Entrega puntual hasta antes de Navidad para pedidos realizados hasta el 18/12 (DE).

Hacia arriba
      Se están encontrando productos ...
      Desgraciadamente la búsqueda de »« no ha tenido resultados.




      Grupo de color


      8 Artículo   /   23 Variedades
      Clasificación: Relevancia
      • Relevancia
      • Topseller
      • Precio creciente
      • Precio decreciente
      • Ventosa con rosca exterior
        3 Variedades
        Ventosa con rosca exterior
        de 0,55 €
        material: soft PVC, equipment: with moulded steel screw, galvanised
      • Ventosa con gancho
        5 Variedades
        Ventosa con gancho
        de 0,25 €
        soft-PVC, transparent, colourless, Shore hardness about 65 Sh-A, with moveable polycarbonate hook or nickel-plated steel hook
      • Ventosas especiales
        2 Variedades
        Ventosas especiales
        de 0,25 €
        soft-PVC, transparent, colourless, Shore hardness about 65 Sh-A
      • Tuerca moleteada
        3 Variedades
        Tuerca moleteada
        de 0,30 €
        polyamide (PA) or polycarbonate (PC)
      • Ventosa con agujero transversal
        2 Variedades
        Ventosa con agujero transversal
        de 0,30 €
        soft-PVC, transparent, colourless, Shore hardness about 65 Sh-A
      • Ventosa con botón
        5 Variedades
        Ventosa con botón
        de 0,15 €
        soft-PVC, transparent, colourless, Shore hardness about 65 Sh-A
      • Bola con rosca interior
        Bola con rosca interior
        de 1,20 €
      • Ventosa con agujero vertical
        2 Variedades
        Ventosa con agujero vertical
        de 0,15 €
        soft-PVC, transparent, colourless, Shore hardness about 65 Sh-A
      Información sobre Ventosas

      Suction cups stick to very smooth surfaces like glass, glossy tiles or varnished wood. Even matte bathroom tiles, it should be noted, will negatively effect their adhesive strength.

      In order to attain a good amount of adhesive strength, both the intended surface and the suction cup should be cleaned with glass cleaner to remove any grease or other impurities. The suction cups should be pressed into place after the surface and cups themselves are clean and dry. Contrary to the supposed common knowledge, suction cups should NOT be applied when wet.

      When correctly applied, the suction of the cups should hold for 4 – 5 years. This is not affected by the yellowing of the soft PVC, which begins after about 2 years..

      If transparent suction cups are attached to an auto’s windscreen, it can be that under the influence of intense sunshine a burning-glass effect will result which can burn a hole in the dashboard. This undesirable side effect can be avoided by simply employing the opaque versions of the cups.

      Also interesting: the most efficient retention force proportionate to size is found with the suction cups with a diameter of 40 mm. If the air remaining under a suction cup expands as a result of, for example, being heated, the smaller suction cups will lift off of the surface. In the case of the 40 mm suction cups, however, their surface area is large enough that the suction will hold. This is especially noteworthy in the case of display windows and windscreens which are exposed to a great many temperature swings.

      Esto es Modulor
      Modulor Newsletter
      Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information