Made from highly compressed Valchromat_x000D_
Naturally oiled surface_x000D_
Beveled edge - filigree appearance_x000D_
From a diameter of 60 cm_x000D_
Handcrafted in Germany
| Article No. | |
|---|---|
| Material | High-density fibreboard (Valchromat), dyed black with organic colors, top, bottom and edges oiled twice |
| Edge | 25 ° bevel |
Dark elegance: Our black colored table-top is cut from a piece of high-density MDF (Valchromat), processed at the edges and corners and oiled. Done.
If you want a completely black yet light-looking dining table or meeting table, you can place the MDF tabletop with beveled edges from a diameter of 1 m, for example, on a table frame from our Y series with black tubular steel legs, or solid wooden legs made of black stained ash.
Light look
The edges of our MDF tabletop are beveled at an angle of 25°. Only approx. 8 mm of material remains as a visible tabletop edge, so that the stable tabletop appears significantly thinner, almost floating, despite its dark color.
Oiled, moisture-repellent surface
The open wood fiber surface is treated twice with a special hard wax oil. This makes the table-top moisture-repellent and resistant for your everyday use, but the surface remains open-pored and retains a pleasant, warm feel.
By the way, no Valchromat plate is the same: you can recognize small wood fibers that have not taken on any dye during the dyeing process. Likewise, the black color can vary slightly depending on the types of wood used for the pulp. This gives your black MDF table-top its unique and lively appearance.
Valchromat - a further development of MDF
Valchromat is a water-repellent, solid-colored and highly compressed wood fiber board. During production, wood fibers are dyed with organic colors. Together with a special glue and the power of a press, this creates a dense, homogeneous and very flex-resistant fiberboard with a high weight. Valchromat is a further development of MDF (Medium Density Fiberboard), has more precise and more homogeneous cut surfaces, a higher bending stiffness and a finer finish than "Normal" MDF.
So your oiled MDF table-top stays beautiful for a long time
The oiled wood fiber surface of the MDF table-top is protected from dirt and moisture. If you spill coffee or water on the table-top, the protective film made from an oil-wax mixture prevents the liquid from penetrating immediately, but you should hurry to wipe it off to prevent it from being drawn into the surface. You can use the oiled MDF table-top for your dining table, desk or conference table in the office. But make the effort to oil the surface regularly, then your black table-top will age with elegance and become even more beautiful.
Matching table frames
As mentioned above, the MDF table-top with a beveled edge looks particularly light on our Y table frames, as their frames are offset inwards and are therefore not visible at first glance. For good flatness, we advise you to always screw the 19 mm thick plate to the table frame.
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.
Made from highly compressed Valchromat_x000D_
Naturally oiled surface_x000D_
Beveled edge - filigree appearance_x000D_
From a diameter of 60 cm_x000D_
Handcrafted in Germany
| Article No. | |
|---|---|
| Material | High-density fibreboard (Valchromat), dyed black with organic colors, top, bottom and edges oiled twice |
| Edge | 25 ° bevel |
Dark elegance: Our black colored table-top is cut from a piece of high-density MDF (Valchromat), processed at the edges and corners and oiled. Done.
If you want a completely black yet light-looking dining table or meeting table, you can place the MDF tabletop with beveled edges from a diameter of 1 m, for example, on a table frame from our Y series with black tubular steel legs, or solid wooden legs made of black stained ash.
Light look
The edges of our MDF tabletop are beveled at an angle of 25°. Only approx. 8 mm of material remains as a visible tabletop edge, so that the stable tabletop appears significantly thinner, almost floating, despite its dark color.
Oiled, moisture-repellent surface
The open wood fiber surface is treated twice with a special hard wax oil. This makes the table-top moisture-repellent and resistant for your everyday use, but the surface remains open-pored and retains a pleasant, warm feel.
By the way, no Valchromat plate is the same: you can recognize small wood fibers that have not taken on any dye during the dyeing process. Likewise, the black color can vary slightly depending on the types of wood used for the pulp. This gives your black MDF table-top its unique and lively appearance.
Valchromat - a further development of MDF
Valchromat is a water-repellent, solid-colored and highly compressed wood fiber board. During production, wood fibers are dyed with organic colors. Together with a special glue and the power of a press, this creates a dense, homogeneous and very flex-resistant fiberboard with a high weight. Valchromat is a further development of MDF (Medium Density Fiberboard), has more precise and more homogeneous cut surfaces, a higher bending stiffness and a finer finish than "Normal" MDF.
So your oiled MDF table-top stays beautiful for a long time
The oiled wood fiber surface of the MDF table-top is protected from dirt and moisture. If you spill coffee or water on the table-top, the protective film made from an oil-wax mixture prevents the liquid from penetrating immediately, but you should hurry to wipe it off to prevent it from being drawn into the surface. You can use the oiled MDF table-top for your dining table, desk or conference table in the office. But make the effort to oil the surface regularly, then your black table-top will age with elegance and become even more beautiful.
Matching table frames
As mentioned above, the MDF table-top with a beveled edge looks particularly light on our Y table frames, as their frames are offset inwards and are therefore not visible at first glance. For good flatness, we advise you to always screw the 19 mm thick plate to the table frame.
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.