0
Carrello
My Account
B2B
Negozio
      Categories
      Prodotti
      searching for products ...
      There is no result for »askldhasd«.
      HomeSagomare e fare un calco

      Sagomare e fare un calco

      Further info

      Materiale

      Gruppo colore

      Marchio

      Price

      187 article   /   721 Variants
      Page 1 of 6
      Sort by: Relevance
      • Relevance
      • Topseller
      • Price - lowest first
      • Price - highest first
      View
      • Barra in vetro acrilico XT tonda, incolore
        transparent, colourless, glossy
        40 Variants
        Barra in vetro acrilico XT tonda, incolore
        from 1,40 €
      • Polistirolo espanso rigido, bianco, non rifilato
        Nucleo form ...
        pannello in polistirolo estrus ...
        Superficie
        ruvida (senza tagli)
        Caratterist ...
        molto resistente alla pression ...
        bordi
        diritti
        3 Variants
        Polistirolo espanso rigido, bianco, non rifilato
        from 14,80 €
      • Schiuma polistirene esp. celeste, non rifilata
        medium pore insulating board from extruded polystyrene rigid foam board, pressure-resistant, smooth, semi-gloss surfaces, straight edges, approx. 33 kg/m³, certified to EN 13501-1 norm, conforms to DIN 4102 building...
        9 Variants
        Schiuma polistirene esp. celeste, non rifilata
        from 2,40 €
      • Barra tonda di ottone
        Material
        brass
        19 Variants
        Barra tonda di ottone
        from 1,05 €
      • Protopaper
        matte finish on one side
        2 Variants
        Protopaper
        from 2,95 €
      • Formcard meltable bio-plastic
        Material
        Thermoplastic bioplastic
        Dimensions
        card: 2,5 x 55 x 85 mm
        5 Variants
        Formcard meltable bio-plastic
        from 6,90 €
      • Polistirolo espanso rigido, avorio, non rifilato
        medium pore insulating block made out of extruded polystyrene rigid foam; pressure-resistant, smooth, semi-gloss surface; straight edges, approx. 35 kg/m³, certified as conforming to EN 13501-1, conforms DIN 4102...
        9 Variants
        Polistirolo espanso rigido, avorio, non rifilato
        from 3,35 €
      • Gomma siliconica autoindurente Sugru
        air curing, hand-formable rubber based on the silicone elastomer Formerol, self-adhering, after curing is permanently flexible (Shore A -hardness is 70 Sh), the colours can be mixed among themselves, odourless,...
        7 Variants
        Gomma siliconica autoindurente Sugru
        from 8,50 €
      • Worbla´s Finest Art modeling material sheet
        cellulose-polyester composite, light brown and opaque, th = 1 mm, ca. 1100 g/m², can be thermoplasically shaped any number of times, one side is coated with a thermoplastic adhesive (smooth, semi-matte surface)...
        5 Variants
        Worbla´s Finest Art modeling material sheet
        from 5,00 €
      • Granulato termoplastico per modellare Modulor
        white granules, pearl-sized (about 3 mm), polyutethane elastome, melting point ca. 60 °C, specific weight 1,2 g/cm²; hazardous warning: none
        3 Variants
        Granulato termoplastico per modellare Modulor
        from 3,60 €
      • Resina acrilica  laminatura/stampiAcrylstal Prima
        two component water-based acrylic resin system for casting, laminating and coating, for interior as well as protected exterior spaces, hard (81-83 Sh-D hardness), impact resistant, odourless, material is opaque white...
        4 Variants
        Resina acrilica laminatura/stampiAcrylstal Prima
        from 26,60 €
      • Polistirolo espanso rigido, argento, non rifilato
        fine pored modelling panel made of extruded polystyrene rigid foam, very compression resistant (high density), glossy surfaces (untrimmed), straight edges, approx. 34 kg/m³, certified per DIN EN 13501-1; Euroclass...
        3 Variants
        Polistirolo espanso rigido, argento, non rifilato
        from 8,50 €
      • Barra in vetro acrilico XT tonda, fluorescente
        transparent, flourescent, glossy
        48 Variants
        Barra in vetro acrilico XT tonda, fluorescente
        from 2,60 €
      • Barra tonda di alluminio
        16 Variants
        Barra tonda di alluminio
        from 0,75 €
      • Resina rapida poliuretano per stampi PUR G 27
        2 component quick casting resin, without fillers, hard (approx. 70 Sh.D), highly impact-resistant, very low viscosity (pours extremely well), a substantial amount of fillers can be added, odorless, cures to an opaque...
        4 Variants
        Resina rapida poliuretano per stampi PUR G 27
        from 20,50 €
      • Plastilina standard, colorata
        „handicraft plasticine“, comes in foil package
        11 Variants
        Plastilina standard, colorata
        from 3,60 €
      • Polvere di gesso tipo ceramica Artestone
        high quality casting powder, mixing ratio of powder to water is 4:1, working life: 8-10 minutes, curing time: approx. 30 min., expansion: 0.3%, surface hardness (cured): >300 N/mm², 1000 g powder result in 600 ml...
        2 Variants
        Polvere di gesso tipo ceramica Artestone
        from 8,30 €
      • Blocchi di vetro acrilico GS trasparenti, incolori
        glossy/glossy, both sides with protective film
        6 Variants
        Blocchi di vetro acrilico GS trasparenti, incolori
        from 6,50 €
      • Pasta per modellare Keramiplast
        air-dried, comes in air-tight PE foil
         
        Pasta per modellare Keramiplast
        from 5,50 €
      • Pannello in PUR SikaBlock M450 per plastici
        extremely fine pored polyurethane-based light moulding material, orange, density: 450 kg/m³; compressive strength: 10 MPa (at 10% compression set, ISO 604), flexural strength: 12 MPa (ISO 178), modulus of...
        6 Variants
        Pannello in PUR SikaBlock M450 per plastici
        from 6,30 €
      • Super Sculpey
        oven-curing modelling compound (15 min. at 130 °C), very pliable, very crack resistant
         
        Super Sculpey
        from 13,80 €
      • Polistirolo EPS 040 DEO/WAB
        multi-purpose insulation panel made of expanded polystyrene rigid foam, compression resistant (compressive stress ≥ 100 kPa per DIN EN 826), smooth edges without rim, fine pearl texture, white, approx. 16...
        6 Variants
        Polistirolo EPS 040 DEO/WAB
        from 0,95 €
      • Resina rapida poliuretano per stampi PUR G26
        2 component quick casting resin, without fillers, hard (approx. 70 Sh.D), highly impact-resistant, very low viscosity (pours very well), a substantial amount of fillers can be added, cures to an opaque beige-brown...
        4 Variants
        Resina rapida poliuretano per stampi PUR G26
        from 21,50 €
      • Alpa Sil EH 10:1
        addition-crosslinked precison silicone rubber mould material, medium soft (26 - 28 Sh-A), highly elastic, good mechanical stability, low viscosity (pours well), cures to an opaque light blue colour, mixing ratio of...
        4 Variants
        Alpa Sil EH 10:1
        from 10,50 €
      • Siringhe e cannule dosatrici
        for applying glue in the form of dots (especially Ruderer plastic glue)
        6 Variants
        Siringhe e cannule dosatrici
        from 0,20 €
      • Coloranti per resine sintetiche
        highly pigmented, intense pigment pastes that can be mixed together for colouring polyurethane, polyester and epoxy resins, is either capable of flowing or a paste depending on the colour, density at room temperature...
        7 Variants
        Coloranti per resine sintetiche
        from 4,80 €
      • Argilla Mars Clay standard, marrone
        non-drying modelling clay made from wax, fillers and pigments, can be worked with from 15 C° to 25 °C, tear-proof, polishes up well, odorless, homogenized (no air bubbles), forms hard surface and stable edges,...
         
        Argilla Mars Clay standard, marrone
        from 22,30 €
      • SikaBlock PUR  M600 modeling board
        Material
        microcellular polyurethane-based modeling material
        Colour
        light brown
        Shore-hardness
        58 Sh-D, very hard (ISO 868)
        Density
        600 kg/m³ (ISO 845)
        6 Variants
        SikaBlock PUR M600 modeling board
        from 6,70 €
      • Resina poliestere per stampi GTS, vetro chiaro
        2 component casting resin from unsaturated ortophtal acid and polyester resin and MEKP hardener, preaccelerated, medium reactivity, styrene content is 35%, without fillers, hard, very low viscosity (pours well), when...
        2 Variants
        Resina poliestere per stampi GTS, vetro chiaro
        from 19,90 €
      • Super Sculpey Living Doll
        oven-curing modelling compound (15 min. at 130 °C), very pliable, very crack resistant, miscible
        3 Variants
        Super Sculpey Living Doll
        from 14,80 €
      • Gesso per modellare
        white, comes in paper sack with foil insert
        3 Variants
        Gesso per modellare
        from 2,00 €
      • Schiuma rigida in PUR SikaBlock M80 per plastici
        fine-pored polyurethane-based rigid foam for model making, bright yellow, density: 80 kg/m³; compressive strength: 0.75 MPa (ISO 604), flexural strength: 1.2 MPa (ISO 178), modulus of elasticity: 24 MPa (ISO...
        4 Variants
        Schiuma rigida in PUR SikaBlock M80 per plastici
        from 14,50 €
      • Rinforzatore tessile Pretex
        air-drying, one-component water-based stiffener
        4 Variants
        Rinforzatore tessile Pretex
        from 17,70 €
      • Set arnesi di precisione n° 2
        steel, chromed or nickel-plated, wooden handle, l = 140 - 165 mm
         
        Set arnesi di precisione n° 2
        from 22,10 €
      • Resina per stampi/plasmare PUR U1404
        2 component casting resin, without fillers, soft to medium hard (approx. 40 to 80 Sh.A), extremely elastic, very good mechanical stability, very low viscosity (pours well), material is reddish opaque when cured,...
        5 Variants
        Resina per stampi/plasmare PUR U1404
        from 27,80 €
      Page 1 of 6
      This is Modulor
      Modulor Newsletter
      Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information