Pull saw blade for Tajima Japanese saws, heat-treated and hardened
Extremely hard and tough thanks to high-frequency hardening of the steel
Long-lasting and sharp - perfect for fine cuts
16 teeth per inch, cross-ground for clean cutting surfaces
| Article No. | |
|---|---|
| Material | SK 95 spring steel, specially heat-treated |
| Blade length | 230 mm |
| Blade thickness | 0.6 mm |
| Teeth per inch | 16 |
| Tooth geometry | triple ground, hardened teeth for pull cutting |
| Cutting width | 0.9 mm |
| Suitable for | Japanese handsaw 230 with elastomer handle |
| Cuts | Wood, knots, chipboard, skirting boards, drywall, ... |
This saw blade is the right replacement blade for your Japanese handsaw 230 and can be changed without tools: You loosen the clamping device on the saw, remove the old blade and insert the new one without any additional tools. This allows you to restore the original cutting performance of your saw in just a few simple steps.
Like the saw itself, the blade cuts in a pull cut. When sawing, the load is applied when you pull the saw towards you. This allows the blade to be thinner than with pressure-loaded saws without warping. This results in precise, controlled cuts with comparatively little effort. The fine toothing with 16 teeth per inch is designed for clean fine cuts and significantly reduces tears at the cutting edge.
The SK 95 spring steel used is hardened using a special Japanese heat treatment process. Triple-ground teeth and impulse hardening are used, which increases the service life and keeps the sharpness stable over many cuts. At the same time, the blade remains elastic enough to absorb slight bends during use without becoming permanently deformed.
With a blade length of 230 mm, the saw blade remains compact. You can easily reach tight spaces in interior fittings or furniture construction and still have sufficient cutting depth. The replacement blade is used wherever the handsaw itself is recommended: for woodwork in interior fittings, when sawing skirting boards, profiles, chipboard or plasterboard and when cutting knots and other wood cross-sections to length.
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.
Pull saw blade for Tajima Japanese saws, heat-treated and hardened
Extremely hard and tough thanks to high-frequency hardening of the steel
Long-lasting and sharp - perfect for fine cuts
16 teeth per inch, cross-ground for clean cutting surfaces
| Article No. | |
|---|---|
| Material | SK 95 spring steel, specially heat-treated |
| Blade length | 230 mm |
| Blade thickness | 0.6 mm |
| Teeth per inch | 16 |
| Tooth geometry | triple ground, hardened teeth for pull cutting |
| Cutting width | 0.9 mm |
| Suitable for | Japanese handsaw 230 with elastomer handle |
| Cuts | Wood, knots, chipboard, skirting boards, drywall, ... |
This saw blade is the right replacement blade for your Japanese handsaw 230 and can be changed without tools: You loosen the clamping device on the saw, remove the old blade and insert the new one without any additional tools. This allows you to restore the original cutting performance of your saw in just a few simple steps.
Like the saw itself, the blade cuts in a pull cut. When sawing, the load is applied when you pull the saw towards you. This allows the blade to be thinner than with pressure-loaded saws without warping. This results in precise, controlled cuts with comparatively little effort. The fine toothing with 16 teeth per inch is designed for clean fine cuts and significantly reduces tears at the cutting edge.
The SK 95 spring steel used is hardened using a special Japanese heat treatment process. Triple-ground teeth and impulse hardening are used, which increases the service life and keeps the sharpness stable over many cuts. At the same time, the blade remains elastic enough to absorb slight bends during use without becoming permanently deformed.
With a blade length of 230 mm, the saw blade remains compact. You can easily reach tight spaces in interior fittings or furniture construction and still have sufficient cutting depth. The replacement blade is used wherever the handsaw itself is recommended: for woodwork in interior fittings, when sawing skirting boards, profiles, chipboard or plasterboard and when cutting knots and other wood cross-sections to length.
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.