Removes dyes without damaging the fibers
Heat activation for controlled decolorization
Post-treatment by washing restores fiber softness
Ready-to-use: ready-to-use paste
Suitable for various techniques such as screen printing, stamp printing, painting
| Location in Store | |
|---|---|
| Article No. | 3021212-ST |
| Application | Direct application by brush, sponge, stencil or screen printing |
| Activation by | Heat (ironing and steam if necessary) |
| Form | ready-to-use paste |
| Suitable materials | dyed natural fibers (cotton, linen, silk, wool) and paper |
| Effect | decolors dyes, resulting color may vary |
| Aftercare | Wash fabric with mild detergent |
| Test recommendation | Test on an inconspicuous area in advance |
| Important | Use in a well-ventilated environment; avoid contact with skin and eyes |
The Jacquard color remover paste Decolourant is used for the targeted removal of dyes from dyed natural fibers such as cotton, linen, silk and wool as well as from craft paper. It is formulated as a ready-to-use paste and therefore differs from liquid dye removers or sprays. The chemical action is directed against the dye, not the fiber: Decolourant removes dye without weakening or destroying the fiber structure, as would be the case with classic bleaching agents.
It is applied directly to the dyed surface with a brush, sponge, stencil, screen print or stamp. After drying, the color removal is activated by heat. Ironing at the highest possible temperature suitable for the fabric and, if necessary, with steam will start the color removal process. You should then wash the material to restore the softness of the fibers and remove any residual paste.
The resulting color nuances after dye removal depend on the original type of dye; they are not always completely white, but can appear beige, pastel or in other light shades. It is therefore advisable to carry out a preliminary test on an inconspicuous area before large-scale applications are carried out.
Decolourant is suitable for textile design techniques such as screen printing, stamp printing or painting on fabrics if color is to be reduced or selectively removed. Due to its paste-like consistency, it is particularly suitable for applications where control and precision are important.
Achtung, (VOC-Gehalt = 0,0 %), Sodium Formaldehyde Sulfoxylate = < 12 %, Mutagen, Category 3
- H341: Suspected of causing genetic defects <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
- P201: Obtain special instructions before use.
- P202: Do not handle until all safety precautions have been read and understood.
- P281: Vorgeschriebene persönliche Schutzausrüstung verwenden.
- P308+P313: IF exposed or concerned: Get medical advice / attention.
- P405: Store locked up.
- P501: Dispose of contents / container to …
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 99 €.
5,95 € shipping costs, if order value is less than 99 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 99 €
Forwarding shipping
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.
Jacquard color remover paste Decolourant
Removes dyes without damaging the fibers
Heat activation for controlled decolorization
Post-treatment by washing restores fiber softness
Ready-to-use: ready-to-use paste
Suitable for various techniques such as screen printing, stamp printing, painting
| Location in Store | |
|---|---|
| Article No. | 3021212-ST |
| Application | Direct application by brush, sponge, stencil or screen printing |
| Activation by | Heat (ironing and steam if necessary) |
| Form | ready-to-use paste |
| Suitable materials | dyed natural fibers (cotton, linen, silk, wool) and paper |
| Effect | decolors dyes, resulting color may vary |
| Aftercare | Wash fabric with mild detergent |
| Test recommendation | Test on an inconspicuous area in advance |
| Important | Use in a well-ventilated environment; avoid contact with skin and eyes |
The Jacquard color remover paste Decolourant is used for the targeted removal of dyes from dyed natural fibers such as cotton, linen, silk and wool as well as from craft paper. It is formulated as a ready-to-use paste and therefore differs from liquid dye removers or sprays. The chemical action is directed against the dye, not the fiber: Decolourant removes dye without weakening or destroying the fiber structure, as would be the case with classic bleaching agents.
It is applied directly to the dyed surface with a brush, sponge, stencil, screen print or stamp. After drying, the color removal is activated by heat. Ironing at the highest possible temperature suitable for the fabric and, if necessary, with steam will start the color removal process. You should then wash the material to restore the softness of the fibers and remove any residual paste.
The resulting color nuances after dye removal depend on the original type of dye; they are not always completely white, but can appear beige, pastel or in other light shades. It is therefore advisable to carry out a preliminary test on an inconspicuous area before large-scale applications are carried out.
Decolourant is suitable for textile design techniques such as screen printing, stamp printing or painting on fabrics if color is to be reduced or selectively removed. Due to its paste-like consistency, it is particularly suitable for applications where control and precision are important.
Achtung, (VOC-Gehalt = 0,0 %), Sodium Formaldehyde Sulfoxylate = < 12 %, Mutagen, Category 3
- H341: Suspected of causing genetic defects <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
- P201: Obtain special instructions before use.
- P202: Do not handle until all safety precautions have been read and understood.
- P281: Vorgeschriebene persönliche Schutzausrüstung verwenden.
- P308+P313: IF exposed or concerned: Get medical advice / attention.
- P405: Store locked up.
- P501: Dispose of contents / container to …
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 99 €.
5,95 € shipping costs, if order value is less than 99 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 99 €
Forwarding shipping
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.