Primer especially for styrofoam and polystyrene surfaces.
Seals, supports adhesion, improves opacity
Location in Store | G1F24B |
---|---|
Article No. | 3017868-ST |
Material | Nitro combination |
Surface | beige-brown, matt |
Properties | fast drying, temperature resistant up to 80 °C |
Optimum processing temperature | +10 to +25 °C |
Equipment | Flat jet medium cap, medium pressure stage |
Montana Tech's Polystyrene Primer Spray seals styrofoam and polystyrene surfaces, enabling painting with solvent-based paint. The primer not only seals the surface, it also improves the adhesion, opacity and durability of subsequently applied coatings.
Before you apply the primer, it is definitely advisable to carry out a preliminary test on a non-visible area due to the different chemical compositions of polystyrene. If the substrate and the spray are compatible, you can start.
To cover the surface completely, it is advisable to apply the tech spray in several layers. If possible, keep a distance of at least 20 cm when spraying and allow the individual layers to dry for a few minutes between spraying. The rougher the substrate you are working on, the more coats are needed for a complete primer. Drying can take up to 24 hours, depending on the substrate and the environment. After about 3 hours, however, it is already possible to apply synthetic, nitro or acrylic-based paints. Here, too, a preliminary test on a non-visible area is recommended.
Gefahr, (VOC-Gehalt = 74,82 %; 673,4 g/l), Aceton = 5-<10%, Butan (enthält < 0,1% Butadien (203-450-8)) = 5-<10%, Butanon = ≤0,5%, Ethanol = 12,5-<20%, Fettsäuren, C18-ungesättigt, Trimere, Verbindungen mit Oleyamin = ≤0,5%, Fettsäuren, Tallöl-, Verbindungen mit Oleylamin = ≤0,5%, Isobutan (enthält < 0,1% Butadien (203-450-8)) = 2,5-<5%, Kohlenwasserstoffe C6-C7, n-Alkane, Isoalkane, Cyclene, <5% n-Hexan = 5-<10%, Kohlenwasserstoffe C7-C9, n-Alkane, Isoalkane, Cyclene = 5-<10%, Kohlenwasserstoffe, C6-C7, Isoalkane, Cyclene, <5% n-Hexan = 5-<10%, Propan = 10-<12,5%, Titan(IV)-oxid = 5-<10%, Aerosol 1, Aquatic Chronic 3, Eye Irrit. 2, STOT SE 3
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.