Perfect for replicating and molding on upright objects or vertical surfaces
Kneading silicone: Easy mixing of components (1:1) by kneading
Particularly dimensionally stable
High design accuracy
Physiologically safe
| Article No. | |
|---|---|
| Material | Addition-curing kneading silicone |
| Shore hardness | A 25 |
| Color | white, (component A) and green (component B) |
| Mixing ratio | 1:1 by weight |
| Density at 23°C | 1.9 g/cm |
| Mixing time at 23°C | approx. 30–45 sec. by hand |
| Processing time at 23°C | 1–1,5 min. |
| Curing time at 23°C | 15–25 min. |
| Dimensional changes after 24 h | < 0,2% |
TFC silicone rubber Type 8 is an addition-crosslinking kneading silicone that allows precise molding with high drawing precision. Due to its low shrinkage, it is extremely dimension-stable. The material does not adhere, is physiologically harmless and has excellent mechanical properties. The Type 8 kneading silicone is therefore perfect for duplicating, e.g. in modeling and mold making, as a form and design mass, as well as for shaping on vertical objects or surfaces.
TFC silicone Type 8 can be used to produce both single and multi-part molds. Impressions can be made of original models made of wood, glass, metal, plastic, wax, and ceramic casting compounds. All water-soluble or solvent-containing casting materials can be cast into the molds produced.
The water-soluble casting compounds include, for example, relief casting compounds such as Stewalin, Plastalin Super, Keraflott or gypsum, Keramin, Alabit, modeling and building plaster, cast clay, cement, concrete, etc. For solvent-containing casting compounds, e.g. resin and epoxy resin, the mold should be pretreated with a release agent, since casting resins can lead to embrittlement of the mold after repeated casting. Seed casting compounds (soap-glycerin), for the production of soap or waxes for the production of candles, can also easily be brought into the molds.
This is how it works
For the processing of TFC silicone Type 8, the two components, A (light green) and B (white), are intensively and rapidly kneaded for about 30 to 45 seconds to give a streak-free, homogeneous, and evenly light green mixture. For removal and mixing, please use vinyl gloves instead of latex as latex will lengthen (or even prevent) the setting time. When mixing with bare hands, the setting time may be shortened. The mixing, processing, and curing times are shortened at temperatures above 23 °C and extend at lower temperatures.
We have updated our product range. TFC silicone rubber Type 8 replaces Alpa Sil V 66 1:1.
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.
Perfect for replicating and molding on upright objects or vertical surfaces
Kneading silicone: Easy mixing of components (1:1) by kneading
Particularly dimensionally stable
High design accuracy
Physiologically safe
| Article No. | |
|---|---|
| Material | Addition-curing kneading silicone |
| Shore hardness | A 25 |
| Color | white, (component A) and green (component B) |
| Mixing ratio | 1:1 by weight |
| Density at 23°C | 1.9 g/cm |
| Mixing time at 23°C | approx. 30–45 sec. by hand |
| Processing time at 23°C | 1–1,5 min. |
| Curing time at 23°C | 15–25 min. |
| Dimensional changes after 24 h | < 0,2% |
TFC silicone rubber Type 8 is an addition-crosslinking kneading silicone that allows precise molding with high drawing precision. Due to its low shrinkage, it is extremely dimension-stable. The material does not adhere, is physiologically harmless and has excellent mechanical properties. The Type 8 kneading silicone is therefore perfect for duplicating, e.g. in modeling and mold making, as a form and design mass, as well as for shaping on vertical objects or surfaces.
TFC silicone Type 8 can be used to produce both single and multi-part molds. Impressions can be made of original models made of wood, glass, metal, plastic, wax, and ceramic casting compounds. All water-soluble or solvent-containing casting materials can be cast into the molds produced.
The water-soluble casting compounds include, for example, relief casting compounds such as Stewalin, Plastalin Super, Keraflott or gypsum, Keramin, Alabit, modeling and building plaster, cast clay, cement, concrete, etc. For solvent-containing casting compounds, e.g. resin and epoxy resin, the mold should be pretreated with a release agent, since casting resins can lead to embrittlement of the mold after repeated casting. Seed casting compounds (soap-glycerin), for the production of soap or waxes for the production of candles, can also easily be brought into the molds.
This is how it works
For the processing of TFC silicone Type 8, the two components, A (light green) and B (white), are intensively and rapidly kneaded for about 30 to 45 seconds to give a streak-free, homogeneous, and evenly light green mixture. For removal and mixing, please use vinyl gloves instead of latex as latex will lengthen (or even prevent) the setting time. When mixing with bare hands, the setting time may be shortened. The mixing, processing, and curing times are shortened at temperatures above 23 °C and extend at lower temperatures.
We have updated our product range. TFC silicone rubber Type 8 replaces Alpa Sil V 66 1:1.
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.