We have a lot going on. Therefore we ask you for your patience while answering your request. Thank you for your understanding! Click for all further information about the second lockdown.
Worktop: multiplex, covered with anodised, chequered aluminium, Worktop dimensions: 265 x 610 mm, Bracket: guide bar moves along the side on ball bearings, front and back adjustable buffers
Proxxon Thermocut hot wire cutter
from 109,00 €
Housing material: plastic injection moulding, Worktop material: aluminium-cobond Alu/PE laminated panel, Dimensions: 280 mm x 390 mm, Transformer: secondary; max. 10 V at 1 A
fibreglass reinforced nylon housing, with 2.5 m long connecting cable and 50 cm long output cable
Proxxon hot wire cutter Thermocut 12/E
from 37,50 €
plastic housing, pivotable and extendable wire fixing element, infinitely variable cutting temperature, power cord is 0.5 m
Output: 60 W
Voltage: 12 V
Working temperature: adjustable from about 150 °C –...
SILHOUETTE PORTRAIT 3 electronic cutting tool
from 239,00 €
Housing: plastic housing with cover flap, Equipment: automatic knife (knife holder with 1 blade), cutting mat (8 " = 203mm), USB cable, power supply and cable, 1 month subscription ...
with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness
Cutting wire for hot wire cutters
from 1,95 €
NiCr 8020 hot cutting wire
Silhouette Cameo replacement blade
from 14,90 €
Proxxon precision machine vice FMZ
from 32,50 €
with die-cast zinc clamp for worktops up to 60 mm thick, ball joint (rotates and swings in all directions), 75 mm jaws with rubber covering for sensitive work pieces, weighs 1.6 kg
3 Variants
Proxxon tungsten-vanadium steel twist drill bits
from 3,95 €
purpose-made and selected wolfram vanadium steel, shafts and drill tips manufactured from one-piece blanks, shaft ø 2.35 mm, l (total) = 44 mm
Proxxon Thermocut 650 hot wire cutter
from 79,00 €
Material Housing: plastic injection, Material bracket: aluminum/plastic/steel, Cutting length: 400-650 mm, Depth of cut (passage): 200 mm
SILHOUETTE CAMEO 4 cutter plotter
from 330,00 €
Housing: Plastic housing with cover flap, white, Equipment: 2 tool heads, integrated roll holder, integrated cross cutter, self-adhesive cutting mat, USB cable
Material: Housing as glass-fibre reinforced polyamide, Operating voltage: 12 - 18 V, Power: Up to 40 W, Speed: 5,000 - 20,000 rpm
Steinel HL 1920 E heat gun
from 74,50 €
Output: 2000 Watt, Voltage: 230 Volt, Temperature adjustable at 9 levels: 80 - 600 °C, Air volume set at three different levels: 150, 300, 500 l/Min
Proxxon scroll saw DSH
from 239,00 €
machine base of cast iron with rubber feet; very large, stable die-cast aluminium saw table of 360 x 280 mm (tilts up to 45° for mitre cuts); quiet induction motor with switchable speed control, 2 slender parallel...
Proxxon precision drill grinder FBS 240/E
from 67,50 €
sturdy fibreglass-reinforced polyamide housing with comfort sections in the grip area and a 20 mm collar that fits to the Micromot system components, spindle runs in precision ball bearing and is fitted with a lock...
Styrocut, mitre fence
from 49,00 €
aluminium
Proxxon circular table saw KS 230
from 125,00 €
ABS plastic housing with a sliding side door allowing easy removal of sawdust; machined, die-cast aluminium table 160 x 160 mm, quiet high performance motor tested for prolonged use, saw blade shaft runs is equipped...
Access. f Graphtec CE6000-40 cutting mat
from 79,00 €
2 Variants
Nozzles for Steinel hot air gun
from 7,90 €
stainless steel
Styrocut, circle cutter
from 109,00 €
plywood board, brass, aluminium
Proxxon mains adaptor Micromot NG 2/E
from 33,00 €
compact housing made from Noryl (especially heat-resistant as is essential for transformers), thyristor electronic speed control (with feedback), overload protection (Positive Temperature Coefficient resistance), 1...
Proxxon diamondized cutting discs
from 8,90 €
with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness
Proxxon replacement cutting wire Thermocut 12/E
from 14,90 €
easy to bend, anti-adherence coating, 1.5 Ω electrical resistance
Silhouette Cameo SIL blade
from 15,90 €
Kaleas table circular saw
from 259,00 €
sturdy die-cast aluminium construction, table is 220 x 210 mm, collar on the side for grinding disc, saw blade adjustable for height (0 - 15 mm) and able to be tilted (90° - 45°), recepticle for standard commercial...
3 Variants
Replacement parts for Kaleas circular table saw
from 6,40 €
Kaleas high power transformer 4
from 76,90 €
Input voltage: 230 V, 50/60 Hz, Output voltage: 5 – 12 V/DC, short-term 15 V, Output current: 0 – 10 A, short-term 15 A, Output power: 120 W constant, 180 W short-term
11 Variants
Sanding discs for Hegner HSM 300
from 29,90 €
ø 300 mm
Kaleas sanding pads for table circular saw
from 6,10 €
view more articles
✖
Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information
Welcome to Modulor
WITH or WITHOUT VAT?
As a business customer, see net prices - or as an individual customer, see all prices including sales tax.