Hand Tools

pear-shaped beechwood handle with continuous borehole and ejector for easy and fast changing of cutting tools, five different blades made of 0.6 mm tempered steel and conical shafts (veining tool, U-shaped...

5 mm thick hard-wearing, pressure elastic plastic covering, waterproof and limited oil-resistance, aluminium core with plastic hubs, sturdy flat steel support frame, nickel-plated, beech handle with transparent...

steel, chromed or nickel-plated, wooden handle, l = 140 - 165 mm

pear-shaped beechwood handle with continuous borehole and ejector for easy and fast changing of cutting tools, five different blades made of 0.6 mm tempered steel and conical shafts (veining tool, U-shaped...

universal saw, for cuts with and against the grain without depth limitation, BT = 0.5 mm, BL = 265 mm, TL = 600 mm, TS crossways = 1.9 x 3.7 mm, TS lengthwise = 3.3 x 3.6 mm

3 mm thick roller cover (4 mm for the 90 mm wide version) made of resistant, compressive elastic plastic; waterproof and conditionally oil-resistant plastic core, steel wire frame with supports to serve as a stand...

one-sided, fine toothing, mainly for cutting across the grain, BT = 0.3 mm, BL = 150 mm, TL = 370 mm, TS = 1.5 x 2.1 mm

stainless steel, rust-proof, knurled handle, comes with two polished elastic blades

steel, nickel-plated, has recepticle for the punch chads, punch capability is approx. 6 sheets of 80 g paper

dark grey plastic shaft (l = 100 mm) with black head, hardened quality steel die tap with long tool-life, comes in polystyrene insert with cardboard sheath

chinese juniper, sanded and polished, l = 200 mm

one-sided, fine toothing, mainly for cutting across the grain, BT = 0.3 mm, BL = 150 mm, TL = 370 mm, TS = 1.5 x 2.1 mm

steel, outer diameter of the punch: 8 mm, fits the revolving punch pliers 350 and 370

precision mechanical cutter, forged from carbon steel, with leaf spring, rough soft plastic handle

fret saw V-board (wood, 170 x 65 mm, th = 10 mm, hole diameter is 17 mm); table clamp (steel, nickel-plated, 5 x 10 mm, 50 mm jaw opening)

chrome-plated, fine-grooved tips, comes in plastic case

universal saw, for cuts with and against the grain without depth limitation, BT = 0.5 mm, BL = 265 mm, TL = 600 mm, TS crossways = 1.9 x 3.7 mm, TS lengthwise = 3.3 x 3.6 mm

cut 2 (per DIN 8349), with rammed wooden handle with clear varnish, the given measurement is the length of the file without the handle, profile types in set: flat-blunt, flat-pointed, three square, square, half...

one-sided, fine toothing, mainly for cutting across the grain without depth limitation, BT = 0.5 mm, BL = 250 mm, TL = 580 mm, TS = 1.5 x 3.5 mm

one-sided, fine toothing, mainly for cutting across the grain without depth limitation, BT = 0.5 mm, BL = 250 mm, TL = 580 mm, TS = 1.5 x 3.5 mm

fret saw V-board (wood, 170 x 65 mm, th = 10 mm, hole diameter is 17 mm); table clamp (steel, nickel-plated, 5 x 10 mm, 50 mm jaw opening)

steel, outer diameter of the punch: 8 mm, fits the revolving punch pliers 350 and 370

cast iron, chromed, for making holes and eyelets in one step as well as for making separate pre-holes, adjustable depth stop when making holes (maximum insertion (throat) depth: 13 mm up to the middle of the hole),...

nickel-plated steel, revolving ring with 6 different hole diameters, punch heads can be changed, locking clamp for the handles, handles are plastic covered, made in Germany