material: synthetic resin dispersion glue for paperboard, cardboard and glue binding work, End state: transparent when cured
2 Variants
Plastic glue
from 3,90 €
Ruderer L530 bzw. Technicoll 8008, toluol-free, transparent, colourless
3 Variants
Ponal Express
from 6,90 €
material: fast setting water-based wood glue (white glue), Use: 150 g/m², application pressure must be at least 15 N/cm² (approx. 1.5 kg/cm²), at 20 °C leave open maximum 10 minutes
3M Photo Mount spray adhesive
from 13,90 €
Basis: synthetic elastomer-based, Use: for permanent bonding
3M Spray Mount spray adhesive
from 14,90 €
Basis: synthetic elastomer-based, Use: for removable bondings
3 Variants
Tesa all-purpose glue
from 3,10 €
contains solvent, transparent, yellowish, waterproof, aging-resistant, rubs off of the skin
material: synthetic resin dispersion adhesive for cardboard and paperboard, End state: translucent when set
2 Variants
Aerodecor spray adhesive
from 4,20 €
material: all-purpose spray adhesive
Planatol bookbinding glue Elasta N
from 19,90 €
half glue/half synthetic resin dispersion adhesive for paper and cardboard, solvent-free, pH value approx. 7, translucent when set, hard, limited extendability, water soluble
3 Variants
Pritt glue stick
from 1,30 €
solvent-free, translucent, white, washes out cold, for permanent bonding of paper
Weicon minute epoxy
from 8,90 €
two component epoxy resin adhesive, without fillers, viscous, transparent, working life: 3 - 4 minutes, mixing ratio 1:1, temperature resistant from -50 to +80 °C
Ponal
from 7,90 €
water-based wood glue (white glue), solvent-free, at 20 °C leave open maximum 15 minutes, translucent when set, short term water resistant (D2), uses approx. 150 g/m², application pressure must be at least 15...
blue plastic housing with storage clip, electronically regulated, mechanical feeder, for use with ethylene vinyl acetate copolymer (EVA) based hot-melt sticks ø 11 mm up to 250 mm in length
power supply: 100 -...
2 Variants
Steinel standard hot-melt glue sticks Ultra Power
from 7,00 €
ø 11 mm, ethylene vinyl acetate copolymer (EVA) based hot melt adhesive, translucent, very high strength
Uhu plus endfest
from 12,90 €
two component epoxy resin adhesive, resin (binder) is translucent white (18 g), hardener is honey-coloured (15 g); working life: 90 minutes; maximum bond after 12 hour; variable mixing ratio, temperature resistant...
Weicon adhesive spray for detachable joints
from 14,40 €
for detachable joints; adhesive based on synthetic elastomers (rubber), colourless, CANNOT be used on polystyrene foam, open time (working time) is 60 minutes maximum
3M Creativ Mount spray adhesive
from 20,90 €
for sticky bonding (Post-it technology), acrylate polymer-based, colourless, UV resistant
Craftwork paste glue, methyl cellulose
from 3,40 €
pure methyl cellulose, without preservatives, transparent when set, water soluble, for papier-mâché and the bonding of paper and cardboard, pH value approx. 6 -7, makes approx. 2 l paste
Photo Patch, photo transfer medium
from 7,50 €
Application: transfer photos onto different substrates, Material: acrylate-base, Attributes: lightfast, odour-free, resists yellowing, Substrates: for wood, metal, glas, porcelain, ceramic, stretch frames and cloth (hand wash!)
contact high-strength adhesive, contains solvent, transparent, temperature resistant from –40 to +70 °C, water resistant, plasticizer resistant, flexible
Weicon adhesive spray, strong
from 14,40 €
for permanent joints; adhesive based on synthetic elastomers (rubber), cream coloured, limited use on polystyrene foam possible, open time (working time) is 30 minutes maximum
2 Variants
Steinel standard hot-melt glue sticks Cristal
from 6,80 €
ø 11 mm, ethylene vinyl acetate copolymer (EVA) based hot melt adhesive, transparent, normal strength, low-drip
Aka wallpaper paste
from 2,90 €
carboxymethylcellulose/starch ethyl oxide, transparent when set, water soluble, for papier-mâché and the bonding of paper and cardboard, pH value approx. 8, makes approx. 5 - 8 l paste
Pattex hot glue sticks
from 8,90 €
11 mm diameter, hot melt EVA (ethylene-vinyl acetate) glue, transparent, normal strength, low drip tendency
view more articles
✖
Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies. More information
Welcome to Modulor
WITH or WITHOUT VAT?
As a business customer, see net prices - or as an individual customer, see all prices including sales tax.
