Get a €5 discount on your order in the online store
Location in StoreEGI79A
Article No.0262639

for sandwich panels 3 to 10 mm thick, transparent acrylic dome, plastic handle and crank lever with centre depth indicator knob, metal rail with inch and metric graduations, blade holder with set screw and magnetic blade positioning aid, blades are changeable, centring pin without penetration, for circles with 25 to 152 mm diameters (1 to 6 inches)

The FoamWerks circle cutter effortlessly cuts exact circles with clean edges in sandwich panels with paper cover layers (KAPA, FOAM BOARD), polystyrene foam or polystyrene rigid foam boards.

Before cutting, the middle point of the desired circle should be marked on the board and then the circle cutter, which should already have been adjusted for the desired diameter, then positioned so that the centre pin lies directly over that mark. You then hold the dome in place with one hand and turn the blue crank lever in a clockwise direction with the other hand until you are sure that you have cut all the way through the board. In doing this, the small knob at the top of the cutter serves as an aid in that it drops lower and lower into its housing with each revolution of the crank and thereby shows the approximate depth of the cut. After you have made your cut, the cutting arm with the blade should be returned to its uppermost position by turning the crank counter-clockwise until the depth indicator knob sticks out completely. There is otherwise always the danger that when using this tool the next time the blade that was left in the lowered position will damage the surface of your new sandwich panel when you place the dome on it.

Tip: When cutting circles with diameters under 50 mm, you will achieve better edge quality if you place two pieces of scrap sandwich panel under your work piece so that there is an air space under the area to be cut out.

The right replacement blades, Type WA, can be found under FOAMWERKS REPLACEMENT BLADES.

You should always use a scrap piece of foam board underneath the piece you are cutting. The cutting mats made out of PVC that we usually strongly recommend as cutting underlays are too hard and too dense for use with the sensitive blades in FoamWerks tools.

Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 79 €.

5,95 € shipping costs, if order value is less than 79 € (DE)

2,95 € for pick-up at the store in Berlin, if order value is less than 79 €


Express and forwarding shipping

From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.

From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .


Especially for Berlin

From 34.90 € courier shipping for standard and forwarding goods.

  • Free returns for standard shipping within Germany
  • Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
  • You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany


Excluded from returns

Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.

Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.

Foamwerks circle cutter WA-8001

incl. 5 blades WA
incl. VAT / excl. shipping
98,90 €
incl. VAT / excl. shipping
Standard shipping free from 79€ (DE)Free 30-day return (DE)
Only 4 articles left