Basis: synthetic elastomer-based, Use: for permanent bonding
3 Varianti
Ponal Express
da 6,50 €
material: fast setting water-based wood glue (white glue), Use: 150 g/m², application pressure must be at least 15 N/cm² (approx. 1.5 kg/cm²), at 20 °C leave open maximum 10 minutes
2 Varianti
Diclorometano (cloruro di metilene)
da 7,50 €
Intended use: organic solvent, adhesive for polystyrene, acrylic glass (XT and GS), polycarbonate, ABS and PET-G, Molecular weight: 84.93 g, Melting point: -97° C
2 Varianti
Colla per plastica Ruderer L 530
da 3,90 €
Ruderer L530 bzw. Technicoll 8008, toluol-free, transparent, colourless
Colla Uhu Por per polistirolo espanso/rigido
da 6,50 €
Product description: Contact adhesive, Use: especially suitable for PS rigid foam (polystyrene)
Adesivo spray 3M Display Mount
da 15,00 €
Basis: synthetic elastomer-based
4 Varianti
Colla Tesa attaccatutto
da 1,00 €
contains solvent, transparent, yellowish, waterproof, aging-resistant, rubs off of the skin
transparent, colourless, for precise and fine gluing with a hollow needle
Attivatore spray per cianoacrilati Weicon
da 11,20 €
inductor (catalyst) for all commercial super glues, colourless
Ponal
da 7,50 €
water-based wood glue (white glue), solvent-free, at 20 °C leave open maximum 15 minutes, translucent when set, short term water resistant (D2), uses approx. 150 g/m², application pressure must be at least 15...
Colla super istantanea Uhu minis, 3 x 1 g.
da 5,20 €
cyanacrylate glue, thin fluid, colourless when dry, plastic storage box with safety fastener
Colla spray Weicon, permanente
da 13,90 €
for permanent joints; adhesive based on synthetic elastomers (rubber), cream coloured, limited use on polystyrene foam possible, open time (working time) is 30 minutes maximum
Colla da costruzioni Weicon RK - 1500
da 21,30 €
two component methacrylate-based reaction adhesive, high strength adhesion, residual elasticity, utilized with the "no mix process" (no mixing!), transparent, colourless, temperature resistant from -40 °C to +130...
Colla spray Weicon, extra forte
da 13,90 €
for durable and permanent joints; adhesive based on synthetic elastomers (rubber), adjustable spray pattern, cream coloured, NOT suitable for polystyrene foam, open time (working time) 45 minutes maximum
Contact-Primer Weicon
da 13,20 €
cyanoacrylate adhesive pretreatment for "unglueable" or difficult to glue plastics such as PP and PE
Contents of set: 2 g adhesive + 4 ml activator , Colour: colourless, transparent
Colla di riempimento Weicon
da 5,40 €
light filler, glass-hard, white
✖
Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies. More information
