very low viscosity (easy to pour)

elastic

low-odour

hardened material is colourless-transparent

toxicologically safe

non-hazardous

Location in StoreEGI11A
Article No.3004407
Materialtwo-component polyurethane casting resin
Colourcolourless transparent when cured
Shore hardnesssoft (ca. Sh-A 40 - 70)
Mixing ratioresin to hardener ca. 1.5-2.5 to 1
Working life25 - 30 minutes
Demoulding time120 minutes at 20°C
Temperature resistanceca. 100°C
Shelf life12 months in closed original container at 15 - 30°C

The PUR casting resin is something very special: it is extremely soft and elastic while also being colourless and highly transparent. Because it contains UV stabilizers it can be exposed to the sun for long periods of time without yellowing. Its Shore hardness and elasticity can be varied by adjusting the mixing ratios. When less hardener is used, very soft and elastic pieces will be created. These will have good adherence properties by virtue of being made up of thin layers and having a very smooth, even surface which will adhere well to other smooth surfaces like, for example, glass.

This casting compound is therefore great for making crystal clear shaped pieces (see. Bumpons), which can be cast to a wall thickness of 20 mm. In addition, this material can be used as a soft and transparent coating.

Both components are predominantly made up of sustainable raw materials. They consist of olive biopolyols and caprolactones as well as small amounts of isocyanate. The components, which are pretty much odour-free, are therefore non-toxic (safety label not required). The 1770/330 is easy to work with - when making a mixture, it should be noted that the hardener should be measured out first and the resin then weighed accordingly and subsequently mixed into the hardener.

Dyes suitable for use with PUR resins can be used to colour the 1770/330. In doing this, the dye must be mixed into the resin component (up to 3% proportion by weight of the resin) because the hardener is the component containing the isocyanate, which reacts more sensitively to the addition of other substances.

In order to produce cast pieces that are free of bubbles, the resin should be de-aerated in a vacuum - especially if it is not being dyed. If no vacuum device is available, it is recommended that you at least use the pot life period to de-aerate the mixture. This will, however, not really produce a crystal clear, bubble-free result - but will get somewhat closer to that anyway! After demoulding, the cast piece should be tempered at 80 °C for between 2 and 8 hours. Once cured, the resin is scratch resistant and lends itself to being machined , sanded and polished.

Achtung, (VOC-Gehalt = 0,0 %), Hexamethylen-1,6-diisocyanat (Gefährliche Verunreinigungen) = < 0,3 %, Hexamethylendiisocyanat-Oligomere, biuret = 100 %, Akute Toxizität (inhalativ), Kategorie 4, Sensibilisierung der Haut, Kategorie 1, Spezifische Zielorgan-Toxizität (einmalige Exposition), Kategorie 3, Atemwegsreizung

Hazard warnings
  • H317: May cause an allergic skin reaction.
  • H332: Harmful if inhaled.
  • H335: May cause respiratory irritation.
Safety instructions
  • P261: Avoid breathing dust / fume / gas / mist / vapours / spray.
  • P280: Wear protective gloves / protective clothing / eye protection / face protection.
  • P284: [In case of inadequate ventilation] wear respiratory protection.
  • P302+P352: IF ON SKIN: Wash with plenty of water / …
  • P304: IF INHALED:
  • P333+P313: If skin irritation or rash occurs: Get medical advice / attention.
  • P403+P233: Store in a well-ventilated place. Keep container tightly closed.
  • P501: Dispose of contents / container to …
Downloads

Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 79 €.

5,95 € shipping costs, if order value is less than 79 € (DE)

2,95 € for pick-up at the store in Berlin, if order value is less than 79 €

 

Express and forwarding shipping

From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.

From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .

 

Especially for Berlin

From 34.90 € courier shipping for standard and forwarding goods.

  • Free returns for standard shipping within Germany
  • Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
  • You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany

 

Excluded from returns

Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.

Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.

Note

Contains diisocyanates! As of August 24, 2023, appropriate training must be provided prior to industrial or commercial use.

Biothan / Biodur 1770/330 casting resin, soft

Biothan PUR resin 1770, 750 g in PE container
(99,87 €/kg)incl. VAT / excl. shipping
74,90 €
(99,87 €/kg)
incl. VAT / excl. shipping
Standard shipping free from 79€ (DE)Free 30-day return (DE)
Only 3 articles left
Type:
Variants:
Biothan / Biodur 1770/330 casting resin, soft Biothan PUR resin 1770, 750 g in PE container
Biothan PUR resin 1770, 750 g in PE container
74,90 €
Biothan / Biodur 1770/330 casting resin, soft Biodur PUR hardener 330, 500 g in PE container
Biodur PUR hardener 330, 500 g in PE container
44,90 €