Scorri verso l'alto
Ricercare
      Categorie
      Prodotti
      Sto cercando i prodotti...
      La ricerca di »« non ha prodotto risultati.
      E2 Tavolo
      Salvare bozza
      Richiedi offerta
      1

      Misura

        Lunghezza cm
        Profondità cm
        Conferma & continua
        Conferma & continua
        2

        Piastra

          Superficie
          Bordo
          • In vero legno
          • Plastica (ABS)
          Spessore della piastra


          Superficie
          Bordo
          • Rivestimento del bordo (Nucleo: pannelli stratificati)
          • Bordo lucidato (Betulla multiplex / MDF)
          Angolo
          Foro cavo
          Posizione longitudinale cm
          Posizione trasversale cm
          Conferma & continua
          Conferma & continua
          3

          Telaio

            Altezza


            Colore
            Piedini
            Stanghe a croce
            Conferma & continua
            Stanghe a croce
            Conferma & continua
            4

            Accessori

              Optional
              Pronto
              Optional
              Pronto
              • Cliccare e muovere per una rotazione a 360°
              • Scorrere
                per fare zoom
              • Front
              • Prospettiva
              Salvare bozza
              IVA inclusa, spedizione esclusa
              +
              Aggiungi al carrello
              Richiedi offerta

              If you need to be quick

              For those in a hurry, we offer a special selection of tables that are immediately available. These E2 series classics are with you in one to three days.

              Save draft

              Design your E2 table, save, and send your draft to your email. Finalize it whenever you want.

              We are here for you

              If you have any questions about specific configurations or materials, please feel free to contact us via our live chat.

              Table top
              Table frame

              Maximum dimensions

              240 cm x 110 cm

               

              Thickness

              Melamine table top with edge veneer
              19 mm or 28 mm

              Linoleum table top with edge veneer
              30 mm

              Linoleum table top with ground Multiplex Birch core
              20 mm or 26 mm

              Linoleum table top with ground MDF core
              21 mm

              Corner radius

              Table top with edge veneer
              3 mm

              Linoleum table top with polished edge
              3 mm, 25 mm or 50 mm

               

              Overhang table frame

              How many centimetres the table top protrudes on all sides depends on the size of the table frame. The overhang can be derived from the following sizes:

              Length
              110 cm – 149 cm table top length = 100 cm cross brace length
              150 cm – 240 cm table top length = 135 cm cross brace length

              Width
              70 cm – 79 cm table top width = 60 cm side frame length
              80 cm – 89 cm table top width = 70 cm side frame length
              90 cm – 120 cm table top width = 78 cm side frame length

              Configurate your E2 table

              Over time, the E2 has become the standard table for architects, artists, and designers. A simple, but well thought-out steel pipe construction with a table top that pretty much sits loose, a stable and long-lasting work table hen as well as now. With matching accessories, cable and PCs can be mounted with ease, the table height variable changed, or a drawing table created with an angled table top.

              Affordable Classic

              The E2 design comes from Adam Wieland and is derived from the original design by Egon Eiermann in 1953.

              Table made of steel pipes

              The timeless steel pipe construction with a distinctive cross strut is a rugged lightweight. Quick assembly and disassembly.

              Ergonomic sitting position

              With the height adjusters, the E2 table adjusts very easily to a perfect seating or even standing height.

              Also as a drawing table

              E2 with a diagonal table top? Using the height adjusters, you can transform the E2 into a drawing table.

              A table made of steel pipes

              The table frame of the E2 series is made of 21.3 mm thick steel pipes. An E2 table frame consists of two side sections and the characteristic cross strut common in this series. Both are screwed together at only four points. Therefore, the table can be put together and taken apart quickly, as well as stored easily. The functional and well thought-out design of the steel pipes ensures stability and, at the same time, a very lightweight table.

              With the exception of the galvanized and chrome versions, the steel pipe frame is powder-coated. The chrome-plated frame is more expensive to make because the steel pipes are immersed in an electrolytic bath during galvanic processing.

              The matching table top for the E2 table

              The table frame of the E2 series can be combined with a high-quality, natural linoleum or solid melamine table top. If you choose a linoleum table op, you have, among other things, the choice between a straight or tapered edge, as well as rounded corners. There are no limits to the number of configurations, and you can create charming E2 tables, for example, from a table top with a natural real wood edge and raw-looking, colorless E2 table frame design.

              To ensure thinner tops don't begin to droop when longer than about 150 cm, we recommend using table top supporter designed for this purpose. This applies, in particular, to our thin melamine table top, the thin linoleum tabletop with a multiplex birch core, and the linoleum tabletop with an MDF core.

              Cross strut positioning

              The steel pipe construction of the table tops for the E2 table can reliably support a weight of about 50 kg. Generally, is the table top is loosely fitted using the push plugs at the end of the side sections. If you want to make sure the table top on the frame, you can use what is called a top support.

              The E2 table can also be used as a conference or dining table. What makes this possible is the positioning of the prominent cross strut. If you're looking for a group table for meetings or the breakroom, we recommend a centrally positioned cross strut. In the classical use of the E2 from one side - i.e., a work top or desk - we recommend a cross strut that is positioned closer to one side. This provides more legroom.

              Good to know: The position of the cross strut cannot be changed. Each side section is the only part with holes for one of the two positions.

              Height adjustment and ergonomic seats

              We offer the E2 table in two heights (approx. 69 cm and 75 cm). The standard frame height is 66 cm or 72 cm. The low original frame height stems from a time when the E2 was used as a drawing table with an angled table top. The height allows you to reach the rear section of the table top better. It's also suitable for smaller people and an ergonomic seating posture.

              Here's how it works: Create an E2 table with an angled table top.

              With height adjusters, you can not only have tapering but also straight, ergonomic tables. Depending on the body size, choose the appropriate starting level for your purpose, and let it grow to the appropriate height growth with long or short height adjusters (simply add in the configurator). Large work desks or tables with a height of approx. 98 cm can be built with the initial height of 75 cm and long height adjusters.

              Short Height Adjusters
              –  2.6 cm to 8.8 cm increase in the table
              –  Height adjustment in 2 cm steps (4 holes 2 cm apart)

              Long Height Adjusters
              – 4.6 cm to 22.8 cm increase in the table
              – Height adjustment in 4 cm steps (5 holes 4 cm apart)

              Practical E2 Accessories

              If you want to use the E2 as a working table or desk, both the table top as well as the table frame can be extended with practical accessories (simply add in the configurator). A cable passage can be used for cable bundles or serve as a mounting for your coffee mug or pen holder. The ends of the cables and multiple sockets can be hidden away in the passage. It has the same color as the table frame.

              If you don't want to put your PC tower or large storage boxes on the floor, you can use a simple bracket made of sturdy belt straps directly on the table frame. To tuck away small items such as pens, paper, hand cream, and sweets, and also mobile phones, tablets, and laptops, you can add a narrow desk drawer, positioned discreetly on the underside of the table top. The highlight of the entire form: the wheels that make the E2 table mobile.

              The E2 table for children and young adults

              A table that grows with kids. The E2 series offers a practical table for children and young adults, using height adjusters to adjust the size of the body. Starting at 55 cm, the height adjusters the table frame to a height of up to 72 cm.

              Mounting instruction of the E2 table frame

              Useful accessories

              A peek under the table top: How big is the E2 table base frame?

              Regardless of the table height, we offer the cross strut of the E2 table frame in two lengths and the side sections in three lengths.

              If you decide on a table top with a length up to and including 149 cm, the matching table frame has a length of 100 cm. In the case of a table top length between 150 cm and 240 cm, the table frame is 135 cm long. Depending on the specific length of the table top, the distance between the frame and the edge will vary.

              The choice of table top width is reflected in the size of the side sections of the frame. If you decide on a table top with a width up to and including 79 cm, the matching sides are 60 cm long. In the case of a table top width between 80 cm and 89 cm, the side sections have a length of 70 cm. Table tops with a width between 90 cm and 120 cm are combined with 78 cm sides. Also here –  similar to the length of the table – is the distance between the frame and the edge sometimes more, sometimes less.

              Already have a table top? How to configure the appropriate table frame

              If you have an E2 for an already existing table frame, the following information will help you configure the correct dimensions.

              In order to get the table frame with the desired dimensions, you can store a dimension in the configurator that corresponds to your preferred frame size. For example, if you want to order a 135 cm long and 70 cm wide table frame, select a measurement between 150 - 240 cm in length and 80 - 89 cm in width in the configurator. Then you'll only have to click "No" under "Top," and the E2 table frame is configured.

              Cross strut
              100 cm frame length = 110 cm to 149 cm table top length
              135 cm frame length = 150 cm to 240 cm table top length

              Sides
              60 cm frame width = 70 cm to 79 cm table top width
              70 cm frame width = 80 cm to 89 cm table top width
              78 cm frame width = 90 cm to 120 cm table top width

              E2 table with an angled table top

              If you want to build an E2 drawing table with a slanted table top, there are two possibilities.

              Angled position without fixation
              The first option is to place the front edge of your table top on the horizontal struts of the two side sections. This way, there is already a 2-degree inclination. The rear section of the table top lies loosely on height adjusters. They can be used to achieve an inclination of up to 19 degrees.

              Inclined position with fixation
              If you do not want to place the table top on the sides of the table, but wish to fix it to the table frame, you will need mountings for angled tops. The two rear mountings are screwed to the table top and, at the same time, plugged into the two rear height adjusters (remove the plug beforehand). The front part of the table top can lie loosely on the side sections and/or height adjusters.

              Good to know: The inclined position with fixation can only be used with inclined table top mountings. It is not possible to screw the table top with reinforcing top holders, because they do not adapt to the angles.

              Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information
              Benvenuto su Modulor
              CON o SENZA IVA?
              Su Modulor puoi fare acquisti come cliente aziendale (senza IVA)
              o come cliente privato (con IVA)
              Si prega di scegliere:
              Cliente aziendale
              senza IVA
              Cliente privato
              con IVA