material: inner layer made from hard PVC, top layer from soft PVC, Material layers: 3-layered (transparent) or 5-layered (green/black), Material strength: 3 mm, Features: Both sides (green/black) or one side (translucent) printed with grid design and cm graduation
3 Variants
Snap-off blades, standard
from 1,20 €
come in translucent plastic case
Art knife K1 (Xacto)
from 3,40 €
round aluminium handle, knurled grip zone, includes protective cap
4 Variants
Drafting and cutting ruler, acrylic
from 11,30 €
transparent, steel edge and bevelled edge, raised nubs, partial silicone strips, coloured grid and graduation, th = app. 3.0 mm
2 Variants
Aluminium cutting ruler with steel edge, thin
from 20,90 €
material: anodised aluminium, Steel edge: steel edge for cutting or ink drawing/aluminium bevelled edge with imprinted mm graduation, equipment: with hanging hole and anti-slip reverse side (rubber)
Blades for K1 art knife
from 3,60 €
Characteristic: Blades in plastic case, Material: Tempered steel, Length cutting edge: 37 mm, Blade length: 20 mm
Ecobra metal cutter, for 9 mm blades, lock screw
from 4,90 €
silver aluminium handle with chromed steel clip, unrestricted feeder, positioning lock screw, blade in metal guide
Body: stainless steel handle and clip, Stepped feed: with Auto-Stop, Package contents: cutter with blade, 2 replacement blades, Packaging: blister pack
6 Variants
Ulmer steel cutting square with facing
from 24,50 €
steel, open-worked with a bar in the middle, painted grey, bevelled edge on a side piece, without graduation, knob for gripping, th = 2 mm
Aluminium cutting ruler with incumbent steel edge
from 12,90 €
thin, anodized aluminium, incumbent steel edge for cutting and laying out templates, aluminium beveled face with imprinted mm graduation, anti-slip (rubberized) reverse side, comes in soft plastic case, th = 6 mm, w...
Art knife with roll preventer
from 3,30 €
round plastic barrel with roll preventer (hexagon ring on barrel end), light-alloy internal mechanism, ribbed light-alloy locking piece, includes protective cap and one replacement blade in a plastic container
Olfa Cutter NOL-1 for 18 mm blades
from 10,90 €
yellow soft-grip plastic handle (anti-slip), notched feeder, positioning lock screw, blade in metal guide
4 Variants
Replacement parts for Dahle paper trimmer 507/508
from 3,20 €
2 Variants
Logan Adapt-A-Rule straight edge
from 37,10 €
material: anodised aluminium, design: Guide slot for Logan passepartout cutter, aluminium edge for cutting/black aluminium face with mm/inch graduation,, Accessories: includes upgrade kit for 45° and 90° Logan passepartout cutters
3 Variants
Dahle Office Comfort Grip paper scissors
from 3,50 €
Blade material: hardened steel, Handle material: polypropylene, rubber padded, Versions: for righthanders, for lefthanders, Cutting blades connection: rivet
Ecobra metal cutter, silver
from 6,50 €
Material: full metal housing, steel blade, Colour: silver, Attributes: metal cutter guide, notched slider, auto lock, Configuration: with hole for hanging, clip and breakoff device
Cutter for 18 mm blades with screw-lock
from 4,20 €
plastic handle with cushioned grip, notched feeder, positioning lock screw, blade in metal guide, snap-off aid
2 Variants
Logan passepartout cutter set
from 67,90 €
Product description: Logan Adapt-A-Rule cutting guide (anodised aluminium, slide groove for Logan bevel cutter, equipment: aluminium edge for cutting/black aluminium face with mm/inch graduation, with hanging hole and non-slip rubber base, includes 5 ...
3 Variants
Standard cutting mats, table sizes
from 109,00 €
three-layered (1.0 mm each: soft PVC/rigid PVC/soft PVC), one side with imprinted cm graduation, th = 2.5 mm
Art knife cutter set
from 9,00 €
round aluminium handle with knurled grip zone, 6 different blades
Olfa cutter No. 300 for 9 mm blades
from 7,90 €
yellow plastic handle, notched feeder, positioning lock screw, blade in metal guide
Cutting heads for Dahle paper trimmer 507/508
from 12,90 €
with ground circular blade, plastic housing
2 Variants
Olfa craft knife CK-2
from 5,90 €
metal handle, fully retractable knife made from Inox stainless steel, (l = 55 mm, th = 1.2 mm), can be resharpened
2 Variants
Cutter for 9/18 mm blades with auto-stop
from 2,50 €
plastic handle with clip (only 9 mm cutter), notched feeder, blade in metal guide
2 Variants
Olfa top sheet cutter TS-1
from 4,90 €
cream white plastic handle, fully retractable blade, hinged magazine with 2 replacement blades in the handle
2 Variants
Olfa acrylic knife PC-L
from 4,90 €
yellow plastic handle, retractable blade, built-in room in the handle with two spare blades
Art knife (Xacto) K1, set
from 4,90 €
Contains: Handle and 5 K1 blades, Material: Aluminium, Handle: Round aluminium handle; knurled grip zone, Length handle: 115 mm
2 Variants
Cutter for 9/18 mm blades with cartridge
from 4,70 €
grey plastic handle with black gummed grip zone, slide brake, notched feeder with auto-stop function, blade in metal guide, magazine with blades in handle which can be automatically reloaded
Foamwerks straight/bevel cutter WC-6010
from 24,50 €
cutter for 90° and 45° cuts in sandwich panels with up to 5 mm thicknesses, plastic housing with adjustable angle, adjustable blade depth, on-board blade storage area
2 Variants
Dahle Professional paper scissors
from 23,10 €
Blade material: stainless steel, hardened, Handle material: ABS plastic, impact resistant and colourfast, Versions: for righthanders, Cutting blades connection: screw joint with nylon retainer
Logan mat cutter 301-1 Compact Classic
from 178,00 €
Construction: cutting system with plastic base board non-slip rubber feet, spring loaded aluminium guide rail and parallel aluminium mat guid ..., equipment: guide rail with an open ended slide groove guide on the side, two cutting heads includes 5 blades (No 270), detailed instructio ...
NT C 1500 P circle cutter
from 30,90 €
white plastic with metal workings, includes protective cap for the blade and a guide line template
Ecobra rotary cutter for right and left hand use
from 9,20 €
ergonomic plastic handle, rubberized (black, anti-slip), blade and guide can be changed to opposite side for left-handers, pull-off blade protection, 45 mm diameter round blade, hanging hole
3 Variants
Olfa rotary cutter RTY-1/G 28
from 6,90 €
yellow plastic handle, blade protection, round blade ø 28 mm
3 Variants
Cutting mats, top quality, table sizes
from 262,80 €
three layered (1.0 mm each: soft PVC/rigid PVC/soft PVC), without inscription, th = 3.0 mm
view more articles
✖
Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies. More information
Welcome to Modulor
WITH or WITHOUT VAT?
At Modulor you can shop as a business customer (without VAT) or as a private customer (with VAT).
