This “Epoxy casting resin, water clear” product is a very low viscosity, to a large extent shrinkage-free, particularly pourable resin that produces a highly transparent cast piece that has a very smooth, polishable surface – it is also sold in comparatively small amounts. Even when mixing only a small amount, it has good reactivity which is why even cast objects that are 500 grams or less will be formed without the surface of the poured material sinking or becoming concave during curing, or, if it does, only to a very minimal extent. This casting resin is almost completely colourless, only exhibiting the slightly yellowish tone that is typical for epoxy. Even when poured in thin coats it cures without stickiness, which makes it as great a choice for transparent coatings as it is for the embedding and covering of objects. This epoxy is normally used in an unreinforced form but it can also be used in a reinforced form as a laminating resin (with a very long pot life) even if there are in fact other, probably better resins that have been specially developed for just that purpose.
This resin can also be used to pour casts - for example in silicone moulds- for the production of extremely impact resistant, especially sturdy small parts or elements for use in making jewellery or objects for other design oriented sectors. For more information concerning this use, please consult the information under condensation-crosslinked silicone. This resin can be coloured by means of dyes for synthetic resin paints.
If you plan on pouring this resin to make large blocks, one problem you will confront is the exothermic reaction, which in the case of large volumes is increased considerably. To solve this problem, you will have to work in stages whereby each coat should not be thicker than 50 mm.
This resin has a very long curing time, which can be disadvantageous for many applications. It was the constant requests for a very pourable resin that could produce highly transparent castings without having to employ a vacuum pump that led us to include this product, despite its very long pot life, in our assortment.
Danger, Bisphenol-A-Epichlorhydrinharze mit durchschnittlichem Molekulargewicht <= 700 = 50-100%, Bisphenol-F-Epichlorhydrin-Harz = 10 - 25 %, 1,6-Bis(2,3-epoxypropoxy)hexan = 10 - 25 %, (VOC-Gehalt = 90 % (918 g/l)), Polyoxyalkylendiamin = 100%, (VOC-Gehalt = 0,0 %), Ätz-/Reizwirkung auf die Haut: Hautreiz. 2, Schwere Augenschädigung/Augenreizung: Augenreiz. 2, Sensibilisierung der Atemwege/Haut: Sens. Haut 1, Gewässergefährdend: Aqu. chron. 2, Ätz-/Reizwirkung auf die Haut: Hautätz. 1B, Schwere Augenschädigung/Augenreizung: Augenschäd. 1
- EUH205: Contains epoxy constituents. May produce an allergic reaction.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.
- H314: Causes severe skin burns and eye damage.
- P302+P352: IF ON SKIN: Wash with plenty of water / …
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P403+P233: Store in a well-ventilated place. Keep container tightly closed.
- P260: Do not breathe dust / fume / gas / mist / vapours / spray.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
- P310: Immediately call a POISON CENTER / doctor / …
- P405: Store locked up.