We have quite a lot going on. Therefore, we ask for your patience in responding to request. We will keep you up to date. Click for more info about the lockdown.
Transparency: opaque, Material: Inner layers of rigid PVC, top layers of soft PVC, Material layers: 5-ply, Material thickness: 3 mm
4 Variants
Ecobra cutting mat, top quality translucent
from 9,90 €
material: inner layer made from hard PVC, top layer from soft PVC, Material layers: 3-layered, Material strength: 3 mm, Features: one side printed with grid design and cm graduation
Folding bone
from 5,90 €
material: bone
Aluminium cutting ruler with incumbent steel edge
from 13,90 €
thin, anodized aluminium, incumbent steel edge for cutting and laying out templates, aluminium beveled face with imprinted mm graduation, anti-slip (rubberized) reverse side, comes in soft plastic case, th = 6 mm, w...
Snap-off standard blades for 9 mm cutter, pointed
from 2,40 €
come in translucent plastic case
Awl
from 14,90 €
Product description: light coloured wooden handle, ergonomically shaped with brash bush, diameter: 1.9 mm tip
Ecobra metal cutter, for 9 mm blades, lock screw
from 5,70 €
silver aluminium handle with chromed steel clip, unrestricted feeder, positioning lock screw, blade in metal guide
Ecobra cutter, metal, silver
from 7,00 €
Material: full metal housing, steel blade, Colour: silver, Attributes: metal cutter guide, notched slider, auto lock, Configuration: with hole for hanging, clip and breakoff device
6 Variants
Ulmer steel cutting square with facing
from 25,50 €
steel, open-worked with a bar in the middle, painted grey, bevelled edge on a side piece, without graduation, knob for gripping, th = 2 mm
K1 artist knife
from 5,90 €
Contains: Handle and 5 K1 blades, Material: Aluminium, Handle: Round aluminium handle; knurled grip zone, Length handle: 115 mm
12 Variants
Round punch
from 3,90 €
Material: Steel C 45, Cutting hardness: HV 480 bis 558 kp/mm2 (HRC 47-52), Surface: milled finish; shank machined, lacquered, Standard: DIN 7200 Form B
2 Variants
Aluminium cutting ruler with steel edge, thin
from 21,90 €
material: anodised aluminium, Steel edge: steel edge for cutting or ink drawing/aluminium bevelled edge with imprinted mm graduation, equipment: with hanging hole and anti-slip reverse side (rubber)
Snap-off standard blades for 18 mm cutter
from 2,40 €
Packing: in translucent plastic case
Ecobra metal cutter, for 9 mm blades, auto-stop
from 4,70 €
Material: full metal housing, steel blade, Colour: silver, Attributes: metal cutter guide, notched slider, auto lock, Configuration: with hole for hanging, clip and breakoff device
Art knife cutter set
from 9,90 €
round aluminium handle with knurled grip zone, 6 different blades
2 Variants
Dahle Professional paper scissors
from 27,50 €
Blade material: stainless steel, hardened, Handle material: ABS plastic, impact resistant and colourfast, Versions: for righthanders, Cutting blades connection: screw joint with nylon retainer
Art knife with roll preventer
from 3,90 €
round plastic barrel with roll preventer (hexagon ring on barrel end), light-alloy internal mechanism, ribbed light-alloy locking piece, includes protective cap and one replacement blade in a plastic container
NT A 300 RP utility knife for 9 mm blades with auto lock
from 5,90 €
Material: Plastic housing; metal guide bar, Dimensions: 147 mm x 18 mm x 11 mm, Weight: 23 g, Color: Beige
2 Variants
Ulmer steel cutting ruler with facing
from 28,40 €
chrome-nickel steel, rust-free, with engraved mm scale, has knob for easy handling, hanging hole, thickness = 3 mm and width = 40 mm (for the 300 and 500 mm long versions); th = 4 mm and w = 50 mm (for the l = 1000...
Altera rotary cutter for left and righthanders
from 12,90 €
Material Handle: plastic, Material Blade: alloyed steel, Total length: 190 mm, Blade diameter: 45 mm
Bookbinding needle
from 0,30 €
nickel-plated
Stanley interlock cutter, with 18 mm blades
from 12,90 €
cast steel handle painted silver-grey, notched feeder, blade can be located in position by means of a set wheel
Olfa Cutter NOL-1 for 18 mm blades
from 11,90 €
yellow soft-grip plastic handle (anti-slip), notched feeder, positioning lock screw, blade in metal guide
Olfa Excel Black snap-off blades for 18 mm cutter
from 7,90 €
come in black plastic case, made with tool steel (highest quality)
2 Variants
Blades for stainless steel art knife holder
from 9,50 €
Olfa cutter No. 300 for 9 mm blades
from 7,90 €
yellow plastic handle, notched feeder, positioning lock screw, blade in metal guide
2 Variants
Rivet fastener, nickel-plated
from 0,75 €
steel, silver, glossy, 2-piece (top and bottom pieces), ø shaft 4.0 mm, ø head 9.0 mm, given length is the distance between the heads
4 Variants
Magnetic disk, neodymium, self-adhesive
from 4,90 €
neodymium iron boron (NdFeB), nickel-plated, matte, extreme adherence strength (10 to 15 times stronger than normal ferrite magnets of the same size), direction of the magnetization is through the height (axial), for...
Cutter for 18 mm blades with screw-lock
from 4,50 €
plastic handle with cushioned grip, notched feeder, positioning lock screw, blade in metal guide, snap-off aid
Olfa SVR-2 utility knife, 9 mm blades
from 9,90 €
Body: stainless steel handle and clip, Stepped feed: with Auto-Stop, Package contents: cutter with blade, 2 replacement blades, Packaging: blister pack
Ecobra Compass circle cutter C-101
from 10,90 €
red and black plastic, printed scale for radius and diameter, blade holder, includes protective cap for blade and needle and a slip-proof disc used for avoiding punctures in the middle of a disc cut-out, for circles...
NT BD 100 pointed 9 mm replacement blades
from 2,50 €
Width: 9 mm, Thickness: 0.4 mm, Angle: 30°
2 Variants
Single hole punch
from 1,95 €
steel, nickel-plated, has recepticle for the punch chads, punch capability is approx. 6 sheets of 80 g paper
Olfa snap-off blades for 9 mm cutter
from 3,90 €
come in yellow plastic case, made from tool steel (highest quality)
Stanley interlock cutter, with 9 mm blades
from 9,90 €
cast steel handle painted silver-grey, notched feeder, blade can be located in position by means of a set wheel
Art knife K1 (Xacto)
from 3,90 €
round aluminium handle, knurled grip zone, includes protective cap
view more articles
✖
Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies. More information
Welcome to Modulor
WITH or WITHOUT VAT?
As a business customer, see net prices - or as an individual customer, see all prices including sales tax.
