Scorri verso l'alto
Categorie
Ricercare
      Categorie
      Prodotti
      Sto cercando i prodotti...
      La ricerca di »« non ha prodotto risultati.

      Macchine a mano

      Applicazione

      Marchio

      Prezzo

      45 Articolo   /   72 Varianti
      vista
      Classificazione: Rilevanza
      • Rilevanza
      • Topseller
      • Prezzo crescente
      • Prezzo decrescente
      • Interruttore a pedale Proxxon FS
         
        Interruttore a pedale Proxxon FS
        da 16,90 €
        fibreglass reinforced nylon housing, with 2.5 m long connecting cable and 50 cm long output cable
      • Steinel hot air tool HL 1620 S
         
        Steinel hot air tool HL 1620 S
        da 45,00 €
        Output: 1600 watt, Voltage: 230 volt, Temperature adjustable at 2 levels: 300, 500 °C, Air volume: 240, 500 l/min
      • Punte elicoidali HSS Proxxon per trapano
        2 Varianti
        Punte elicoidali HSS Proxxon per trapano
        da 5,20 €
        HSS (per DIN 338) twist drill, short, cylindrical, right-side cutter
      • Tagliapolistirolo a caldo  Proxxon Thermocut 12/E
         
        Tagliapolistirolo a caldo Proxxon Thermocut 12/E
        da 39,90 €
        plastic housing, pivotable and extendable wire fixing element, infinitely variable cutting temperature, power cord is 0.5 m Output: 60 W Voltage: 12 V Working temperature: adjustable from about 150 °C –...
      • Steinel HL 1920 E heat gun
         
        Steinel HL 1920 E heat gun
        da 72,10 €
        Output: 2000 Watt, Voltage: 230 Volt, Temperature adjustable at 9 levels: 80 - 600 °C, Air volume set at three different levels: 150, 300, 500 l/Min
      • Punte elicoidali trapano Proxxon vanadio/tungsteno
        5 Varianti
        Punte elicoidali trapano Proxxon vanadio/tungsteno
        da 3,95 €
        purpose-made and selected wolfram vanadium steel, shafts and drill tips manufactured from one-piece blanks, shaft ø 2.35 mm, l (total) = 44 mm
      • Dischetti per troncare Proxxon al corindone
        3 Varianti
        Dischetti per troncare Proxxon al corindone
        da 2,80 €
        manufactured with a special bonding agent, with tool carrier shaft ø 2.35 mm (except Proxxon No. 28812), given dimensions: ø x thickness
      • Trapano fresatore Proxxon FBS 240/E
         
        Trapano fresatore Proxxon FBS 240/E
        da 67,60 €
        sturdy fibreglass-reinforced polyamide housing with comfort sections in the grip area and a 20 mm collar that fits to the Micromot system components, spindle runs in precision ball bearing and is fitted with a lock...
      • Dischetti per troncare Proxxon, ossido d'alluminio
        2 Varianti
        Dischetti per troncare Proxxon, ossido d'alluminio
        da 4,20 €
        woven fabric bond, with tool carrier shaft ø 2.35 mm (except Proxxon No. 28809), given dimensions: ø x thickness
      • Molette e spazzole lucidatrici Proxxon
        2 Varianti
        Molette e spazzole lucidatrici Proxxon
        da 3,00 €
        various versions made of cotton, chamois and felt; shaft diameter is 2.35 mm
      • Lame per troncare Proxxon in acciaio per molle
         
        Lame per troncare Proxxon in acciaio per molle
        da 3,90 €
        with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness
      • Spazzole circolari Proxxon in vello di nylon
         
        Spazzole circolari Proxxon in vello di nylon
        da 4,55 €
        different shapes and sizes (see picture), shaft ø 2.35 mm
      • Lame per seghetti STS 230/E e STS 12/E
        2 Varianti
        Lame per seghetti STS 230/E e STS 12/E
        da 3,90 €
      • Ugelli per pistole ad aria calda
        2 Varianti
        Ugelli per pistole ad aria calda
        da 7,60 €
        stainless steel
      • Pasta per lucidare Proxxon
         
        Pasta per lucidare Proxxon
        da 3,90 €
        universal polishing agent with excellent sanding and polishing qualities, for metal and plastic
      • Set completo Proxxon per modellistica e incisione
         
        Set completo Proxxon per modellistica e incisione
        da 77,90 €
        Proxxon milling/drilling machine Micromot 50/E, basic transformer with 1 socket for Micromot plug, includes 34 bits and cutters of industrial or dental quality and 6 steel collet chucks (ø 1.0/1.5/2.0/2.4/3.0 and...
      • Punte trapano Proxxon in tungsteno e metallo duro
         
        Punte trapano Proxxon in tungsteno e metallo duro
        da 9,00 €
        milling drills (called "spear" drills in German), wear-resistant cutting alloy, shaft ø 2.35 mm, l (total) = 30 mm
      • Dischetti per troncare Proxxon a mola diamantata
        2 Varianti
        Dischetti per troncare Proxxon a mola diamantata
        da 9,50 €
        with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness
      • Molette lamellari Proxxon al corindone
        2 Varianti
        Molette lamellari Proxxon al corindone
        da 2,60 €
        various sizes (see picture), shaft ø 3.0 mm, given dimensions: ø x height
      • Lama per tagliapolistirolo Proxxon Thermocut 12/E
         
        Lama per tagliapolistirolo Proxxon Thermocut 12/E
        da 14,90 €
        easy to bend, anti-adherence coating, 1.5 Ω electrical resistance
      • Dischetti, tamponi cilindrici e ad ogiva Proxxon
        5 Varianti
        Dischetti, tamponi cilindrici e ad ogiva Proxxon
        da 3,30 €
        made from normal corundum, various grits, shapes and sizes (see picture), with tool carrier shaft ø 3.0 mm (except Proxxon No. 28983, 28981, 28989)
      • Punte-fresa Proxxon in tungsteno-metallo duro
        4 Varianti
        Punte-fresa Proxxon in tungsteno-metallo duro
        da 8,10 €
        wear-resistant, highly concentrated fine grit cutting alloy, various shapes, shaft ø 2.35 or 3.0 mm
      • Set completo Proxxon per lucidatura, 10 pezzi
         
        Set completo Proxxon per lucidatura, 10 pezzi
        da 13,50 €
        see picture, shaft diameter 2.35 mm
      • Spazzolini Proxxon a coppa in acciaio
         
        Spazzolini Proxxon a coppa in acciaio
        da 7,30 €
        various constructions with brush, cup and wheel shapes, shaft ø 2.35 mm
      • Morsetta Proxxon MS 4
         
        Morsetta Proxxon MS 4
        da 14,90 €
        die-cast zinc, three milled supporting surfaces, with slot that fits the adjustable fence of the bench drill TBM and the drill stand MB 140/S, horizontal and vertical V-slots in the jaw for round materials, jaw width...
      • Molette lucidatrici elastiche Proxxon
         
        Molette lucidatrici elastiche Proxxon
        da 5,65 €
        various shapes and sizes (see picture), shaft ø 2.35 mm, given dimensions: ø x height or thickness
      • Fresatore/trapano Micromot 50/E
         
        Fresatore/trapano Micromot 50/E
        da 34,90 €
        sturdy fibreglass reinforced polyamide housing with comfort sections in the grip area and a 20 mm collar that fits all Micromot system components, balanced motor with ground spindle that runs in a precision ball...
      • Molette lucidatrici Proxxon in feltro
        2 Varianti
        Molette lucidatrici Proxxon in feltro
        da 2,35 €
        various shapes and sizes (see picture), shaft ø 2.35
      • Dischi Proxxon in feltro
         
        Dischi Proxxon in feltro
        da 3,50 €
        with tool carrier shaft ø 2.35 mm, given dimensions: ø x thickness
      • Punte-fresa Proxxon in met. duro- vanadio- acciaio
        6 Varianti
        Punte-fresa Proxxon in met. duro- vanadio- acciaio
        da 5,10 €
        purpose-made and selected wolfram vanadium steel, shafts and milling tips manufactured from one-piece blanks, various shapes (see picture), shaft ø 2.35 mm or 3.0 mm (see picture again)
      • Montante Proxxon Micromot MB 140/S
         
        Montante Proxxon Micromot MB 140/S
        da 51,90 €
        surface milled table 120 x 220 mm, machined feeds and fittings, headstock is of die-cast aluminium (throat capacity 140 mm), chromed steel column (280 x 20 mm), depth stop, chromed feed lever with return spring,...
      • Set lame per fresatrice legno Proxxon
         
        Set lame per fresatrice legno Proxxon
        da 31,90 €
        Wear-resistant cutters made of carbide metal, different types, shafts are ø 3.2 mm
      • Spazzolini Proxxon a coppa in ottone
         
        Spazzolini Proxxon a coppa in ottone
        da 7,30 €
        various constructions with brush, cup and wheel shapes, shaft ø 2.35 mm
      • Seghetto a gattuccio Proxxon STS 12/E
         
        Seghetto a gattuccio Proxxon STS 12/E
        da 49,00 €
        sturdy fibreglass reinforced polyamide housing, powerful 12 to 18 V motor, includes two saw blades (course and fine) distribution voltage (power supply): 12 - 18 V stroke: 6 mm strokes per minute: controlled from...
      • Sostegno universale Proxxon Micromot UHZ
         
        Sostegno universale Proxxon Micromot UHZ
        da 25,90 €
        with die-cast zinc clamp for worktop up to 60 mm thick, holder with ball joint (turns and swivels in all directions), with 20 mm collar that fits all the Micromot system drill and milling machines, weighs 1.5 kg
      • Mandrino autocentrante a tre griffe
         
        Mandrino autocentrante a tre griffe
        da 5,40 €
        for all handheld MICROMOT machines (excluding the engraver GG 12, professional drill/grinder IB/E, long neck straight drill/grinder LB/E, drilling machine COLT 2 and flexishaft 110/P).
      Informazioni su Macchine a mano

      Proxxon Hand-held Tools

      The Proxxon company is a leading manufacturer of high quality hand-held and table top tools. Proxxon tools were not made to be put in drawers. They are made in such a way that the user will enjoy working with them over a long period of time. They are quiet and vibration-free. When used properly, Proxxon tools have an unusually long service life for an electric tool.

      Our product assortment contains a selection of machines from Proxxon comprehensive product line. We can, however, provide any Proxxon tools to our customers within a very short time span. If you are interested in any other Proxxon product please acquire a Proxxon catalogue or get the necessary information from the excellently made website www.proxxon.com.

      Our own experience has shown that the Proxxon repair and replacement part service functions wonderfully. Such commitment to service is another attribute distinguishing a leading market manufacturer from cheap suppliers! If, despite the high quality workmanship, some defect should arise, Proxxon will not leave you holding the bag. The staff at the Proxxon service centre reacts quickly and reliably.

      Practically every operating manual includes an exploded drawing of the tool or device. This helps the customer to identify and order the necessary replacement parts – it should be noted, though, that it is sometimes only possible to order pre-assembled sub-assemblies. From Germany you should contact Proxxon at:

      Proxxon Zentralservice
      D 54518 Niersbach
      Tel. 06575/78-125
      Fax 06575/78-101
      E-Mail: technik@proxxon.com

      In many countries Proxxon has partner businesses which are capable of performing repairs and delivering replacement parts – please note the related information found on the website www.proxxon.com. When making a return within the time limit of the guarantee, please do not forget to include your receipt.

      Questa è Modulor
      Modulor Newsletter
      Modulor uses cookies to provide you with the best experience on our website. By continuing to browse the site you are agreeing to our use of cookies.    More information