Polietileno (PE)

isotropic hard ferrite 4/24p, mixed with flexible plastic (PE) binder, front side with permanent adhesive, reverse side is magnetic, high adhesive strength (0.55 N/cm²), th = 1.0 mm

polyethylene, adjustable, locks in place, length scale, black carrying strap, black ring, threaded top with labelling field

polyethylene, translucent, twist top

polyethylene single-use mixing cups (HDPE), translucent, colourless, opening diameter: 82 mm (250 ml), 106 mm (600 ml), inner walls and bottom are smooth

the non-magnetic side is covered in coloured PVC, semi-gloss, high adherence strength, th = 0.85 mm

semi-anisotropic hard ferrite 5/18p, mixed with flexible plastic (PE) binder, non-magnetic side has self-adhesive coat, high adhesive strength (0.40 N/cm²), th = 0.75 mm, weight is about 3,5 kg/m²

closed cell PE foam, adhesive: rubber-based, temperature resistant up to ca. 65 C°, on silicone paper, given dimensions: height x length x width

polyethylene, translucent, twist top

polyethylene, black, opaque, adjustable length, can be locked into place, black, adjustable nylon carrying strap or, alternatively, a small white strap for hanging, lockable snap-on lid (case length is 630-1020 mm)...

LD-PE, translucent, colourless, glossy, nubs ø 10.0 mm, nub height = 3.0 mm, two ply, wrapped around a cardboard tube ø 76 mm

polyethylene, translucent, screws together in the middle

isotropic hard ferrite, mixed with flexible plastic (PE) binder, reverse side with permanent adhesive, front side is magnetic, th = 0.6 mm, 20 x 30 mm, comes on silicone paper

non-magnetic side coated with coloured PVC, semi-gloss, high adhesive strength (0.40 N/cm²), th = 0.85 mm, weight is about 3 kg/m²

LD-PE, glossy, UV- stabile, 4 layer (w = 4000 mm folded at 1 m), wrapped around cardboard tube ø 76 mm

polyethylene crosslinked by irradiation, semi-gloss, shrinkage rate 50%, minimum temperature for shrinking 120 °C, changes lengthwise by shrinking ± 10 %, permanent temperature resistance -55 to +105 °C,...

isotropic hard ferrite, mixed with flexible plastic (PE) binder, reverse side with permanent adhesive (without release paper), front side is magnetic, adhesive strength 0.12 N/cm², th = 0.35 mm, hand dispenser made...

plastic, adjustable jet, various colours

the non-magnetic side is paper coated, matte, adhesive strength 0,12 N/cm², th = 0,3 mm

fibres from 100% polyethylene, approx. 3 cm long, on a stabile woven carrier out of rayon calico

LD-PE, colourless, glossy, wrapped around cardboard tube ø 76 mm

LD-PE, glossy, 4 layer (folded at 1.0 m), wrapped around cardboard tube ø 76 mm

LDPE, translucent,colourless, glossy, bubble diameter is 10 mm, bubble height is 3.0 mm, two-ply

woven polyethylene sheath; solid elastic rubber core, plastic covered steel hooks, hook opening is about 14 mm, given length includes the hooks

fibres are 100% polyethylene, approx. 1 cm long, on a fleece carrier that is a viscose/polyester blend

Polyethylene, approximates Form C, given dimensions: width of the material x inner length of link x outer width of link

Polyethylene, 25 m version comes on plastic spool, diagonally running stripes: “right pointing” (see “information”).

green colour, straight grass fibers made of PE monofilament, wavy grass fibres made of PE monofilament, the carrier mat is latex coated on the back, UV stabilized

low density PE, transparent, colourless, glossy, wound on a cardboard tube which is ø 76 mm, weight of one roll is 3,5 kg

100% polyethylene, glossy/matte, atlas weave, machine washable up to 30 °C

non-magnetic side coated with white PVC, semi-gloss, high adhesive strength (0.40 N/cm²), th = 0.85 mm, weight is about 3 kg/m²

12-plait braided HMPE (high-performance (modulus) polyethylene) sheath, PU coated, no core, breaking strength is 980 daN