Housing material: plastic injection moulding, Worktop material: aluminium-cobond Alu/PE laminated panel, Dimensions: 280 mm x 390 mm, Transformer: secondary; max. 10 V at 1 A
Blades for Proxxon circular table saws FET & FKS/E
from 24,90 €
with bore hole diameter of 10 mm
2 Variants
Replacement part for Proxxon Thermocut
from 7,90 €
Proxxon foot switch FS
from 19,90 €
fibreglass reinforced nylon housing, with 2.5 m long connecting cable and 50 cm long output cable
machine base of cast iron with rubber feet; very large, stable die-cast aluminium saw table of 360 x 280 mm (tilts up to 45° for mitre cuts); quiet induction motor with switchable speed control, 2 slender parallel...
Blades for Proxxon circular table saws FET & FKS/E
from 15,90 €
with bore hole diameter of 10 mm
Blades for Proxxon circular table saw KS 230
from 9,90 €
with bore hole ø 10 mm
Proxxon hot wire cutter Thermocut 12/E
from 39,90 €
plastic housing, pivotable and extendable wire fixing element, infinitely variable cutting temperature, power cord is 0.5 m
Output: 60 W
Voltage: 12 V
Working temperature: adjustable from about 150 °C –...
Proxxon fine cut circular table saw FET
from 429,00 €
plastic housing with the load-bearing parts made of die-cast aluminium, machined die-cast aluminium worktop, extension wing pulls out from the side to 510 mm, saw blade is adjustable for height (1 - 22 mm) and...
Proxxon precision machine vice FMZ
from 39,90 €
with die-cast zinc clamp for worktops up to 60 mm thick, ball joint (rotates and swings in all directions), 75 mm jaws with rubber covering for sensitive work pieces, weighs 1.6 kg
with pin end, l = 127 mm (round saw blade without pin end, l = 125 mm)
Proxxon diamondized cutting discs
from 8,90 €
with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness
Blades for Proxxon scroll saw DSH, 25 t.
from 6,90 €
Length with cross pin: 127 mm, Length with round saw blade without cross pin: 125 mm
Proxxon tungsten-vanadium steel mill bits
from 5,90 €
purpose-made and selected wolfram vanadium steel, shafts and milling tips manufactured from one-piece blanks, various shapes (see picture), shaft ø 2.35 mm or 3.0 mm (see picture again)
Proxxon Thermocut 650 hot wire cutter
from 89,00 €
Material Housing: plastic injection, Material bracket: aluminum/plastic/steel, Cutting length: 400-650 mm, Depth of cut (passage): 200 mm
Proxxon model building and engraving set
from 79,90 €
Material: Housing as glass-fibre reinforced polyamide, Operating voltage: 12 - 18 V, Power: Up to 40 W, Speed: 5,000 - 20,000 rpm
Proxxon cut-off sawing blades, spring steel
from 4,50 €
with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness
Proxxon mains adaptor Micromot NG 2/E
from 39,90 €
compact housing made from Noryl (especially heat-resistant as is essential for transformers), thyristor electronic speed control (with feedback), overload protection (Positive Temperature Coefficient resistance), 1...
Proxxon circular table saw KS 230
from 139,00 €
ABS plastic housing with a sliding side door allowing easy removal of sawdust; machined, die-cast aluminium table 160 x 160 mm, quiet high performance motor tested for prolonged use, saw blade shaft runs is equipped...
3 Variants
Proxxon tungsten-vanadium steel twist drill bits
from 4,50 €
purpose-made and selected wolfram vanadium steel, shafts and drill tips manufactured from one-piece blanks, shaft ø 2.35 mm, l (total) = 44 mm
Proxxon replacement cutting wire Thermocut 12/E
from 16,90 €
easy to bend, anti-adherence coating, 1.5 Ω electrical resistance
Blades for Proxxon scroll saw DSH, 18 t.
from 6,90 €
Length with cross pin: 127 mm, Length with round saw blade without cross pin: 125 mm
Proxxon bench drill TBM 220
from 199,00 €
machined worktop of die-cast aluminium 220 x 120 mm, parallel fence with scale; solid hard-chromed steel column 20 x 280 mm, die-cast headstock with reamed guides and fittings, extremely quiet motor with long life...
Proxxon precision drill grinder FBS 240/E
from 79,90 €
sturdy fibreglass-reinforced polyamide housing with comfort sections in the grip area and a 20 mm collar that fits to the Micromot system components, spindle runs in precision ball bearing and is fitted with a lock...
Blades for Proxxon circular table saw KS 230
from 11,50 €
with bore hole ø 10 mm
Proxxon disc sander TG 250/E
from 269,00 €
main housing is ribbed die-cast aluminium, table ( 275 x 105 mm) has slot for mitre gauge and tilts inwards up to 45° and outwards up to 15°, backing disc accepts self-adhesive sanding discs ø 250 mm...
✖
Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies. More information
Welcome to Modulor
WITH or WITHOUT VAT?
As a business customer, see net prices - or as an individual customer, see all prices including sales tax.
