used is hardened using a special Japanese heat treatment process. Triple-ground teeth and impulse hardening are used, which increases the service life and keeps the sharpness stable over many cuts. At the same time, the blade remains elastic enough to absorb slight bends during use without becoming permanently deformed.
With a blade length of 265 mm, the saw is still handy, but at the same time it offers sufficient cutting length to safely cut through medium-sized pieces of wood. The replacement blade is used wherever the handsaw itself is recommended: for woodwork in interior fittings, for cutting skirting boards, profiles, chipboard or plasterboard and for cutting knots and other wood cross-sections to length.
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 99 €.
5,95 € shipping costs, if order value is less than 99 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 99 €
Forwarding shipping
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.
Saw blade for Japanese handsaw 265
Pull saw blade for Japanese saws, heat-treated and hardened
Extremely hard and tough thanks to high-frequency hardening of the steel
Long-lasting and sharp - perfect for fine cuts
16 teeth per inch, cross-ground for clean cutting surfaces
For cross cuts, longitudinal cuts and diagonal cuts
| Location in Store | |
|---|---|
| Article No. | 3021225-ST |
| Material SK 95 | Spring steel, specially heat-treated |
| Blade length | 265 mm |
| Blade thickness | 0.6 mm |
| Teeth per inch | 16 |
| Tooth geometry | triple ground, hardened teeth for pull cutting |
| Cutting width | 0.9 mm |
| Suitable for | Japanese handsaw 265 with rattan handle |
| Cuts | Wood, knots, chipboard, skirting boards, drywall, ... |
This saw blade is the right replacement blade for your Japanese handsaw 265 and can be changed without tools: You loosen the clamping device on the saw, remove the old blade and insert the new one without any additional tools. This allows you to restore the original cutting performance of your saw in just a few simple steps.
Like the saw itself, the blade cuts in a pull cut. When sawing, the load is applied when you pull the saw towards you. This allows the blade to be thinner than with pressure-loaded saws without warping. This results in precise, controlled cuts with comparatively little effort. The fine toothing with 16 teeth per inch is designed for clean fine cuts and significantly reduces tears at the cutting edge.
The SK 95 spring steel used is hardened using a special Japanese heat treatment process. Triple-ground teeth and impulse hardening are used, which increases the service life and keeps the sharpness stable over many cuts. At the same time, the blade remains elastic enough to absorb slight bends during use without becoming permanently deformed.
With a blade length of 265 mm, the saw is still handy, but at the same time it offers sufficient cutting length to safely cut through medium-sized pieces of wood. The replacement blade is used wherever the handsaw itself is recommended: for woodwork in interior fittings, for cutting skirting boards, profiles, chipboard or plasterboard and for cutting knots and other wood cross-sections to length.
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 99 €.
5,95 € shipping costs, if order value is less than 99 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 99 €
Forwarding shipping
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.