Double-wall for increased stability
White outer cover layer - easy to write on
Multi-layer structure for shock absorption and compressive strength
For applications with higher mechanical stress
| Article No. | |
|---|---|
| Material | paper |
| Flute type | BC flute |
| Top layer 1 | Kraftliner, 140 g/m², white |
| Corrugated sheets | Corrugating medium, 115 g/m² |
| middle layer | Schrenz, 100 g/m² |
| Top layer 2 | Testliner, 140 g/m², brown |
| Material behavior | not always completely flat; slight curves possible due to changes in humidity |
This double corrugated board with BC flute on both sides is a multi-layer corrugated board material for applications where increased stability, load-bearing capacity and protective function are required. The structure combines two different flute types - B and C flute - in one composite and thus combines a comparatively high compressive strength with a good shock-absorbing effect. The double flute structure creates a rigid cross-section that is suitable for transport, protective and intermediate layers.
The outer white top layer of 140 g/m² kraftliner provides a resistant surface that is suitable for markings, lettering or labels. At the same time, the kraftliner contributes to the tensile strength and tear resistance of the corrugated board. The inner brown top layer is also made of 140 g/m² testliner and serves as a stable opposite side in the composite. Between the top layers are the corrugated layers made of 115 g/m² corrugating medium and a middle layer made of 100 g/m² Schrenz, which completes the multi-layer structure and contributes to the overall stability.
Double corrugated board is often used where a material is required that protects contents from pressure, impact and punctual loads, for example as shipping packaging, pallet interlayer or protective board. Due to its paper-based structure, the material reacts to environmental conditions. Changes in humidity in particular can mean that the sheets do not remain completely flat. Slight curvatures or bends several millimetres high are typical of the material and are not a quality defect, but result from the hygroscopic behavior of the paper fibres.
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.
Please note that we can only ship the large size per forwarding agency which means that there are higher shipping and handling costs.
Corrugation configuration: the first measurement given as to the size of the board (length and width, e.g 1000 x 700) always refers to the dimension running parallel to the flutes. The direction of the flutes can be seen on the top and bottom liners of the board and determine its lined texture.
Double-wall for increased stability
White outer cover layer - easy to write on
Multi-layer structure for shock absorption and compressive strength
For applications with higher mechanical stress
| Article No. | |
|---|---|
| Material | paper |
| Flute type | BC flute |
| Top layer 1 | Kraftliner, 140 g/m², white |
| Corrugated sheets | Corrugating medium, 115 g/m² |
| middle layer | Schrenz, 100 g/m² |
| Top layer 2 | Testliner, 140 g/m², brown |
| Material behavior | not always completely flat; slight curves possible due to changes in humidity |
This double corrugated board with BC flute on both sides is a multi-layer corrugated board material for applications where increased stability, load-bearing capacity and protective function are required. The structure combines two different flute types - B and C flute - in one composite and thus combines a comparatively high compressive strength with a good shock-absorbing effect. The double flute structure creates a rigid cross-section that is suitable for transport, protective and intermediate layers.
The outer white top layer of 140 g/m² kraftliner provides a resistant surface that is suitable for markings, lettering or labels. At the same time, the kraftliner contributes to the tensile strength and tear resistance of the corrugated board. The inner brown top layer is also made of 140 g/m² testliner and serves as a stable opposite side in the composite. Between the top layers are the corrugated layers made of 115 g/m² corrugating medium and a middle layer made of 100 g/m² Schrenz, which completes the multi-layer structure and contributes to the overall stability.
Double corrugated board is often used where a material is required that protects contents from pressure, impact and punctual loads, for example as shipping packaging, pallet interlayer or protective board. Due to its paper-based structure, the material reacts to environmental conditions. Changes in humidity in particular can mean that the sheets do not remain completely flat. Slight curvatures or bends several millimetres high are typical of the material and are not a quality defect, but result from the hygroscopic behavior of the paper fibres.
Free standard delivery within Germany and free collection from Modulor in Berlin for orders over 89 €.
5,95 € shipping costs, if order value is less than 89 € (DE)
2,95 € for pick-up at the store in Berlin, if order value is less than 89 €
Express and forwarding shipping
From 19 € express surcharge you will receive your order particularly quickly with standard shipping within Germany.
From 69€ is the cost of shipping within Germany. You can recognize articles with forwarding shipping in the store by the truck symbol .
Especially for Berlin
From 34.90 € courier shipping for standard and forwarding goods.
- Free returns for standard shipping within Germany
- Extended, voluntary return policy of 30 days for complete, undamaged goods in their original packaging
- You are responsible for the cost of returns for forwarding goods and returns from a country outside Germany
Excluded from returns
Excluded from returns are sections of rolled goods, cut-to-size pieces and other goods made especially for you, as well as used goods, newspapers, magazines and periodicals, Modulor vouchers and items that we do not carry in our range but have ordered at your request.
Good to know: The furniture variants in our configurators that can be delivered quickly are not cut to size, but standard formats that can be returned.
Please note that we can only ship the large size per forwarding agency which means that there are higher shipping and handling costs.
Corrugation configuration: the first measurement given as to the size of the board (length and width, e.g 1000 x 700) always refers to the dimension running parallel to the flutes. The direction of the flutes can be seen on the top and bottom liners of the board and determine its lined texture.