0
Carrello
My Account
B2B
Negozio
      Categories
      Prodotti
      searching for products ...
      There is no result for »askldhasd«.

      Fondere

      Further info

      Materiale

      Applicazione

      Gruppo colore

      Marchio

      Price

      37 article   /   95 Variants
      Page 1 of 2
      Sort by: Relevance
      • Relevance
      • Topseller
      • Price - lowest first
      • Price - highest first
      View
      • Resina rapida poliuretano per stampi PUR G 27
        2 component quick casting resin, without fillers, hard (approx. 70 Sh.D), highly impact-resistant, very low viscosity (pours extremely well), a substantial amount of fillers can be added, odorless, cures to an opaque...
        4 Variants
        Resina rapida poliuretano per stampi PUR G 27
        from 20,50 €
      • Coloranti per resine sintetiche
        highly pigmented, intense pigment pastes that can be mixed together for colouring polyurethane, polyester and epoxy resins, is either capable of flowing or a paste depending on the colour, density at room temperature...
        7 Variants
        Coloranti per resine sintetiche
        from 4,80 €
      • Resina rapida poliuretano per stampi PUR G26
        2 component quick casting resin, without fillers, hard (approx. 70 Sh.D), highly impact-resistant, very low viscosity (pours very well), a substantial amount of fillers can be added, cures to an opaque beige-brown...
        4 Variants
        Resina rapida poliuretano per stampi PUR G26
        from 21,50 €
      • Resina acrilica  laminatura/stampiAcrylstal Prima
        two component water-based acrylic resin system for casting, laminating and coating, for interior as well as protected exterior spaces, hard (81-83 Sh-D hardness), impact resistant, odourless, material is opaque white...
        4 Variants
        Resina acrilica laminatura/stampiAcrylstal Prima
        from 26,60 €
      • Gesso per modellare
        white, comes in paper sack with foil insert
        3 Variants
        Gesso per modellare
        from 2,00 €
      • Resina per stampi/plasmare PUR U1404
        2 component casting resin, without fillers, soft to medium hard (approx. 40 to 80 Sh.A), extremely elastic, very good mechanical stability, very low viscosity (pours well), material is reddish opaque when cured,...
        5 Variants
        Resina per stampi/plasmare PUR U1404
        from 27,80 €
      • Resina poliestere per stampi R & G, vetro chiaro
        2 component casting resin from unsaturated ortophtal acid polyester resin and MEKP hardener, preaccelerated, medium reactivity, styrene content is 35%, without fillers, hard, very low viscosity (pours well), when...
        2 Variants
        Resina poliestere per stampi R & G, vetro chiaro
        from 12,20 €
      • Polvere di gesso tipo ceramica Artestone
        high quality casting powder, mixing ratio of powder to water is 4:1, working life: 8-10 minutes, curing time: approx. 30 min., expansion: 0.3%, surface hardness (cured): >300 N/mm², 1000 g powder result in 600 ml...
        2 Variants
        Polvere di gesso tipo ceramica Artestone
        from 8,30 €
      • Resina poliestere per stampi GTS, vetro chiaro
        2 component casting resin from unsaturated ortophtal acid and polyester resin and MEKP hardener, preaccelerated, medium reactivity, styrene content is 35%, without fillers, hard, very low viscosity (pours well), when...
        2 Variants
        Resina poliestere per stampi GTS, vetro chiaro
        from 19,90 €
      • Siringhe e cannule dosatrici
        for applying glue in the form of dots (especially Ruderer plastic glue)
        6 Variants
        Siringhe e cannule dosatrici
        from 0,20 €
      • Creastone concrete casting compound
        Mixing ratio
        10:1
        100 gr powder
        50 ml casting compound
        Hardening time
        2 - 3 days
        Paintable
        1 - 2 days after demoulding
        2 Variants
        Creastone concrete casting compound
        from 5,90 €
      • Spatole per mescolare in legno
        l = 150 mm, w = 20 mm, for stirring resin preparations of up to about 500 g
        2 Variants
        Spatole per mescolare in legno
        from 0,95 €
      • Gutenberg Wappenlack (Siegellack)
        l = 130 mm, contains colophonium, hazard warning: Xi caustic
        5 Variants
        Gutenberg Wappenlack (Siegellack)
        from 3,40 €
      • Mescolatori in polietilene
        polyethylene single-use mixing cups (HDPE), translucent, colourless, opening diameter: 82 mm (250 ml), 106 mm (600 ml), inner walls and bottom are smooth
        2 Variants
        Mescolatori in polietilene
        from 4,90 €
      • Biothan/Biodur 1785/330 casting resin, hard
        Material
        two component polyutethane casting resin
        Colour
        colourless, transparent when hardened
        Shore-hardness
        hard (ca. 83 - 85 Sh-A)
        Mixing ration
        resin to hardener ca. 1 : 2,5
        2 Variants
        Biothan/Biodur 1785/330 casting resin, hard
        from 26,90 €
      • Biothan / Biodur 1770/330 casting resin, soft
        Material
        two component polyutethane casting resin
        Colour
        colourless, transparent when hardened
        Shore-hardness
        soft ((ca. 40 - 70 Sh-A)
        Mixing ration
        resin to hardener ca. 1,5-2,5 : 1
        2 Variants
        Biothan / Biodur 1770/330 casting resin, soft
        from 44,90 €
      • Agente distaccante idrosolubile per stampi,b.visc.
        dyed to a reddish colour, polyvinyl alcohol-based; resistant to numerous solvents, styrol and benzene; ready-to-use, apply with cloth or brush, flash-off time: 15-20 minutes, Xi (= irritant), F (= highly flammable)
         
        Agente distaccante idrosolubile per stampi,b.visc.
        from 3,30 €
      • Materiale da riempimento (sferette cave di vetro)
        grey, powdery form, grain size is 0.01 - 0.25 mm, density is 0.6 g/cm³, (powder density is 0.4 g/cm³)
        2 Variants
        Materiale da riempimento (sferette cave di vetro)
        from 4,30 €
      • Resina epossidica, limpida
        cold-curing, two-component casting resin consisting of bisphenol A-epichlorohydrin and epoxy hardener with polyoxyalkyleneamine, unfilled, hard, very low viscosity (very pourable), cured material is colourless and...
        4 Variants
        Resina epossidica, limpida
        from 16,70 €
      • Gesso a base di resina Gedeo
        extra hard, high-quality alpha plaster, synthetic resin bonded, bright white, fine grained, non-clumping, mixing ratio of powder to water is 3:1; setting time is 8 – 15 minutes, demoulding time is 30 minutes,...
         
        Gesso a base di resina Gedeo
        from 9,90 €
      • Agente ritardante Acrylstal
        retarding agent for the two component acrylic resin system, liquid, transparent, colourless, odourless, non-toxic, mixing ratio (as percentage of weight): 0.2 – 0.3 % of the acrylic resin mixture.
         
        Agente ritardante Acrylstal
        from 13,90 €
      • Recipiente in gomma per gesso
        elastic soft plastic, black, round, ø 130 mm
         
        Recipiente in gomma per gesso
        from 0,95 €
      • Agente distaccante pastoso per stampi
        wax dispersion with paste consistency, silicone-free, halogen-free, colourless when dried, ready-to-use for application with brush or rag, flash-off time: 15-20 minutes, polishes well, uses 50 – 100 g per sq....
         
        Agente distaccante pastoso per stampi
        from 3,60 €
      • Pigmenti per resina acrilica Acrylstal Prima
        liquid paint with high pigmentation and brilliancy for colouring the two component acrylic resin system, non-fading, solvent-free, odourless
        5 Variants
        Pigmenti per resina acrilica Acrylstal Prima
        from 18,50 €
      • Resina velo Gedeo
        2-component epoxy resin casting material, transparent and colourless, mixing ratio of resin to water is 2:1, curing time: 6 hours for the surface, 12 hours for the core, shelf life when properly stored: minimum of 6...
         
        Resina velo Gedeo
        from 19,00 €
      • Occhiali di protezione, standard
        polycarbonate, with integral side protection, can also be worn as overglasses
         
        Occhiali di protezione, standard
        from 4,00 €
      • Silicone Spray Weicon
        hazard warnings: Xi irritant, F+ extremely flammable, N dangerous for the environmentP>
         
        Silicone Spray Weicon
        from 6,60 €
      • Agente tissotropico Acrylstal (addensante)
        thickening agent for two component acrylic resin systems, thixotropic, no odour, non-toxic, mixing ratio (as percentage of weight): 1-2 % of the acrylic mixture.
         
        Agente tissotropico Acrylstal (addensante)
        from 19,90 €
      • Gesso duro Gedeo
        a harder and higher quality alpha plaster for artistic castings, course grain, does not clump; mixing ratio of powder to water is 2.5:1, setting time is 8 – 15 minutes, demoulding time is 30 minutes, takes...
         
        Gesso duro Gedeo
        from 7,70 €
      • Guanti monouso in latex
        examination gloves, lightly powdered with corn starch, good quality
        3 Variants
        Guanti monouso in latex
        from 0,35 €
      • Allumina
        white, dust-free, powdery form, grain size is 0 - 0.032 mm, density is 2.4 g/cm³ (powder density is 1.2 g/cm³)
        2 Variants
        Allumina
        from 5,30 €
      • Moulding set
         
        Moulding set
        from 30,50 €
      • Gesso da restauro Gedeo
        specialized plaster for restoration purposes, very viscous, strong adhering qualities on practically all materials, will not drip even on vertical surfaces, easy to rework; mixing ration of powder to water is 2:1,...
         
        Gesso da restauro Gedeo
        from 8,40 €
      • Resina madreperlata Gedeo
        2-component epoxy resin casting material, opaque, waterproof and UV resistant, mixing ratio of resin to water is 2:1, curing time: 12 hours for the surface, 24 hours for the core, shelf life when properly stored:...
        3 Variants
        Resina madreperlata Gedeo
        from 14,50 €
      • Resina cristallina Gedeo, trasparente
        2-component epoxy resin casting material, transparent, colourless, waterproof and UV resistant, mixing ratio of resin to water is 2:1, curing time: 12 hours for the surface, 24 hours for the core, shelf life when...
        3 Variants
        Resina cristallina Gedeo, trasparente
        from 13,20 €
      Page 1 of 2
      This is Modulor
      Modulor Newsletter
      Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information