Repairing

ethyl cyanoacrylate adhesive, sets colourlessly, begins adhering after 5 - 60 seconds, hazard warning: Xi irritant

extremely strong permanent bond (0,3 N/cm), extremely tear resistant, weatherproof, temperature resistant from -10 °C to +80 °C, PE coated fabric carrier material (mesh 50), th = 0.31 mm; bonding agent is...

contains solvent, transparent, colourless, waterproof, fast drying, with separate fine injector, hazard warnings: Xi irritant, F highly flammable

transparent, colourless, for precise and fine gluing with a hollow needle, hazard warnings: Xi irritant, F highly flammable

half glue/half synthetic resin dispersion adhesive for paper and cardboard, solvent-free, pH value approx. 7, translucent when set, hard, limited extendability, water soluble

extremely strong permanent bond, extremely tear resistant, weatherproof, PE coated fabric carrier material (mesh 27), th = 0.18 mm; bonding agent is unvulcanized rubber

ethyl cyanoacrylate adhesive, sets colourlessly, begins adhering after 2 - 60 seconds, hazard warning: Xi irritant

two component epoxy resin adhesive, amber colour, working life: up to 5 minutes, mixture ratios 1:1, temperature resistant from -50 bis +60 °C, hazard warnings: Xi irritant, N dangerous for the environment

ethyl cyanoacrylate adhesive, sets colourlessly, begins adhering after approx. 25 - 100 seconds, hazard warning: Xi irritant

100% cotton, beige, impregnated with starch (stiffened), fabric construction of Ypsilon (single thread): warp 9.5 threads (Nm 60)/cm, weft 6.5 threads (Nm 60)/cm; fabric construction for Beta (2 threaded); warp 17.5...

contact adhesive, yellowish brown, contains solvent, temperature resistant from –40 to +110 °C, water resistant, flexible, hazard warning: Xi (= irritant), F (= highly flammable), N (= dangerous for the environment)

synthetic dispersion adhesive for cardboard, paperboard, paper, plastic and problematic materials, pH value approx. 5, translucent when set, flexible, moisture-proof, aging-resistant

ethyl cyanoacrylate adhesive, sets colourlessly, begins adhering after 5 - 120 seconds, hazard warning: Xi irritant

cyanacrylate glue, thin fluid, colourless when dry, plastic storage box with safety fastener, hazard warning: Xi irritant

special short-fibred paper ca, 20 g/m², wood and acid free, aging-resistant, CaCO3 buffered, solvent-free acrylate adhesive, paper covered

coloured, strong permanent bond, tear resistant, durable, weatherproof, cotton carrier material

extremely tacky, single component adhesive made out of POP copolymer, permanently elastic, can be painted, UV stable, weather resistant, can be sanded, isocyanate-free, temperature resistant from -40 °C to +90 °C...

two component epoxy resin adhesive, without fillers, viscous, transparent, working life: 3 - 4 minutes, mixing ratio 1:1, temperature resistant from -50 to +80 °C, hazard warnings: Xi irritant, N dangerous for the...

inductor (catalyst) for all commercial super glues, colourless, hazard warnings: Xi irritant, F+ extremely flammable, N dangerous for the environment

polyethylene crosslinked by irradiation, semi-gloss, shrinkage rate 50%, minimum temperature for shrinking 120 °C, changes lengthwise by shrinking ± 10 %, permanent temperature resistance -55 to +105 °C,...

two component epoxy resin adhesive, resin (binder) is translucent white (18 g), hardener is honey-coloured (15 g); working life: 90 minutes; maximum bond after 12 hour; variable mixing ratio, temperature resistant...

single component adhesive and sealing compound, transparent, hardens at room temperature with practically no shrinkage, temperature resistant from -50 °C to +180 °C (short term to 260 °C)

100% cotton, impregnated with potato starch derivatrives (stiffened), coated with polyvinyl acetate, fabric construction: warp 23.0 threads (Nm 50)/cm, weft 14.3 threads (Nm 50)/cm, usable width = 980 mm

ø 11 mm, ethylene vinyl acetate copolymer (EVA) based hot melt adhesive, translucent, very high strength

special longitudinal-fibred paper ca, 50 g/m², tear resistant, wood and acid free, aging-resistant, CaCO3 buffered (pH 7.4), solvent-free acrylate adhesive, paper covered

round, wrapped around a wooden rod

two component methacrylate-based reaction adhesive, high strength adhesion, residual elasticity, utilized with the "no mix process" (no mixing!), transparent, colourless, temperature resistant from -40 °C to +130...

2 component epoxy resin modelling material, embedded with aluminium, cures to aluminium colours, working life approx. 4 minutes, curing time approx. 30 minutes, temperature-resistant from -50 to +120 °C,...

alkoxy cyanoacrylate adhesive, low viscosity, weak smelling, sets colourlessly, begins adhering after approx. 10 - 150 seconds, hazard warning: Xi irritant

two component epoxy resin adhesive for metal (especially aluminium), dark amber colour, working life: depending on the mixture ratio up to 120 minutes, mixture ratios from 100:50 to 100:100, temperature resistant...