Plate core: fire pore model building board from extruded polystyrene foam, Surface: rough (not sheared), Characteristics: extremely pressure-resistant (high density), certified per EN 13501-1: Euroclass E, conforms to DIN 4102-1: building material c ...
12 Variants
Kapa line, cardboard clad, white
from 3,90 €
Sheet core: PUR rigid foam, light, Protective Film: Chromo-replacement cardboard, matt on both sides, pigmented white, Color: white, Brand: Kapa
20 Variants
Styrofoam light blue, trimmed
from 1,90 €
Plate core: fine pore insulation panel made from extruded polystyrene foam, Surface: smooth (sheared), Characteristics: extremely pressure-resistant (high density), certified per EN 13501-1, conforms to DIN 4102: building material class B1 (flame ...
2 Variants
Mould making plasticine
from 6,90 €
Scope: for working in conjunction with interlinking silicone additives (non-inhibiting)
16 Variants
Acrylic glass XT round rod, colourless
from 1,70 €
transparent, colourless, glossy
13 Variants
Beech round rod
from 0,60 €
Material: beechwood
2 Variants
Polystyrene rigid foam, silver-grey, untrimmed
from 8,50 €
Plate core: fire pore model building board from extruded polystyrene foam, Surface: glossy (untrimmed), Characteristics: extremely pressure-resistant (high density), certified per EN 13501-1: Euroclass E, conforms to DIN 4102-1: building material c ...
2 Variants
Styrofoam, light blue, untrimmed
from 5,10 €
Plate core: medium pore insulating block made out of extruded polystyrene foam, Surface: smooth, semi-gloss surface, Characteristics: compression resistant, certified per EN 13501-1, conforms to DIN 4102: construction material class B1 (flame resistant)
11 Variants
Standard plasticine, coloured
from 3,70 €
product: handicraft plasticine
5 Variants
SikaBlock PUR M600 modeling board
from 8,90 €
Material: microcellular, polyurethane-based model making material, Colour: light brown, Shore hardness: Shore 58 D (= 100 Shore A), very hard (ISO 868), Density: 600 kg/m³ (ISO 845)
Panel core: White polystyrene hard foam core, Cover: Cover White Stadurlon plastic panel (PVC-free), satin finish on both sides, with protective film on both sides
material: extremely fine pored polyurethane-based light moulding material, Density: 450 kg/m³
4 Variants
SikaBlock PUR rigid modelling foam M150
from 24,90 €
very fine pored polyurethane-based rigid foam for model making, light yellow or light green, density: 150 kg/m³; compressive strength: 1,6 MPa (ISO 604), modulus of elasticity: 65 MPa (ISO 178), linear coefficient...
Super Sculpey Firm
from 14,90 €
product: oven-curing modelling compound (15 min. at 130 °C)
3 Variants
Polystyrene hard foam, white, trimmed
from 3,90 €
Board core: fine-pored insulation board made of extruded polystyrene hard foam, Surface: smooth (trimmed), Properties: very pressure-resistant (high density), Edges: straight
5 Variants
Beechwood cube, raw
from 0,30 €
sanded
6 Variants
Balsa scantling
from 2,90 €
air-dryed, all sides fine sanded
Original Sculpey, white
from 13,50 €
oven-curing modelling compound (15 min. at 130 °C), very pliable, very crack resistant, miscible
6 Variants
SikaBlock modelling/tooling board M1000
from 19,90 €
material: homogeneous polyurethane-based modelling material, Density: 1,000 kg/m³, Modus of elasticity: 1,800 MPa (ISO 178)
3 Variants
Modelling plaster
from 2,50 €
white, comes in paper sack with foil insert
2 Variants
Kapa line box
from 8,90 €
Material: light-coloured PUR rigid foam core, Covering: both side of board covered with matte white pigmented chromo board
4 Variants
Acrystal Prima acrylic resin
from 25,90 €
material: two component water-based acrylic resin system, Range of application: for casting, laminating and coating, for interior as well as protected exterior spaces
7 Variants
Rigid-PVC round rod, opaque, coloured
from 1,70 €
glossy
2 Variants
Acrylic XT glass cube, transparent
from 4,90 €
colourless, polished to a gloss, somewhat rounded edges
3 Variants
Model'Art animation plasticine, coloured
from 31,50 €
high quality thermoplastic “animation clay, thermostable up to bis 55 °C , water-resistant, lightfast, extra fine texture, conforms to the EU toy guidelines (DIN EN 71), comes in foil package
Gedeo resin plaster
from 10,90 €
extra hard, high-quality alpha plaster, synthetic resin bonded, bright white, fine grained, non-clumping, mixing ratio of powder to water is 3:1; setting time is 8 – 15 minutes, demoulding time is 30 minutes,...
Panel core: Black polystyrene hard foam core, Cover: Black Stadurlon plastic panel (PVC-free), satin finish on both sides, with protective film on both sides
Gedeo hard plaster
from 8,50 €
a harder and higher quality alpha plaster for artistic castings, course grain, does not clump; mixing ratio of powder to water is 2.5:1, setting time is 8 – 15 minutes, demoulding time is 30 minutes, takes...
2 Variants
Protopaper
from 2,95 €
material: 150 g/m²
view more articles
✖
Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies. More information
Welcome to Modulor
WITH or WITHOUT VAT?
As a business customer, see net prices - or as an individual customer, see all prices including sales tax.
