0
Basket
My account
B2B
Store
      Categories
      Products
      searching for products ...
      There is no result for »askldhasd«.
      HomeElectrical ToolsStationary Machines

      Stationary Machines

      Further info

      Product Type

      Application

      Brand

      Price

      36 article   /   92 Variants
      Page 1 of 2
      Sort by: Relevance
      • Relevance
      • Topseller
      • Price - lowest first
      • Price - highest first
      View
      • Styrocut 3 thermo cutter
        multiplex worktop 265 x 610 mm covered with anodised chequered aluminium, guide bar moves along the side on ball bearings, front and back adjustable buffers, topside wire mounted on adjustable slides, adjustable...
         
        Styrocut 3 thermo cutter
        from 665,00 €
      • Proxxon Thermocut hot wire cutter
        injection mould plastic housing, aluminium-cobond covered laminated panel (Alu/PE) 280 x 390 mm (with printed grid and protractor), adjustable fence in 2-sided guide groove, solid aluminium overarm with lateral jaw...
         
        Proxxon Thermocut hot wire cutter
        from 109,00 €
      • Styrocut 2 thermo cutter
        multiplex worktop 265 x 410 mm covered with anodised chequered aluminium, guide bar moves along the side on ball bearings, front and back adjustable buffers, topside wire mounted on adjustable slides, adjustable...
         
        Styrocut 2 thermo cutter
        from 619,00 €
      • Cutting wire for hot wire cutters
        NiCr 8020 hot cutting wire
         
        Cutting wire for hot wire cutters
        from 1,95 €
      • Blades for Proxxon scroll saw DSH
        with pin end, l = 127 mm (round saw blade without pin end, l = 125 mm)
        4 Variants
        Blades for Proxxon scroll saw DSH
        from 4,90 €
      • Styrocut accessories
        7 Variants
        Styrocut accessories
        from 18,90 €
      • Exchange part for Proxxon circular table saw FET
        3 Variants
        Exchange part for Proxxon circular table saw FET
        from 7,80 €
      • Hegner disc sander HSM 300
        sturdy aluminium housing with large heavy base for stability, anodised sanding table 520 x 260 mm (can rotate down up to 45° beyond scale) with screw for the mitre stop, purging vent and connecting piece ø...
         
        Hegner disc sander HSM 300
        from 767,90 €
      • Blades for Proxxon circular table saws FET & FKS/E
        with bore hole diameter of 10 mm
        3 Variants
        Blades for Proxxon circular table saws FET & FKS/E
        from 13,95 €
      • Replacement part for Proxxon Thermocut
        2 Variants
        Replacement part for Proxxon Thermocut
        from 5,80 €
      • Proxxon replacement cutting wire
         
        Proxxon replacement cutting wire
        from 7,50 €
      • Accessories for SILHOUETTE CAMEO
        5 Variants
        Accessories for SILHOUETTE CAMEO
        from 14,90 €
      • Blades for Proxxon circular table saw KS 230
        with bore hole ø 10 mm
        5 Variants
        Blades for Proxxon circular table saw KS 230
        from 9,90 €
      • Cutting plotter SILHOUETTE CAMEO
        Plastic housing with cover, LCD display and function pushbuttons, power transmission by a multiphase motor (drag knife), transport of media by means of grit rollers, sensor head for automatic 3-point...
         
        Cutting plotter SILHOUETTE CAMEO
        from 339,00 €
      • Grinding wheels for Proxxon disc sander
        self-adhesive, ø 250 mm
        4 Variants
        Grinding wheels for Proxxon disc sander
        from 3,60 €
      • Hegner scroll saw Multicut-2S
        stable cast steel construction, fine machined work table of gravity die-cast aluminium 435 x 230 mm (tilts 45°/12° for scaled mitre cuts), connecting device ø 35 for top and bottom suction removal, light metal -...
        2 Variants
        Hegner scroll saw Multicut-2S
        from 780,30 €
      • Blades for Kaleas table circular saw
        ø 63 mm with bore hole ø 16 mm
        4 Variants
        Blades for Kaleas table circular saw
        from 27,10 €
      • Sanding discs for Hegner HSM 300
        with Velcro, ø 300 mm
        10 Variants
        Sanding discs for Hegner HSM 300
        from 18,70 €
      • Kaleas high power transformer III
        continuously adjustable rotation speed, with 4 different connection sockets for all Kaleas machines and other popular small machine products, allows many machines to be used at once, TÜV approved power...
         
        Kaleas high power transformer III
        from 86,40 €
      • Replacement part for Proxxon disc sander TG 250/E
         
        Replacement part for Proxxon disc sander TG 250/E
        from 8,00 €
      • Accessories for Craft Robo CC330/Silhouette
        5 Variants
        Accessories for Craft Robo CC330/Silhouette
        from 11,90 €
      • Replacement parts for Kaleas table circular saw
        3 Variants
        Replacement parts for Kaleas table circular saw
        from 6,40 €
      • Hegner scroll saw Multicut-1
        stable cast steel construction, fine machined work table of gravity die-cast aluminium 435 x 230 mm (tilts 45° for scaled mitre cuts), connecting device ø 35 for top and bottom suction removal, light metal -...
         
        Hegner scroll saw Multicut-1
        from 494,40 €
      • Proxxon circular table saw KS 230
        ABS plastic housing with a sliding side door allowing easy removal of sawdust; machined, die-cast aluminium table 160 x 160 mm, quiet high performance motor tested for prolonged use, saw blade shaft runs is equipped...
         
        Proxxon circular table saw KS 230
        from 119,00 €
      • Safety hood for Hegner HSM 300
        sheet steel
         
        Safety hood for Hegner HSM 300
        from 58,90 €
      • Coolant system for Multicut scroll saw
        coolant container, plastic, feeder tube, foot pump
         
        Coolant system for Multicut scroll saw
        from 79,00 €
      • Proxxon bench drill TBM 220
        machined worktop of die-cast aluminium 220 x 120 mm, parallel fence with scale; solid hard-chromed steel column 20 x 280 mm, die-cast headstock with reamed guides and fittings, extremely quiet motor with long life...
         
        Proxxon bench drill TBM 220
        from 175,00 €
      • Accessories for Graphtec CE6000-40
        9 Variants
        Accessories for Graphtec CE6000-40
        from 69,00 €
      • Circular sanding attachment for Hegner HSM 300
        aluminium, for circular sanding discs with outer ø 30 - 300 mm and centered bore hole ø 6, 8, 10, 12 or 15 mm, includes attachment peg and additional bushes for the various diameters
         
        Circular sanding attachment for Hegner HSM 300
        from 121,70 €
      • Graphtec CE6000-40 cutting plotter
        Metal/Plastic housing, graphic 3.7 inch LCD display and fifteen function keys (program in 10 languages) , power transmission by a digital servo motor (drag and tangential knife), cutting force has 31 levels of...
         
        Graphtec CE6000-40 cutting plotter
        from 1.499,00 €
      • Proxxon fine cut circular table saw FET
        plastic housing with the load-bearing parts made of die-cast aluminium, machined die-cast aluminium worktop, extension wing pulls out from the side to 510 mm, saw blade is adjustable for height (1 - 22 mm) and...
         
        Proxxon fine cut circular table saw FET
        from 349,00 €
      • Proxxon scroll saw DSH
        machine base of cast iron with rubber feet; very large, stable die-cast aluminium saw table of 360 x 280 mm (tilts up to 45° for mitre cuts); quiet induction motor with switchable speed control, 2 slender parallel...
         
        Proxxon scroll saw DSH
        from 229,00 €
      • Kaleas table circular saw
        sturdy die-cast aluminium construction, table is 220 x 210 mm, collar on the side for grinding disc, saw blade adjustable for height (0 - 15 mm) and able to be tilted (90° - 45°), recepticle for standard commercial...
         
        Kaleas table circular saw
        from 247,40 €
      • Accessories for Multicut scroll saw
        3 Variants
        Accessories for Multicut scroll saw
        from 25,80 €
      • Accessoires for Kaleas table circular saw
        3 Variants
        Accessoires for Kaleas table circular saw
        from 6,10 €
      Page 1 of 2
      This is Modulor
      Modulor Newsletter
      Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information