For eye-catching logo plots, lettering and slogans on glass
Appears in different colors (dichroic) - depending on the viewing angle
Colored-translucent - surface like etched glass
Solvent-free adhesive - can be removed even years later
For bonding to smooth surfaces
| Article No. | |
|---|---|
| Material | Polyester/PVC composite |
| Adhesive | Polyacrylate adhesive, semi-transparent, approx. 25 g/m² |
| Thickness | 0.12 mm |
| Backing material/cover | siliconized PET, 110 g/m² |
| Outdoor durability | 3 years |
| Opacity | translucent/opaque |
| Colors | magenta/yellow (Nova), pink/light blue (Luna) |
| Surface finish | matt |
| Temperature range during bonding | from 15 °C |
| Temperature range when bonded | -30 °C to +80 °C |
| Adhesive strength immediately | ≈ 9 N/25 mm |
| Adhesive strength after 72 hours | ≈ 14.5 N/25 mm |
| Substrates | Smooth surfaces such as glass, metal, plastic; not for curved/elastic surfaces |
| Application | generally dry; wet bonding possible, water must be completely squeegeed out |
| Plottability | Tangential knife 60°; recommended minimum versal height 40 mm, web width 10 mm |
With the translucent Aslan ColourShift Etched SE 77, you can design glass surfaces in particular in such a way that a visibly changing, iridescent color impression appears depending on the viewing angle and incidence of light. The visible side has a noble matt etched glass look; the adhesive side shows the clear dichroic effect. The etched glass side can be printed with standard printing processes (solvent, eco-solvent, latex, UV-curing inks and screen printing inks) for printed, individual motifs.
Dichroic films appear in different colors depending on the viewing angle. So if you walk past a shop window covered with the iridescent adhesive film, for example, you will see the same surface in different colors. This is quite a spectacular effect and is therefore ideal for anything that needs to be an eye-catcher. For example, you can use a cutting plotter (with a tangential blade at 60°) to plot motifs or lettering from the film and apply them to the surface of your choice.
The important thing to remember with polyester film is that it should only be applied to smooth, firm and even surfaces and that it is better to apply it dry because the material is not particularly breathable. To put it more clearly: if you want to apply it wet, you should make sure that you carefully wipe out the water with a squeegee after positioning. This works particularly well on very smooth surfaces such as glass. However, any water remaining between the film and the glass hardly evaporates at all because it can hardly diffuse through the film. So you have to work really carefully. Water with a transfer liquid works better than pure water. Acrylic glass should only be covered if it is a tempered material. Untempered acrylic glass tends to outgas when the ambient temperature changes (when heated). As the film is not open to diffusion, gas bubbles will form under the film in this case.
The translucent film is available in two color variants. Aslan calls these variants "Luna" and "Nova". This refers to the color changes from pink to blue (Luna) and from yellow to magenta (Nova). When applying the films, make sure that you apply them side by side in the same direction. Otherwise the color changes will not be homogeneous or parallel when viewed. The running directions should also not be applied at right angles to each other, as this would severely disrupt the beautiful visual effect of the film.
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.
For eye-catching logo plots, lettering and slogans on glass
Appears in different colors (dichroic) - depending on the viewing angle
Colored-translucent - surface like etched glass
Solvent-free adhesive - can be removed even years later
For bonding to smooth surfaces
| Article No. | |
|---|---|
| Material | Polyester/PVC composite |
| Adhesive | Polyacrylate adhesive, semi-transparent, approx. 25 g/m² |
| Thickness | 0.12 mm |
| Backing material/cover | siliconized PET, 110 g/m² |
| Outdoor durability | 3 years |
| Opacity | translucent/opaque |
| Colors | magenta/yellow (Nova), pink/light blue (Luna) |
| Surface finish | matt |
| Temperature range during bonding | from 15 °C |
| Temperature range when bonded | -30 °C to +80 °C |
| Adhesive strength immediately | ≈ 9 N/25 mm |
| Adhesive strength after 72 hours | ≈ 14.5 N/25 mm |
| Substrates | Smooth surfaces such as glass, metal, plastic; not for curved/elastic surfaces |
| Application | generally dry; wet bonding possible, water must be completely squeegeed out |
| Plottability | Tangential knife 60°; recommended minimum versal height 40 mm, web width 10 mm |
With the translucent Aslan ColourShift Etched SE 77, you can design glass surfaces in particular in such a way that a visibly changing, iridescent color impression appears depending on the viewing angle and incidence of light. The visible side has a noble matt etched glass look; the adhesive side shows the clear dichroic effect. The etched glass side can be printed with standard printing processes (solvent, eco-solvent, latex, UV-curing inks and screen printing inks) for printed, individual motifs.
Dichroic films appear in different colors depending on the viewing angle. So if you walk past a shop window covered with the iridescent adhesive film, for example, you will see the same surface in different colors. This is quite a spectacular effect and is therefore ideal for anything that needs to be an eye-catcher. For example, you can use a cutting plotter (with a tangential blade at 60°) to plot motifs or lettering from the film and apply them to the surface of your choice.
The important thing to remember with polyester film is that it should only be applied to smooth, firm and even surfaces and that it is better to apply it dry because the material is not particularly breathable. To put it more clearly: if you want to apply it wet, you should make sure that you carefully wipe out the water with a squeegee after positioning. This works particularly well on very smooth surfaces such as glass. However, any water remaining between the film and the glass hardly evaporates at all because it can hardly diffuse through the film. So you have to work really carefully. Water with a transfer liquid works better than pure water. Acrylic glass should only be covered if it is a tempered material. Untempered acrylic glass tends to outgas when the ambient temperature changes (when heated). As the film is not open to diffusion, gas bubbles will form under the film in this case.
The translucent film is available in two color variants. Aslan calls these variants "Luna" and "Nova". This refers to the color changes from pink to blue (Luna) and from yellow to magenta (Nova). When applying the films, make sure that you apply them side by side in the same direction. Otherwise the color changes will not be homogeneous or parallel when viewed. The running directions should also not be applied at right angles to each other, as this would severely disrupt the beautiful visual effect of the film.
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.