Bases de corte de primera calidad, tamaño estándar
de 5,40 €
material: inner layer made from hard PVC, top layer from soft PVC, Material layers: 3-layered (transparent) or 5-layered (green/black), Material strength: 3 mm, Features: Both sides (green/black) or one side (translucent) printed with grid design and cm graduation
46 Variedades
Vidrio acrílico GS de color, 3 mm
de 1,90 €
material: Plexiglas brand acrylic glass
27 Variedades
Plancha de espuma rígida/PVC Forex Classic, blanca (corte disponibiles)
de 1,20 €
semi-gloss/semi-gloss, one side with protective film, flame resistant in compliance with DIN 4102 B1 (German Industry Norm)
3 Variedades
Espuma rígida poliestireno, blanca, no recortada
de 14,80 €
Edges: straight, Density: approx. 33 kg/m³
63 Variedades
Chapa Decoflex
de 2,50 €
material: real wood veneer with paper backing, Classic quality: architectural grade: anigre, bubinga, ash, Oregon pine, padauk, red elm, teak, wengé and zebrano; commercial-grade: gabonese wo ...
13 Variedades
Vidrio acrílico de precisión, transp., incoloro
de 5,20 €
Thickness tolerance: ± 0.1 mm for sheets up to th=1.0 mm, ± 0.2 mm for sheets from th=1.5 mm
glossy/glossy, both sides with protective film, coloured faces, luminous edges
6 Variedades
Tablero de fibra MDF fino
de 2,10 €
material: medium density fibreboard, Strength tolerance: ± 0.2 mm
15 Variedades
Vidrio acrílico GS, transparente, incoloro
de 1,10 €
glossy/glossy, both sides with protective film
13 Variedades
Esfera de caucho esponjoso, blanca
de 0,19 €
material: NR foam, Quality: B 63, RG 350
22 Variedades
Vidrio acrílico de precisión, transp., de color
de 6,90 €
glossy/glossy, cast, thickness tolerance of ± 0.1 mm, both sides with protective film, all edges trimmed
37 Variedades
Barra redonda de vidrio acrílico XT, incolora
de 1,70 €
transparent, colourless, glossy
5 Variedades
Plancha de vidrio acrílico XT, transp., incolora recorte
de 31,00 €
glossy/glossy, both sides with protective film, all edges trimmed
11 Variedades
Esfera hueca de poliestireno, transparente
de 0,60 €
material: polystyrene
30 Variedades
Espuma de poliuretano para filtros, negra
de 2,90 €
Density: approx. 30 kg/m³
22 Variedades
Cuadradillo de haya
de 0,70 €
11 Variedades
PVC rígido, transparente, incoloro
de 0,80 €
glossy/glossy
18 Variedades
Kapa line, forrado de cartulina, blanco
de 3,90 €
light-coloured PUR rigid foam core covered on both sides with matte, white pigmented chromo board
18 Variedades
Lámina de PET-G, transparente, incolora
de 1,80 €
glossy/glossy, both sides with protective film, flame resistant in compliance with DIN 4102 B1 (German Industry Norm)
5 Variedades
Semiesfera hueca de PVC, transparente
de 3,90 €
Brim: yes, Dimensions: given dimensions = outer diameter
60 Variedades
Árboles de hoja caduca grabados al ácido
de 1,70 €
etched brass framework, dipped and flocked, given measurement is approximate height of the tree
11 Variedades
Tubo redondo de papel endurecido, marrón
de 7,20 €
Dimensions: inner diameter x wall thickness
8 Variedades
Chapa sobre papel Microwood, de dos caras
de 3,30 €
material: real wood veneer with paper backing, Bonding: glued to one another with an additional later of paper in between, Veneer thickness: approx. 0.1 mm, total thickness depending on the type of wood is 0.4 - 0.55 mm
4 Variedades
Lámina LS de plexiglás XT, translúcida, blanca
de 3,90 €
white 99532, semi-gloss/glossy, both sides with protective film
3 Variedades
Ponal Express
de 5,90 €
material: fast setting water-based wood glue (white glue), Use: 150 g/m², application pressure must be at least 15 N/cm² (approx. 1.5 kg/cm²), at 20 °C leave open maximum 10 minutes
20 Variedades
Styrofoam azul claro, recortado
de 1,50 €
Edges: straight, Density: approx. 52 kg/m³
8 Variedades
Barra redonda de ASA, blanca
de 1,85 €
matte
19 Variedades
Barra redonda de latón
de 1,05 €
Material: brass
10 Variedades
Kapa fix, blanco, con una cara autoadhesiva
de 19,00 €
Lamination: covered on one side with white PE film
9 Variedades
Semiesfera hueca de vidrio acrílico, transparente
de 33,00 €
material: acrylic XT glass, Brim: circumferentially machined 15-20 mm, Strength: given thickness = initial thickness
Intended use: organic solvent, adhesive for polystyrene, acrylic glass (XT and GS), polycarbonate, ABS and PET-G, Molecular weight: 84.93 g, Melting point: -97° C
Mostrar más artículos
Esto es Modulor
Modulor Newsletter
✖
Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies. More information
