We have quite a lot going on. Therefore, we ask for your patience in responding to request. We will keep you up to date. Click for more info about the lockdown.
Characteristics: impact-resistant, Dimensions: usable dimensions=guaranteed minimum, Surface: One side: matte. Other side: shiny.
6 Variants
Polystyrene rigid foam, white, untrimmed
from 4,90 €
Plate core: fire pore model building board from extruded polystyrene foam, Surface: rough (not sheared), Characteristics: extremely pressure-resistant (high density), certified per EN 13501-1: Euroclass E, conforms to DIN 4102-1: building material c ...
20 Variants
Styrofoam light blue, trimmed
from 1,90 €
Plate core: fine pore insulation panel made from extruded polystyrene foam, Surface: smooth (sheared), Characteristics: extremely pressure-resistant (high density), certified per EN 13501-1, conforms to DIN 4102: building material class B1 (flame ...
10 Variants
Plastic boxes, transparent, rectangular
from 0,50 €
material: polystyrene, equipment: with lid, without European standard holes for hanging, Dimensions: given dimensions: outer l x w x h (inner dimensions are 2 - 3 mm smaller depending on box size)
2 Variants
Polystyrene rigid foam, silver-grey, untrimmed
from 8,50 €
Plate core: fire pore model building board from extruded polystyrene foam, Surface: glossy (untrimmed), Characteristics: extremely pressure-resistant (high density), certified per EN 13501-1: Euroclass E, conforms to DIN 4102-1: building material c ...
6 Variants
Polystyrene mirror, coloured, smooth
from 5,90 €
Front side: mirrored with protective film
11 Variants
Polystyrene sphere, transparent, hollow
from 0,70 €
material: polystyrene
2 Variants
Styrofoam, light blue, untrimmed
from 5,10 €
Plate core: medium pore insulating block made out of extruded polystyrene foam, Surface: smooth, semi-gloss surface, Characteristics: compression resistant, certified per EN 13501-1, conforms to DIN 4102: construction material class B1 (flame resistant)
7 Variants
Plastic boxes, transparent, square
from 0,80 €
material: polystyrene, equipment: with lid, without European standard holes for hanging, Dimensions: given dimensions: outer l x w x h (inner dimensions are 2 - 3 mm smaller depending on box size)
47 Variants
Polystyrene rectangular strips, long, white
from 1,30 €
matte, sawn
4 Variants
Hermoli detailed figures, unpainted, white, 1:100
from 6,90 €
polystyrene, semi-matte
5 Variants
Hermoli detail model figures, unpainted, white, 1:50
from 9,50 €
polystyrene, semi-matte
31 Variants
Polystyrene right-angled strips, short, white
from 6,80 €
matte, sawn
13 Variants
Polystyrene foam ball
from 1,80 €
material: polystyrene, medium-pored
4 Variants
Hermoli detailed figures, unpainted, white 1:200
from 6,90 €
polystyrene, semi-matte
2 Variants
Polystyrene black, matte
from 3,20 €
impact-resistant, black
9 Variants
Plastic containers, transparent, round
from 0,90 €
material: polystyrene, design: letters in ( ) see information text
8 Variants
Polystyrene round tube, white
from 2,10 €
white, matte, given dimensions: outer diameter x inner diameter
3 Variants
Polystyrene hard foam, white, trimmed
from 3,90 €
Board core: fine-pored insulation board made of extruded polystyrene hard foam, Surface: smooth (trimmed), Properties: very pressure-resistant (high density), Edges: straight
10 Variants
Polystyrene round strips, white
from 6,80 €
matte
4 Variants
Palaset P-09 document tray
from 12,90 €
closed on three sides, one side open and has a cut-out for gripping purposes, can be stacked vertically and offset, for DIN A4 documents, high quality injection moulded polystyrene, glossy, striation-free; given...
5 Variants
Palaset box of drawers, coloured
from 18,20 €
high quality polystyrol injection mould, glossy, striation-free, given dimensions: outer measurements (inner measurements are generally about 10 mm smaller), wall thickness = 5.0 mm, drawers have rounded recessed...
3 Variants
Palaset standing (magazine) file, coloured
from 13,50 €
high quality polystyrol injection mould, glossy, striation-free, given dimensions: outer measurements (inner measurements are about 10 mm smaller), wall thickness = 5.0 mm, designed by Ristomatti Ratia
28 Variants
Evergreen polystyrene textured sheet
from 12,90 €
polystyrene, one side smooth, white, matte, 150 x 300 mm, th = 1.0 mm, Tc = lengthwise
Preiser detailed-figures, unpainted, white, 1:100
from 44,90 €
material: polystyrene
3 Variants
Silhouette figures, white
from 2,20 €
material: polystyrene
5 Variants
Palaset plactic boxes, coloured, pen holder
from 5,50 €
high quality polystyrol injection mould, glossy, striation-free, without top, given dimensions: outer measurements l x w x h (inner measurements are generally about 10 mm smaller), wall thickness = 5.0 mm, designed...
3 Variants
Hermoli detail model figures, unpainted, white, 1:25
from 12,90 €
Material: Polystyrene, Scale: 1:25, Color: Unpainted, white, Contents: 6 pieces (standing), 4 pieces (sitting), or 4 x 6 pieces (standing)
12 Variants
Textured sheet, through-stamped, large
from 12,80 €
material: polystyrene, Strength: 0.5 mm
8 Variants
Polystyrene U-channel strips, white
from 6,90 €
white, matte, given dimensions: height x width x wall thickness
5 Variants
Palaset plactic boxes, coloured, mini-box P-04
from 8,80 €
high quality polystyrol injection mould, glossy, striation-free, without top, given dimensions: outer measurements l x w x h (inner measurements are generally about 10 mm smaller), wall thickness = 5.0 mm, designed...
Palaset plactic boxes, coloured, CD/DVD box
from 16,10 €
high quality polystyrol injection mould, glossy, striation-free, without top, given dimensions: outer measurements l x w x h (inner measurements are generally about 10 mm smaller), wall thickness = 5.0 mm, designed...
4 Variants
Step boards 34°, polystyrene, white
from 1,30 €
injection moulding, rise is approx. 34°
3 Variants
Fencing, polystyrene, white, horizontal
from 4,00 €
horizontal partitions, injection moulding, l = 170 mm
4 Variants
Chairs, white, 1:50
from 0,90 €
polystyrene, injection moulding
Palaset P-05 letter rack
from 6,30 €
five compartments, high quality polystyrene injection mould, glossy, striation-free, rounded corners; given dimensions are outer measurements (inner one are about 10 mm less), wall thickness is ca. 3.0 mm; design:...
view more articles
✖
Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies. More information
Welcome to Modulor
WITH or WITHOUT VAT?
As a business customer, see net prices - or as an individual customer, see all prices including sales tax.
