Get your 20% 20% May Discount on selected products
Scorri verso l'alto
Categorie
Ricercare
      Categorie
      Prodotti
      Sto cercando i prodotti...
      La ricerca di »« non ha prodotto risultati.

      Stampi

      Materiale

      Applicazione

      Gruppo colore

      Marchio

      Prezzo

      122 Articolo   /   347 Varianti
      vista
      Classificazione: Rilevanza
      • Rilevanza
      • Topseller
      • Prezzo crescente
      • Prezzo decrescente
      • Plastilina standard, colorata
        11 Varianti
        Plastilina standard, colorata
        da 3,80 €
        product: handicraft plasticine
      • Granulato termoplastico per modellare Modulor
        3 Varianti
        Granulato termoplastico per modellare Modulor
        da 2,90 €
        Material: granules, polyurethane elastomer, Colour: white, Grain size: approx. 3 mm, Attributes: melting point ca. 60 °C
      • Plastilina per modellare
        2 Varianti
        Plastilina per modellare
        da 7,10 €
        Scope: for working in conjunction with interlinking silicone additives (non-inhibiting)
      • Resina acrilica  laminatura/stampiAcrylstal Prima
        4 Varianti
        Resina acrilica laminatura/stampiAcrylstal Prima
        da 23,90 €
        material: two component water-based acrylic resin system, Range of application: for casting, laminating and coating, for interior as well as protected exterior spaces
      • Resina rapida poliuretano per stampi PUR G26
        4 Varianti
        Resina rapida poliuretano per stampi PUR G26
        da 22,90 €
        Material: 2 component quick casting resin, End state: cures to an opaque beige-brown colour, Density: (at room temperature) approx. 1.1 g/cm³
      • Worbla´s Finest Art modeling material sheet
        5 Varianti
        Worbla´s Finest Art modeling material sheet
        da 5,00 €
        cellulose-polyester composite, light brown and opaque, th = 1 mm, ca. 1100 g/m², can be thermoplasically shaped any number of times, one side is coated with a thermoplastic adhesive (smooth, semi-matte surface)...
      • Resina cristallina Gedeo, trasparente
        3 Varianti
        Resina cristallina Gedeo, trasparente
        da 13,50 €
        product: 2-component epoxy resin casting compound, Contents: 1 pair protective gloves, 2 measuring beakers, 2 stirring spatulas
      • Formcard meltable bio-plastic
        5 Varianti
        Formcard meltable bio-plastic
        da 6,90 €
        Material: thermoplastic bioplastic, Dimensions: card size: 2.5 x 55 x 85 mm
      • Coloranti per resine sintetiche
        7 Varianti
        Coloranti per resine sintetiche
        da 5,30 €
        Product description: highly pigmented, intense pigment pastes that can be mixed together, Use: for colouring polyurethane, polyester and epoxy resins, Storing: shelf-life when properly stored: 12 months
      • Argilla Mars Clay standard, marrone
         
        Argilla Mars Clay standard, marrone
        da 24,90 €
        material: non-drying modelling clay made from wax, fillers and pigments, Handling: can be worked with from 15 C° to 25 °C, Pre-heating temperature: 55 °C to 60 °C
      • Gomma siliconica autoindurente Sugru
        4 Varianti
        Gomma siliconica autoindurente Sugru
        da 8,50 €
        material: air curing, silicone elastomer-based Formerol modelling clay
      • TFC alginate impression compound, fast
        3 Varianti
        TFC alginate impression compound, fast
        da 14,90 €
        Material: Irreversible hardening elastic impression material (powder), Color: blue, Mixing ratio: 2:1 (water:alginate – firm) or 3:1 (medium consistency), Mixing time at 23°C: 30–40 sec.
      • Varaform heavy
        2 Varianti
        Varaform heavy
        da 16,20 €
        cotton mesh material with permeable coating, square mesh (app. 4.0 x 4.0), spacing between holes app. 2.5, 18% cotton, 82% thermoplastic synthetic resin, heating time: 1 to 2 minutes, working life: 2 to 3 minutes,...
      • Resina poliestere per stampi GTS, vetro chiaro
        2 Varianti
        Resina poliestere per stampi GTS, vetro chiaro
        da 19,90 €
        Contents: 2 component casting resin from unsaturated ortophtal acid and polyester resin and MEKP hardener, includes a mixing bowl for sma ..., End state: when cured is transparent and colourless, density (at room temperature) approx. 1.2 g/cm³
      • Resina per stampi/plasmare PUR U1404
        5 Varianti
        Resina per stampi/plasmare PUR U1404
        da 29,90 €
        material: 2 component casting resin, End state: material is reddish and transparent when cured, Working life: 25 to 100 minutes, Density: (at room temperature) approx. 1.05 g/cm³
      • Rinforzatore tessile Pretex
        2 Varianti
        Rinforzatore tessile Pretex
        da 22,90 €
        air-drying, one-component water-based stiffener
      • Creastone concrete casting compound
        2 Varianti
        Creastone concrete casting compound
        da 6,60 €
        Mixing ratio: 10:1, 100 gram powder : makes 50 ml casting compound, Curing time: 2-3 days, Can be painted: 1-2 days after demoulding
      • Epoxy casting resin, water clear, set
         
        Epoxy casting resin, water clear, set
        da 43,90 €
        cold-curing, two-component casting resin consisting of bisphenol A-epichlorohydrin and epoxy hardener with polyoxyalkyleneamine, unfilled, hard, very low viscosity (very pourable), cured material is colourless and...
      • Super Sculpey
         
        Super Sculpey
        da 13,80 €
        oven-curing modelling compound (15 min. at 130 °C), very pliable, very crack resistant
      • Resina rapida poliuretano per stampi PUR G 27
        4 Varianti
        Resina rapida poliuretano per stampi PUR G 27
        da 22,90 €
        Material: 2 component quick casting resin, End state: cures to an opaque beige colour, density (at room temperature) approx. 1.1 g/cm³, Working life: approx. 2 minutes (for 200 g)
      • Super Sculpey Living Doll
        3 Varianti
        Super Sculpey Living Doll
        da 14,80 €
        product: oven-curing modelling compound (15 min. at 130 °C)
      • Resina poliestere per stampi R & G, vetro chiaro
        2 Varianti
        Resina poliestere per stampi R & G, vetro chiaro
        da 14,90 €
        product: 2 component casting resin from unsaturated ortophtal acid polyester resin and MEKP hardener, Cured material: colourless and transparent, Density (at room temperature): approx. 1.22 g/cm³,
      • Varaform Gaze
        2 Varianti
        Varaform Gaze
        da 15,80 €
        Product description: translucent, closed surface coated cotton mesh, 18% cotton, 82% thermoplastic synthetic resin, heating time: 1-2 min, processing time: 2-3 min
      • Worbla's Transpa Art modelling sheets
        5 Varianti
        Worbla's Transpa Art modelling sheets
        da 5,00 €
        Product description: thermoplastic polyester, Colour: colourless, transparent, Thickness: ca. 0,8 mm, Density: ca. 1000 g/m²
      • Super Sculpey Firm
         
        Super Sculpey Firm
        da 16,60 €
        product: oven-curing modelling compound (15 min. at 130 °C)
      • Biothan/Biodur 1785/330 casting resin, hard
        2 Varianti
        Biothan/Biodur 1785/330 casting resin, hard
        da 26,90 €
        Material: two-component polyurethane casting resin, Colour: colourless transparent when cured , Shore hardness: soft (ca. Sh-A 40 - 70), Mixing ratio: resin to hardener ca. 1.5-2.5 to 1
      • Pasta per modellare Keramiplast
         
        Pasta per modellare Keramiplast
        da 5,70 €
        air-dried, comes in air-tight PE foil
      • Biothan / Biodur 1770/330 casting resin, soft
        2 Varianti
        Biothan / Biodur 1770/330 casting resin, soft
        da 44,90 €
        Material: two-component polyurethane casting resin, Colour: colourless transparent when cured , Shore hardness: soft (ca. Sh-A 40 - 70), Mixing ratio: resin to hardener ca. 1.5-2.5 to 1
      • TFC silicone rubber type 1 low-viscosity, set
        4 Varianti
        TFC silicone rubber type 1 low-viscosity, set
        da 24,90 €
        Material: Silicone rubber, Shore hardness: A 20 , Color: mint green, Mixing ratio: 1:1 by weight
      • Gesso per modellare
        3 Varianti
        Gesso per modellare
        da 2,20 €
        white, comes in paper sack with foil insert
      • Set arnesi di modellazione n°1
         
        Set arnesi di modellazione n°1
        da 11,90 €
        Product : birch modelling sticks, Material: birch, sanded and polished, Length: 150 mm
      • Set arnesi di precisione n° 2
         
        Set arnesi di precisione n° 2
        da 23,70 €
        steel, chromed or nickel-plated, wooden handle, l = 140 - 165 mm
      • Argilla TecClay leggera, marrone chiaro
         
        Argilla TecClay leggera, marrone chiaro
        da 17,90 €
        product: non-drying modelling clay, material: with binding agents (microwax among others), fillers (zinc stearate, magnesium and micro hollow globules among others) and dyes
      • iFixit Metal Spudger Set
         
        iFixit Metal Spudger Set
        da 11,90 €
        Material: chromed stainless steel, Length: 155 - 185 mm
      • Resina cristallina Gedeo, trasparente, colorata
        5 Varianti
        Resina cristallina Gedeo, trasparente, colorata
        da 14,80 €
        2-component epoxy resin casting material, transparent, colourless, waterproof and UV resistant, mixing ratio of resin to water is 2:1, curing time: 12 hours for the surface, 24 hours for the core, shelf life when...
      • Agente distaccante idrosolubile per stampi,b.visc.
         
        Agente distaccante idrosolubile per stampi,b.visc.
        da 4,90 €
        dyed to a reddish colour, polyvinyl alcohol-based; resistant to numerous solvents, styrol and benzene; ready-to-use, apply with cloth or brush, flash-off time: 15-20 minutes
      Questa è Modulor
      Modulor Newsletter
      Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information