piano di lavoro: multiplex rivestito con foglio di alluminio anodizzato e retinato, dimensioni del piano di lavoro: 265 x 610 mm, angolo di battuta: le guide si muovono lungo il lato su cuscinetti a sfera, registrabile sul fronte e sul retro con 2 tamponi ammortizzanti regola ...
Sega termica Proxxon Thermocut
from 109,00 €
injection mould plastic housing, aluminium-cobond covered laminated panel (Alu/PE) 280 x 390 mm (with printed grid and protractor), adjustable fence in 2-sided guide groove, solid aluminium overarm with lateral jaw...
Filo da taglio per seghe termiche
from 1,95 €
NiCr 8020 hot cutting wire
Tagliapolistirolo Styrocut 2
from 619,00 €
multiplex worktop 265 x 410 mm covered with anodised chequered aluminium, guide bar moves along the side on ball bearings, front and back adjustable buffers, topside wire mounted on adjustable slides, adjustable...
from 18,90 €
Parti di ricambio per sega circolare x banco FET
from 7,80 €
Lame per traforo Proxxon DSH
from 4,90 €
with pin end, l = 127 mm (round saw blade without pin end, l = 125 mm)
Proxxon replacement cutting wire
from 7,50 €
Lame per seghe da traforo e da svolgere
from 3,30 €
l = 130 mm, hardened, given material suitability: wood (H), plastic (K)
Ricambio per tagliapolistirolo Proxxon Thermocut
from 5,80 €
Lame circolari per sega da banco Kaleas
from 27,10 €
ø 63 mm with bore hole ø 16 mm
Lame sega circolare da banco Proxxon FET & FKS/E
from 13,95 €
with bore hole diameter of 10 mm
Scatola utensili per sega da traforo
from 16,50 €
fret saw (bow), red wooden handle, bow is tubular steel (painted black) with 13 mm diameter x 1 mm, spring-loaded chuck and rubber buffer, hardened wingnuts, working reach = 320 mm; included tools: hand (Persian)...
Traforo Hegner Multicut-2S
from 780,30 €
stable cast steel construction, fine machined work table of gravity die-cast aluminium 435 x 230 mm (tilts 45°/12° for scaled mitre cuts), connecting device ø 35 for top and bottom suction removal, light metal -...
Seghetto manuale PUK 2200
from 3,80 €
made of 6 mm round steel, powder-coated, l = 240 mm (including handle), fitted with PUK 310 saw blade
Sega circolare di precisione x banco Proxxon FET
from 349,00 €
plastic housing with the load-bearing parts made of die-cast aluminium, machined die-cast aluminium worktop, extension wing pulls out from the side to 510 mm, saw blade is adjustable for height (1 - 22 mm) and...
Lame per seghetti manuali PUK
from 6,00 €
hardened steel, wavy-set sharp teeth, with mounting holes, l = 150 mm (distance between holes is 146 mm), w = 6 mm, th = 0.4 mm, given material suitability; wood (W), metal (M), plastic (P)
Regolatore di tensione Kaleas 3 Monster
from 86,40 €
continuously adjustable rotation speed, with 4 different connection sockets for all Kaleas machines and other popular small machine products, allows many machines to be used at once, TÜV approved
Ryoba SM265W Bakuma
from 19,80 €
universal saw, for cuts with and against the grain without depth limitation, BT = 0.5 mm, BL = 265 mm, TL = 600 mm, TS crossways = 1.9 x 3.7 mm, TS lengthwise = 3.3 x 3.6 mm
Kataba 250 Bakuma
from 15,00 €
one-sided, fine toothing, mainly for cutting across the grain without depth limitation, BT = 0.5 mm, BL = 250 mm, TL = 580 mm, TS = 1.5 x 3.5 mm
Lame per sega circolare da banco Proxxon KS 230
from 9,90 €
with bore hole ø 10 mm
Seghetto manuale PUK 300
from 9,80 €
frame made of 5.4 mm thick, nickel-plated rectangular bar steel, beechwood handle, l (max.) = 310 mm (including handle), fitted with a PUK 310 saw blade, comes in PE case
from 9,10 €
Material: beechwood, Length: 300 mm, Width (inner): 65 mm
Parti ricambio per sega circolare da banco Kaleas
from 6,40 €
Sega ad archetto in metallo robusto PUK 3100
from 9,50 €
solid metal frame conforming to German norm DIN 6473, powder-coated, beechwwod handle, l = 510 mm (with handle), mounting pins cannot be lost, saw blade can twist up to 90 °, includes 1 bi-metal saw blade with 24...
Accessori per trafori Multicut
from 25,80 €
Sega Dokuzi mini Z
from 16,50 €
one-sided, fine toothing, mainly for cutting across the grain, BT = 0.3 mm, BL = 150 mm, TL = 370 mm, TS = 1.5 x 2.1 mm
Seghetto a gattuccio Proxxon STS 12/E
from 49,00 €
sturdy fibreglass reinforced polyamide housing, powerful 12 to 18 V motor, includes two saw blades (course and fine)
distribution voltage (power supply): 12 - 18 V stroke: 6 mm strokes per minute: controlled from...
Sega Stanley lama fine
from 13,90 €
reversible and ergonomic handle, high quality steel, 14 teeth/inch, double sharpened, teeth are ground, teeth tips are hardened
Lame per troncare Proxxon in acciaio per molle
from 3,90 €
with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness
Accessori per seghe da traforo
from 4,90 €
fret saw V-board (wood, 170 x 65 mm, th = 10 mm, hole diameter is 17 mm); table clamp (steel, nickel-plated, 5 x 10 mm, 50 mm jaw opening)
Sega da traforo ad archetto
from 7,20 €
beechwood handle, 13 mm diameter steel rod frame (painted black), spring-loaded chuck, hardened wingnuts
Lame per seghetti STS 230/E e STS 12/E
from 3,90 €
Accessori per sega circolare da banco Kaleas
from 6,10 €
Traforo Proxxon DSH
from 229,00 €
machine base of cast iron with rubber feet; very large, stable die-cast aluminium saw table of 360 x 280 mm (tilts up to 45° for mitre cuts); quiet induction motor with switchable speed control, 2 slender parallel...
Seghetto Proxxon super STS 230/E
from 99,00 €
sturdy fibreglass-reinforced polyamide housing, stable head of die-cast aluminium, reduction gear and additional stroke speed regulator (full wave electronic speed control), foot is adjustable for up to 45° mitre...
view more articles
This is Modulor
We Love Material
Whether for design, architecture, model making, DIY, artwork or stationery: over 30,000 articles that make the heart beat faster. For professionals. And aspiring professionals.
Inspiring & Unique
Abreast of all developments in the world of materials: At Modulor there are always new, first-class products waiting to be discovered. In all shapes and colours – and in many instances tailor-made.
Esperti creativi per tradizione
Questions about materials? We provide personalized and competent advice. With over 25 years of experience our enthusiasm for materials continues unabated: +49 30 690 360
PayPal, credit cards, direct debit – at Modulor paying is very simple. Pay after delivery? No problem: just select „Invoice“ as payment method.
We deliver with our logistics partner quickly and securely – upon inquiry, same day delivery is even available within the Berlin city limits.
A Berlin Original
All the products and even more ideas can be experienced in person at our Berlin-Kreuzberg store. Over two floors and more than 3,000 m².